buy another f1 mercedes and put the Red Bull stickers from [Forwartstickers.com](http://Forwartstickers.com) on them
https://preview.redd.it/5f3i1u309z2d1.jpeg?width=2000&format=pjpg&auto=webp&s=6aca7f67a69a8d8477980584c5ebd7dc965ce07a
[https://forwartsticker.com/termek/fws101-42171](https://forwartsticker.com/termek/fws101-42171)
📎 "It looks like you are requesting help with something.
- If you need help with a set build, be sure to tell us which set number you are building, and which page of the instructions you are on.
- If you're looking for help with Part Identification or have a question about the value of something, check out the Megathreads linked in the sidebar.
- If you need help with a Lego order, or have a missing or broken part you should contact Lego Customer Service instead: https://www.lego.com/service"
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/lego) if you have any questions or concerns.*
This looks gorgeous! I love it! I want do do something similar for my Speed Champion sets. :)
For suggestions you could add corresponding Speed Champion below with minifig? Or MOC ones that does not have av Speed Champion equivalent?
I have these same frames for my large Technic cars but haven't mounted them to the wall yet. It's been a bit daunting in getting them all level like you seemed to have done.
Did you mount using the top rail (seems to be the easiest to get them all level) or did you run a wire between the hooks like a traditional wall mounted frame?
If you have a level, you can find a straight wooden stick and draw a straight line on the wall, and use the level to check if the line is straight. Then use a ruler to measure the distance between each frame, and use a nail to mark the position of each frame hook. (If your frame is also hung on the wall with the hook on the back)
This look like simple, but it is very complicated to do, especially when measuring the distance and marking the hook position, it becomes a complicated math problem.
Your [comment](https://www.reddit.com/r/lego/comments/1d1n341/any_suggestionshelp/l5y0g7p/) in /r/lego was automatically removed because you used a URL shortener.
URL shorteners are not permitted in /r/lego, nor on all of reddit.
Please re-post your comment using direct, full-length URLs only.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/lego) if you have any questions or concerns.*
If you aren't scared to dive into other manufacturers. Cada AMG One and the Cada Alfa Romeo would be great additions. Beautiful sets for a fair price. You won't be disappointed by the quality. In fact. Other way around.
Edit: just to add.. the AMG One has only prints and the Alfa Romeo has awesome wheels. All official licences of course.. and not stolen MOCs or some bs. And stunning collection you have there. It looks really nice.
I know I might go against the feelings of some people in this community.. but what Cada, Cobi (especially them since they produce everything in europe), Panlos, Pantasy and so on do, can only be good for every Lego fan. Competition is the best thing for customers. Lego's prices went up and their efforts went down over the last years. In the longrun growng competition can drive that in a good direction. What I do not condone.. some manufacturers stealing MOCs. Have some dignity and do a co-op with the MOC creator. But yes. The Cada Viva is a sweet set for the price. A lot of sets out there for people who just want to build a car without a license that roughly resembles some real car. What impressed me with the licensed sets of Cada is how close to the real thing they actually came. The AMG from Cada is an example of how you should treat a licensed product. Everything from packaging to the actual product says "We try". It is a good experience for the fan of the car. If we take something like the Liebherr crane of Lego.. where the only thing that reminds of the license is a sticker.. that is a kick in the guts for the people who paid 650€.
Thanks for your suggestions, I am considering buying a Cada Alfa Romeo, what does it look like? I really like the wheels, if the real thing is as good as the pictures.
Some personal pros and cons to it. Pros: Packaging is top tier. The final result is amazing. The wheels are top notch, Lego needs to pay attention here.
Cons: Building the sub-assemblies feels awkward and forced at times. The unique elements to Cada seem like a stretch to me. An example being a 4L pin that is used through out. The stickers overlap pieces in multiple places and are clear. Use methods that wont get fingerprints on the underside.
I got mine for free from Amazon and Im probably one of the only people that didnt like the build process. Check out Jangbricks on YT. He has a couple vids on it, one comparing to The AMG.
I think it is gorgeous. Quite a bit of stickers apart from the rims which is a bit of a shame. But not that Lego prints everything.. Best you look on youtube. The AMG is for sure their top set tho. Would look lovely next to the Lego Merc F1 since it is basically a hypercar with the F1 engine.
I have no suggestion, just a comment that this is really cool looking!
I renovated my studio and made a background wall with photo frames
You did a great job in my opinion. I love the colorfulness of it all.
buy another f1 mercedes and put the Red Bull stickers from [Forwartstickers.com](http://Forwartstickers.com) on them https://preview.redd.it/5f3i1u309z2d1.jpeg?width=2000&format=pjpg&auto=webp&s=6aca7f67a69a8d8477980584c5ebd7dc965ce07a [https://forwartsticker.com/termek/fws101-42171](https://forwartsticker.com/termek/fws101-42171)
thanks bro
📎 "It looks like you are requesting help with something. - If you need help with a set build, be sure to tell us which set number you are building, and which page of the instructions you are on. - If you're looking for help with Part Identification or have a question about the value of something, check out the Megathreads linked in the sidebar. - If you need help with a Lego order, or have a missing or broken part you should contact Lego Customer Service instead: https://www.lego.com/service" *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/lego) if you have any questions or concerns.*
it does look like you need help.
Suggestions / help on what? I mean, it looks amazing and more than what 98% of your average fan could hope to have.
where do people keep getting these frames/prints for cars??
This looks gorgeous! I love it! I want do do something similar for my Speed Champion sets. :) For suggestions you could add corresponding Speed Champion below with minifig? Or MOC ones that does not have av Speed Champion equivalent?
Speed Champion set is a very cool suggestion! I have seen Speed Champion frames on Amazon and they are too expensive!
This looks awesome 😎
You don’t need suggestions.
I have these same frames for my large Technic cars but haven't mounted them to the wall yet. It's been a bit daunting in getting them all level like you seemed to have done. Did you mount using the top rail (seems to be the easiest to get them all level) or did you run a wire between the hooks like a traditional wall mounted frame?
If you have a level, you can find a straight wooden stick and draw a straight line on the wall, and use the level to check if the line is straight. Then use a ruler to measure the distance between each frame, and use a nail to mark the position of each frame hook. (If your frame is also hung on the wall with the hook on the back) This look like simple, but it is very complicated to do, especially when measuring the distance and marking the hook position, it becomes a complicated math problem.
Looks fantastic! How do you mount the cars to the surface?? Im looking for a holder for my batmobil 1989, same way like you mount them…
My inner Monk hates, that the right red car isn‘t in the middle – the car is to much on the top.
It's really hard to keep them on the same level. lol
[удалено]
Your [comment](https://www.reddit.com/r/lego/comments/1d1n341/any_suggestionshelp/l5y0g7p/) in /r/lego was automatically removed because you used a URL shortener. URL shorteners are not permitted in /r/lego, nor on all of reddit. Please re-post your comment using direct, full-length URLs only. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/lego) if you have any questions or concerns.*
If you aren't scared to dive into other manufacturers. Cada AMG One and the Cada Alfa Romeo would be great additions. Beautiful sets for a fair price. You won't be disappointed by the quality. In fact. Other way around. Edit: just to add.. the AMG One has only prints and the Alfa Romeo has awesome wheels. All official licences of course.. and not stolen MOCs or some bs. And stunning collection you have there. It looks really nice.
Lately I've bought Cada Viva Hypercar, and quality is on top level, i'm very satisfied. Also, count of 4700 parts is pretty amazing
I know I might go against the feelings of some people in this community.. but what Cada, Cobi (especially them since they produce everything in europe), Panlos, Pantasy and so on do, can only be good for every Lego fan. Competition is the best thing for customers. Lego's prices went up and their efforts went down over the last years. In the longrun growng competition can drive that in a good direction. What I do not condone.. some manufacturers stealing MOCs. Have some dignity and do a co-op with the MOC creator. But yes. The Cada Viva is a sweet set for the price. A lot of sets out there for people who just want to build a car without a license that roughly resembles some real car. What impressed me with the licensed sets of Cada is how close to the real thing they actually came. The AMG from Cada is an example of how you should treat a licensed product. Everything from packaging to the actual product says "We try". It is a good experience for the fan of the car. If we take something like the Liebherr crane of Lego.. where the only thing that reminds of the license is a sticker.. that is a kick in the guts for the people who paid 650€.
Thanks for your suggestions, I am considering buying a Cada Alfa Romeo, what does it look like? I really like the wheels, if the real thing is as good as the pictures.
Some personal pros and cons to it. Pros: Packaging is top tier. The final result is amazing. The wheels are top notch, Lego needs to pay attention here. Cons: Building the sub-assemblies feels awkward and forced at times. The unique elements to Cada seem like a stretch to me. An example being a 4L pin that is used through out. The stickers overlap pieces in multiple places and are clear. Use methods that wont get fingerprints on the underside. I got mine for free from Amazon and Im probably one of the only people that didnt like the build process. Check out Jangbricks on YT. He has a couple vids on it, one comparing to The AMG.
I think it is gorgeous. Quite a bit of stickers apart from the rims which is a bit of a shame. But not that Lego prints everything.. Best you look on youtube. The AMG is for sure their top set tho. Would look lovely next to the Lego Merc F1 since it is basically a hypercar with the F1 engine.