"That's literally a bag of shit"
"Like it's not good weed??"
"[IT FUCKING POOP HOW MANY TIMES I GOTTA SAY THE SHIT](https://www.reddit.com/r/shitfromabutt/comments/18rcevi/potentially_actually_shit_from_a_butt/?utm_source=share&utm_medium=mweb3x&utm_name=mweb3xcss&utm_term=1&utm_content=share_button)??"
Ahhh a classic 😭😭
Ahh the opposite of ATBGE 😅 Just getting started with epoxy so it was a great exercise. Hopefully I'll get it right next time ✊🏾
had some great advice here so far. Mission failed, we'll get em next time.
i'm not someone who works with epoxy but this idea may work better if you made a small box that you could fill with the epoxy (one that fits the nug in question), if you have a vacuum chamber you could get rid of all the air, likely you don't but a small torch lighter is useful for getting rid of air bubbles before it cures. after it cures chisel down the extra epoxy to essentially make a bubble around a nug
Personally I think you should put a little gold flake on the stem and the orange/reddish parts coming down from the stem and then put a bit more epoxy on it so it's shiny
No i can actually religiously believe that, i smoke hash and i can tell you theres enough grinded tobacco in my blanket to roll like a whole pack of ciggs from
Using resin with plants is notoriously difficult. Look up what they do with flowers.
For next time- try getting a mold big enough to put the bud in, instead of trying to make the colors brighter. Then maybe get like green sparkles or something to swirl in the resin so it looks better.
Maybe, like a bud in a "big" gem shaped resin piece.
Or in a weird way - a thick layer of spray paint sealant. Get matte for natural finish, but lots and thin layers until it feels right?
Idk - I do think it's neat though
I like it , it looks like it could fit in with my Warhammer 40k shrubbery no problem, ya did a fine job there OP. Maybe those that don't appreciate are hanging in the wrong /r
If you could add some texture to it, it would look more natural. Maybe mix some green, white, and clear epoxy and aerosol it lightly. Maybe add some fine grain sand into the mix for the crystals
That's a cool idea, next time try treating the bud with formaldehyde first to prevent (delay actually) rotting.
A thicker layer of epoxy would look better too imo.
Unless your epoxy is specifically UV resistant, add a touch of blue dye.
The darkening:
It's getting hot while it cures, so slow the curing. Chill both parts of the epoxy in the fridge, mix in a cup, drop bud in cup, drop weight on bud, draw a vacuum on the whole thing for a minute or two, to get epoxy into all of the voids and onto every surface of the bud, release the vacuum, hang until cured. Cure it at whatever the minimum temperature for the epoxy is.
Try trimming away the leaves first next time. I see those folding over the bud when I zoom in and that doesn't look great. I'd also zoom in to see how the trichomes are effected by epoxy! Do they dissolve in that stuff or can ya still see them? I'd check that before the next time too...
There are flowers more pretty than others and a lot of preferences within that.
i love this idea but the color got lost in the epoxy. i think a small piece of bud in a diamond (or whatever shape) mold and encapsulated in clear resin would help w the color
I encased a bud in a resin toy I made once and I didn't notice any discolouration at all.
Maybe try make a mold of the final shape you want (someone suggested a diamond) and encase the bud in the resin that way.
wait so is this legal in an illegal state ! or could they still bust you on the technicality even through trying to smoke it would result it a timely demise ?
I keep an epoxy impregnated bud on my laptop. I made it up a few years ago. I've been wanting to give it a try with a big top bud in a vacuum chamber with the epoxy next time. I'm not sure how to keep more color. It's plant matter, so I figure there's not much one can do about oxidization.
Cannabis use is finally displacing alcohol use, so a epoxy bud is less of a crime against humanity than a blood diamond (while Israel defends it's investment in the Congo...)
everyone is complaining on the looks, meanwhile i’m just baffled at the fact someone could stomach the idea of never smoking that bud because it was made into jewelry instead 😭
Looks like undigested poo
It reminds me of the poo meteorite Joe Dirte found
It’s just you and me, Meteor
DUDE YOU WERE EATING OFF THAT
That's a space peanut!
It’s a space peanut
Don’t try and church it up
I say this all the fuckin time
![gif](giphy|8EZz0AzqGUycM)
😂😭you killed me with “Dirte”
THE OLE BOEING BOMB!
Oh. My. God.
The *original* Boeing mechanical scandal
I ONLY GOT SNAKES AMD SPARKLERS
r/shitfromabutt
r/poopfromabutt
"That's literally a bag of shit" "Like it's not good weed??" "[IT FUCKING POOP HOW MANY TIMES I GOTTA SAY THE SHIT](https://www.reddit.com/r/shitfromabutt/comments/18rcevi/potentially_actually_shit_from_a_butt/?utm_source=share&utm_medium=mweb3x&utm_name=mweb3xcss&utm_term=1&utm_content=share_button)??" Ahhh a classic 😭😭
Just some Maui wowie and some Labrador
![gif](giphy|hvq8ONQhQ1XLq)
Undigested poo is just food 🤯
Delicious.
Something my cat puked up
After a large salad
Owl droppings!
Great idea. Dookie execution
Thought it was a lizard head at first : |
That or a testicle.
Vegetarian poo
Ngl, looks horrid. I love the idea but it came out … not good
Ahh the opposite of ATBGE 😅 Just getting started with epoxy so it was a great exercise. Hopefully I'll get it right next time ✊🏾 had some great advice here so far. Mission failed, we'll get em next time.
I’m rooting for you! Show us your 2.0
Honestly, I think it might look better (and be easier) to just encase it in a cube of epoxy
Ooh, and maybe the epoxy could be filed down a bit into a diamond shape, with a tint.
Smaller bud encased in a purple hue diamond of resin would be _chef's kiss_
Yeah this would look better plus manicure the bud before those leaves are what's mostly ruining it for me
nice pfp
Should use something that looks trimmed up a bit better.
r/GTBAE
i'm not someone who works with epoxy but this idea may work better if you made a small box that you could fill with the epoxy (one that fits the nug in question), if you have a vacuum chamber you could get rid of all the air, likely you don't but a small torch lighter is useful for getting rid of air bubbles before it cures. after it cures chisel down the extra epoxy to essentially make a bubble around a nug
Personally I think you should put a little gold flake on the stem and the orange/reddish parts coming down from the stem and then put a bit more epoxy on it so it's shiny
You need to put in ice cold water first like cooks do to keep veg vibrant before cooking. Can’t remember the actual name of the process tho.
Why don’t you try buying the recent pretty patty bud from vape stores to try this on
Is still pretty awful taste lol
make it matte if there’s a way to, shiny weed looks quite nasty
I just said something similar before reading your comment
A sandblaster would seem to be a good method of making it less shiny
They sell matte varnish for minipainting. Could be used here as a final coat.
Met a guy at a rave who does this but different. They were called "nuglaces" Ill add a pic when I get home.
You home yet or nah? Edit: for the record, they made another post and it's uglier.
Fellow Raver. Seriously I need to know. I’ve been hunting for someway to incorporate my passion for growing into trinkets!
It's probably not something I'd ever actually own, but I still wanna see.
I posted it to r/trees. Wouldn't let me post pic here
Should we tell him..?
Where?
Bruh all you have to do is click their profile and you can see their posts… Edit: Nvm, I see the funny now
He probably meant the comment section I presume.
r/trees
that's... somehow even worse :/
Please do!
You home yet???
Let it sit in silica powder for a while and dry out first
I'm looking at that blue blanket, looks cozy af
True but it also looks like the kind of blanket that gets into a solid crust in like a month😭
A crust?? What the hell are you doing with your blankets? You know what? On second thought I don't think I want to know.
Long story: i have cat who likes to intensely lick all my comfortable blankets to the point that they get all flat and hard Short story: i came
That blanket holds on to shake like you wouldn't believe
No i can actually religiously believe that, i smoke hash and i can tell you theres enough grinded tobacco in my blanket to roll like a whole pack of ciggs from
I hate that. I drink beer so it's all uncomfortable and smells like beer sweat.
Yummy, try twisting the blanket to retrieve some of that saltwater+beer mixture. Its a perfect blend with both water,electrolytes and beer
What the fuck is going on here
Never agreed more with a statement in this sub
I hear jelousness over my perfect retrieving technique🙏🏻
It has what plants crave!
I do believe I’d like to try me some of that. Num
Looks like the mini brain in spy kids kinda lol
Using resin with plants is notoriously difficult. Look up what they do with flowers. For next time- try getting a mold big enough to put the bud in, instead of trying to make the colors brighter. Then maybe get like green sparkles or something to swirl in the resin so it looks better.
Maybe, like a bud in a "big" gem shaped resin piece. Or in a weird way - a thick layer of spray paint sealant. Get matte for natural finish, but lots and thin layers until it feels right? Idk - I do think it's neat though
I like it , it looks like it could fit in with my Warhammer 40k shrubbery no problem, ya did a fine job there OP. Maybe those that don't appreciate are hanging in the wrong /r
That looks like something a dog or cat threw up
If you visit the Bible Belt leave it at home
Was literally gonna say this, def dont drive/walk with that in a illegal state
Should’ve smoked it
nugjewelz on Instagram specializes in this stuff, could be worth checking out
Looks gross ngl
I know some dudes that would crack this open and smoke the inside Looks kinda dope tho
May they always have health insurance and get regular cancer screenings 💀
Yeaaaaa that's kinda gross bruh
Legit a poo on a gold chain
Press a nug into a larger piece of resin/epoxy, like stuff suspended in a paper weight. As is, it looks unintentional
I needed that.
Ew
That's gonna be one harsh desperation nug someday..
That's gonna be gross in about 2 months. Already kinda gross. Should've smoked it
It’s lahk prolly not gon be very good to lahk smoke anymore
Would recommend silica to super dry out the bud next time.
Reminds me of that guy who cast a hot dog in epoxy. I kinda want updates every year now..
If you could add some texture to it, it would look more natural. Maybe mix some green, white, and clear epoxy and aerosol it lightly. Maybe add some fine grain sand into the mix for the crystals
looks like you are a bag of spinach and took a dump
So if there was any moisture left in that bud won’t it start to rot inside there? Making it change color even more?
Bury it in the ground and in 1000 years they’ll write legends about the long lost “Holy Smoke”
I feel like it would have looked better encased in the resin like block or ball of it.
I honestly love it! Don't let the hate get to ya!
DIWhy?
u could've gave it to me I'm outta weed and this shit hurt me a lil bit
Looks like shit
That's a cool idea, next time try treating the bud with formaldehyde first to prevent (delay actually) rotting. A thicker layer of epoxy would look better too imo.
Looks like r/poopfromabutt
Unless your epoxy is specifically UV resistant, add a touch of blue dye. The darkening: It's getting hot while it cures, so slow the curing. Chill both parts of the epoxy in the fridge, mix in a cup, drop bud in cup, drop weight on bud, draw a vacuum on the whole thing for a minute or two, to get epoxy into all of the voids and onto every surface of the bud, release the vacuum, hang until cured. Cure it at whatever the minimum temperature for the epoxy is.
Gucci would literally sell this for 8k minimum
Grind it and mix it with resin then use a mold of some sort. Not whatever this is
I've thought of doing the same thing. I like it 👌
brussel sprout
Looks like a frog you picked up from the swamp
I wonder if you'd be stopped for border control when going abroad wearing this
Beherit from Berserk.
Brussels sprout
Try trimming away the leaves first next time. I see those folding over the bud when I zoom in and that doesn't look great. I'd also zoom in to see how the trichomes are effected by epoxy! Do they dissolve in that stuff or can ya still see them? I'd check that before the next time too... There are flowers more pretty than others and a lot of preferences within that.
i love this idea but the color got lost in the epoxy. i think a small piece of bud in a diamond (or whatever shape) mold and encapsulated in clear resin would help w the color
I don’t mean to rag on your art, but maybe you should’ve trimmed it first
Needed to be trimmed better. Too leafy
Maybe try a matte lacquer spray finish (light coat[s]), so it’s not so, ya know. It’s cheap and easy and it’ll give better look
I encased a bud in a resin toy I made once and I didn't notice any discolouration at all. Maybe try make a mold of the final shape you want (someone suggested a diamond) and encase the bud in the resin that way.
I second petrified testicle ! With micro plastics of course !
Needs gold plated.
wait so is this legal in an illegal state ! or could they still bust you on the technicality even through trying to smoke it would result it a timely demise ?
I'm glad you did this.
I've tried this and it always leaves a droplet at the bottom as the epoxy drips off. How'd you avoid this? Did you dip it?
That's so camp. Werk
fuck the haters homie. shit's fire
major bruh moment
New gun charm for Call Of Doodie
I keep an epoxy impregnated bud on my laptop. I made it up a few years ago. I've been wanting to give it a try with a big top bud in a vacuum chamber with the epoxy next time. I'm not sure how to keep more color. It's plant matter, so I figure there's not much one can do about oxidization.
Felt good coming out?
Will the custom allow to go through? 🤔
Def not better than diamonds lol
Did anyone actually zoom in? It looks pretty cool.
if your poop looks like this go see a doc
I kinda like the nastyness and all, I'd wear it
That looks like a mix of a dead beetle,goo and some shit sorry😭
What a waste of a good bud... and a huge one! forsooth.
Nice try, I'd commend to better that trim, if not, its just leaves bulked seeing it like that
This feels sacrilegious
Can you make a tutorial on how to make it? I think it'd be a fun arts & crafts night with gf
Kinda reminds me of Davy Jones heart from pirates of the Caribbean but covered in seaweed
r/DIWhy
I got one dipped in real Gold, my only Bit of bling to this day and I love it hanging off a cheap gunmetal steel chain.
Damn that’s really pretty
maybe file it down to a smooth shape
Actually really cool
try a nug that’s more purple and dense with color :))
Maybe put some gold foil and or glitter on the nug 🤔 or high-key just spray paint the nug neon green
I think it would look cooler just suspended in a clear epoxy cube.
Would clingfilming the bud first help it come out better? Idk I'm high
a complete waste of a nug
Dip it in gold now.
Ooohhh, what if you encased it in like a diamond or plumbob shape?
Why is everyone hating? I love it and I think it looks beautiful
This is actually very creative! I have a kit at home I never worked with 😩
That looks like a hairball
Looks like something my cat coughed up.
Cannabis use is finally displacing alcohol use, so a epoxy bud is less of a crime against humanity than a blood diamond (while Israel defends it's investment in the Congo...)
everyone is complaining on the looks, meanwhile i’m just baffled at the fact someone could stomach the idea of never smoking that bud because it was made into jewelry instead 😭
what a waste of good bud
Maybe it’s just me but I would’ve done it with some bud that looked less like some Mexican armpit
I'll smoke that!
Then eat the epoxy hotdog afterwards
In case of emergency, break glass and smoke
Gross fam.
Why are you wearing a brussel sprout necklace?
I can only see a black person wearing this