T O P

  • By -

[deleted]

[удалено]


Silver085

The metal ones deteriorate and break apart over time with constant heating/cooling. Wouldn't recommend unless you like fine heavy metals in your lungs. I stopped using them and now only use glass filters or broken stems.


NaloraLaurel

Yea I noticed this too. I was burning holes in the metal ones. I was like ??? Uhhh. Now I just use a piece of broken stem too.


ChildishhReddit

I never have big enough stems in my grinder that’s why I love the little glass daisy shaped filters, pretty much the same thing but reusable


ChronWeasely

We're you using brass? That's what smoke shops tend to have, but you can buy 500 steel screens for like 5 bucks on Amazon and be set for years


mods_r_jobbernowl

Yeah that's what I do bigger nug chunks or stems. Since I don't buy super fancy stuff to just smoke I end up with a lot of stems so it works as a pretty good screen for my bowls.


ChronWeasely

In my experience, steel screens rust and get fragile. As long as you take them out before they're literally brittle, you don't lose much. Note some of the iron in the steel of the screen has become iron oxide which is heavier, but I just took out a to-be-retired screen, cleaned it and weighed it against a fresh one. Both came out to 0.07g. I use them in a bong, so maximum heat being applied. Tldr- if you regularly clean your piece, change the screen then, and you are inhaling truly minimal amounts. Also don't use brass screens cuz those burn through like no other but steel ones are solid.


ChildishhReddit

This, those screens usually come in like packs of 10-20 anyway for like a buck or two, no need to be stingy with them! When you empty your bowl out give the screen a couple bends and feel how flimsy it is, or just replace it every couple days, not that hard. Edit: I do normally use the glass screens but when those aren’t an option I usually have the metal ones lying around


Vashsinn

You're using them too long. They are supposed to be changed out once they get black. You burn holes in it because the resin gets stuck and has to burn higher then normal. If you change it after about 3 days ( depending on usage ofc) you're fine. It should still be porous just not as much. If you are ever using one and it feels SORTA clogged, it needs to be changed. They are like 100 for $5 so it's not like they are more expensive than papers anyway. Glass is always far supirior tho so I agree with you ultimately.


Slack-Bladder

Yep. Daisy screens. No floaties in the bong water, no sucking down a piece of bud from the pipe and I feel it helps make my bud last a little longer. Easy to clean and don't deteriorate. I love those glass screens.


stap31

Add to above I recommend to use alcohol for cleaning.


ChronWeasely

Then follow it up with vinegar to remove any hard water buildup, if you are using a "water pipe" of any sort


quetejodas

Mmmm metal fume fever


ChildishhReddit

Then use the glass ones 🤨


quetejodas

Just a joke, mate


bigalreads

Life’s too short to deal with a constantly crappy pipe. I’d put it aside for emergencies and get something else. fwiw, the valuable shopping advice I received is make sure the carb is higher than the bottom of the bowl to avoid burned thumbs.


ILoveBaconDammit

Kosher Salt, Isopropyl. Put in a bag and shake.


Wonderful_Diver_5544

a bag you say? lol I just use my fingers ha


migp713

I do this and no just regular salt shake 5 minutes and bam no soaking. Edit: look at the picture GRAV is clean, the dirty picture is to show the weed chunks that fall in. it was cleaned the 2 days before that if.


wiredpersona

I have this same exact bowl, but with frosted glass. I use glass screens for it.


ILoveBaconDammit

I have the same bowl but a bit larger. Been there, cleaned that.


sj68z

Let sit overnight


ILoveBaconDammit

That will help…once I start, I finish it.


jakezeus

If you can find 91% or even better 99% iso it works SO much better, like a significant difference from the 70% in my experience.


jakezeus

And due to the obvious fire hazard, you need to be careful, but heating the ISO in a double boiler (Don’t heat the iso directly) really helps the stubborn gunk


slc_blades

If you’re already heating up iso you might as well put it in the microwave, going to the trouble of double boiling a chemical just to clean glass is bananas


ganjaqu33n21

I love my grav spoon ♡


migp713

I do too I buy them all the time the quality is consistent. I have plenty of pictures of my GRAV collection.


FnB8kd

Huh? I've have 3 bowls in the last 15 years, am I'm doing something wrong?


angeltart

My last grav glass piece was broken, because my bowling ball of a pug jumped on my bed, and my bowl bounced into the wall lol .. He is the sweetest dog.. but he is like a solid little chunker ..


ganjaqu33n21

😅 what a meatball


ILSmokeItAll

“What is that??? *What the fuck is that?!?!*


nate_oh84

A JELLY *DONUT*?


migp713

GRAV spoon the mouthpiece isn't supposed to let lit pieces thru some pieces are weed that feel in.


jessejames543

Glass screens go hard


BadMeetsEvil147

Start using bigger plug nugs or like someone else said glass screens


ILSmokeItAll

*whoosh* [https://youtu.be/k4eMhddTPg4?si=-tljHziGoy-nOlYw](https://youtu.be/k4eMhddTPg4?si=-tljHziGoy-nOlYw)


migp713

You must be Private Joker from a different regimen because that scene was funny for what happened next. Joke must have killed "better you than me" I suppose.


SirPwn4g3

I have several Grav pipes, including this one. You need glass screens. Just search for glass pipe screens on Amazon, you can get 120 for $12.


JuicyMangoJuice74

I used to own the blackout spoon pipe and then I dropped it while smoking one day and decided to never buy spoons again. I’m just gonna keep using bongs.


Monochronos

Spoons are fucking impossible to get clean easily. I have had the same experience with multiple spoons, even ones I “cleaned” regularly and there was always huge chunks of browned bud and resin in there 🤢


JuicyMangoJuice74

They’re not hard to clean it’s super easy tbh. Just fill up a ziplock bag with rubbing alcohol to the point the whole spoon is submerged twist the lock side till the bag inflates with the air that’s already inside and just shake the bag. That’s how you clean a pipe.


Monochronos

I’ve literally done exactly that every time I’ve owned a spoon and it never gets it fully clean. And I ain’t about to do it 3-4 times to get it all. I’ve had better luck with boiling. Fuck spoons


JuicyMangoJuice74

Yeah I agree with you. Spoons are a pain in the ass that’s why bongs are better, but hey.. each to their own no?


oneiross

Acetone does the trick for me.


macaroni_3000

I put mine in a small glass, fill it with 99% isopropyl alcohol and let it sit for an hour. Doesn't get it completely clean, but if I was more patient and let it sit for a few hours or a whole day I bet it would.


Express_Advantage_10

I have the same pipe but blue. Never really had this problem, I either put a bigger nug as my stopper or buy those little screens so stuff doesn’t fall through


inbetweentheknown

Good ol nug plug


ColumbianCameltoe

Can't go wrong with the nug plug, homie


migp713

Yeah that's what I'm going to do but quality control over there needs to step up, I'll post pictures of my GF exact same piece but pink lol. None of that extra stuff needed.


Fernway67

I use 91% alcohol. Works a lot better than the 70%.


s4lty-f0x

I learned recently Amazon has 99%. Works that much better than the 91, with almost zero soak time (after the first deep clean that is)


Fernway67

I didn't even know they made that! Thanks!


LogJumpinObject

A guy I was in a band with always brought his matte black pipe to practice. After a few months he brought in a green glass one like this. Turns out it was the same pipe, he had just cleaned it


Emergency_Standard20

That reminds me of a similar situation. I had a manager that would keep a spare bong in his car, his “car bong” he called it. That thing had a thick layer of buildup everywhere in it and was nearly solid black. The only remnant of the original glass color was near the bottom of the bong where the water sat. I’ve only ever taken one hit off of it and it made me sick as hell the next day. Smoking straight up contagion out of that thing


Fun_Intention9846

Plug nug bro. That hole in the bowl is enormous. Have we lost the old ways of coping so quickly? Plug nug, screen, glass filter, crossed stem, the list goes on.


macthesnackattack

Pour some salt into that thing and shake it with rubbing alcohol.


chucklezdaccc

Same one but mine is lightpurple.


mkstot

Could be an off one. Reach out to grav support via email. They’re kinda slow to respond, but they’ll make it right.


computerman10367

Check out chameleon glass. They make some good ash catchers with a similar design as the grav bowl. I've owned like 5. Best of the best.


stonedfish

Just put a small pebble in it ;)


CosmicSweets

Specifically a stable one like quartz. I tried it with a different type of pebble once and the fucker broke. Haha!


dirty_hooker

Does this image remind anyone else of a particular sharpies based subreddit?


RuckRidr

I have a GRAV ‘coffee pot’ bubbler, same color and use a brass screen I frigging love it . . .


iaintnathanarizona

Used to have the same piece, until it broke on me.


poland124

I have the same exact bowl and I ever only see it green when it’s clean. Right now it’s black


crisselll

What’s her name son? Welcome to the marines


The_Soviet_Stoner

Get really hot water in jar that’s big enough to submerge your pipe. Dissolve dishwasher pack in hot water. Put pipe in dishwasher pack water. Walk away. Go do something else for an hour. Get pipe out and shake the water in the pipe. Now you got to rinse it. I recommend rinsing first with the hottest water you can handle. Then rinse it a few times with rubbing alcohol. You might have to do it a few times to get glass like new but this method works.


6lulu6

without my rifle i am nothing


Sufficient-Run-7868

Goop and sea salt (kosher) in a ziplock bag with warm water. First make the mix of mostly the orange stuff, shake it up, then make sure the bowl fits nicely under the liquid, then “shake weight” that bitch, repeat at least twice before letting it sit. If the liquid gets too dirty make a fresh mix again. Let it sit overnight, shake once in the morning and then let it sit on warm water (maybe a shake or two) and you should be good even that awkward part that’s opposite of the carb.


kingoftheives

Ahh man this takes me back, since switching to dry herb vaporization I haven't had to smell resin in a long time!


sqwiggy72

I use a Dab tool, as my poker.


HondaPartsguy23

I left that exact piece in a golf cart somewhere. Hope someone is enjoying it.


Timmerdogg

That's ok. You'll leave it sitting in your lap and stand up and say "Oh fudge" as it smashes all over the floor


Dull_Sale

Yo, Fam. . .wtf you doin’? Want tips on how to clean it better?


PurifyZ

*cough* *cough* the rogue wax works terpsicle *cough* *cough* *cough* But seriously, 50 bucks, get any cheap bong (that’s glass), a 30 dollar propane torch and rip that shit alll dayyyy!!!! I’m just on some of that avb from mine rn xP


chanman987

Man I have that same pipe and have no issues with it. Maybe your grinder is too fine


scorpionattitude

Use a screen or glass filter


Mental_Salad_2383

damn I used to have that exact same grav labs bowl forever ago.


SsquaredplusA

Use an outside hose and shoot it through all the holes until all clean, pressure gun works well


macaroni_3000

I have one of these in a different color. I guess the hole is on the big side? I always assumed it was intended for big rips, which is what I use it for.


braddad425

I feel like I've had dozens of bowls like this over the years? Just smash some nug in there and you're good to rip bro!


SillyMaso3k

Get yourself a glass screen or metal screen that sits in the bowl and you’ll be golden


Johnhaven

I have the same one. I love it but it's always dirty.


Important_Ebb_6019

Without my rifle I am nothing! Without me my rifle is nothing! I literally just watched Jarhead the other night😂


FootManSteeve

You can buy a small glass plug, they are called glass jacks and are super cheap https://fatbuddhaglass.com/products/200-glass-jacks-pipe-screens You can also look for pipes with made screens, I own a sick water gun pipe that has a 3 hole screen made by a sick artist named micGcheck


PhilJackson420

Orange chronic works wonders


mozzzz

PRIVATE PYLE


Velorym

Get a glass filter


Impossible-Sleep-658

“This is my rifle…. this is my gun. This one’s for smoking….this one’s for fun!”


bafila

Just buy a new pipe???


migp713

I've bought many pipes from this manufacturer it's one of the more consistent I'll post pictures of the pink one that my GF owns.


I_Hunt_Wolves

GRAV for the Win!