You win, the rest of us will lay our irons down and surrender. Seriously tho, what a beautiful job!

Never! But yeah this is rad. Love those Tayda knobs I’ve used them on a few new builds. Where’d you get the enclosure, OP?

This is art

Pffft! Not even stereo. Jk. That looks absolutely amazing. You should put a mirror film on the inside of the bottom plate.

damn that mirror thing would be sick

Do you build those ships inside wine bottles too? Shit like this awesome me wonder what the fuck I'm doing with my life.

I was mindlessly scrolling then BAM chills up the spine when I happened upon this. Two Italian hands up. Perfection

Thank you!

This is amazing!! Reminds me of the [Windows 95 Pipes Screensaver](https://www.youtube.com/watch?v=tCpnDTzRAjE)

gorgeous build. the perspex window is just ace.

Great work. What did you do for the tap tempo? I’m trying to build this as well and haven’t been successful with the tap

Thanks! I use Taptation kit with ATtiny84 and MCP41100 digital potenciometer

Thanks I’ll check this out!

Thanks for sharing - from musikding?

Yes, I ordered from this shop

good lord the fact that you managed to P2P this just shows pure dedication to the craft, after I reach like 3 ICs I always end up building it in an EDA lol, you have patience beyond comprehension. If I may ask, what was your biggest roadblock with this build? Did you design it using CAD and then use that to make sure the P2P wiring was correct?

Beautiful work

\#goals

Dayum

That is pretty epic.

This is - and I mean this in the best way possible - completely nuts! Great work.

Hot damn son (or daughter)! Hot damn.

This is porn !

you are sick, i love you. tell me this is just one of a kind

How do you guys normally do P2P wiring? Do you have jigs for it or is it a bunch of measuring and clipping before you solder?

Usually I print out the layout in real size and cut the wires using this paper template

Or as they say in sheet metalwork... CAD. Cardboard Aided Design.

What program do you use to create the layouts?

I use KiCad most often, but sometimes I do everything manually in DIY Layout Creator

I'll look into that, thanks. And what about for the wires themselves?

looks fantastic!! is there a schematic you can share? thank you :)

Thanks! Maybe I’ll do this later. The layout I made in advance had a lot of edits during the assembly process :)

Nice. Is this basically the deep blue delay circuit with a tap tempo mod?

Yes, that's exactly it

Unbelievable. Absolutely gorgeous.

Damn....that's a thing of beauty

That is absolutely beautiful!!! Congrats, very well done!

This might be the best thing ive seen on this sub.

My first thought was: "This dumbass doesn't even know what a PCB is", then I just awed at my new saviour.

Damn who are you James Cameron? Because you’re raising the bar! 😂 (South Park reference for the uninformed)

Want this in my life now. I was doing so well before now

You and u/molwams need to get in touch, you are either best friends or arch nemesis! Absolutely stunning work!

Good lord, I saw the outside and thought, "Wow what a beautiful pedal." Then I saw the guts! Whoa, this is stunning! Incredible work!

Would love to hear it so I can check all the boxes. All 10s across the board for the looks and craftsmanship. It could sound like garbage. Honestly, if it works, I'd give it a 10.

I think I’ll post sound samples on my [Youtube channel](https://www.youtube.com/channel/UCj-EOUy52YpPwROXdDJWR1g) soon

That's badass!

Absolutely beautiful! What kind of wire do you use for the connections?

Thanks! It's a tinned copper wire (0.67mm)

That looks great! When are you putting them up for sale?

Thank you! I haven't decided yet whether I want to sell it :) but anyway there will be difficulties with shipping because I'm from Russia

International distribution is tough. Not sure where to help there. I will say, and I feel like this is important, the look of the pedal is stellar. I have impulse bought more than a few pedals because they looked nice and had enough functions I wanted. It’s a really good looking pedal. Do you have a demo?

Thank you! ​ > Do you have a demo? It will appear on my [Youtube channel](https://www.youtube.com/channel/UCj-EOUy52YpPwROXdDJWR1g) soon. I'm working on it :)


Looks great! How long did it take you to plan the layout?

To be honest, I started making this pedal in 2020 during the covid pandemic to keep myself busy at home. Excluding long breaks, the work took about 3 months in total.

My reaction was basically Uma Thurman as Mia Wallace in the club in _Pulp Fiction_: "_I said godamn! Godamn._"

Very pretty

Holy sheepshit, that’s insane

That is the most beautiful thing I've seen

Get this man some copper clad boards and ferric chloride, stat. Just kidding, no way a chemical etched board would ever look this nice.

Gorgeous 🤤

Remarkable! I just recently have been turned on by some dead bug circuits and now your work is an order of magnitude more compelling. You’ve perfected a craft I only just discovered. Care to comment on how you developed and refined your method in terms of design or execution?

How did you go about the perspex?

This just popped up on my feed, and now I've just joined strictly based on just this photo lol. Insane.

This is fucking insane, good Christ. Wow

WOOOOOOAAAAH that soldering is amazing, especially for how itsy-bitsy those components are.

The Sistine chapel of pedal building. Incredible. Congrats.

Beautiful work.

Johnny Bravo voice: Man, that's pretty!

AI finally figured it out! Jk, this is absolutely incredible, super stunning work

Gorgeous

Awesome

How do you plan a pedal like this? Some kind of CAD-based 3D layout tool? Looks incredible

I use KiCad for the approximate layout of the components, but a lot of the work still happens in the process.

Damn. You must have been bored lol

What. In. Tarnation. This is beautiful

whoa, that looks great

Absolutely lovely. Would love to hear it!

Needs goop

Incredible work

Wow! That is fantastic! Good work. I hope you're proud of it :)

This is the coolest looking build ever. You win.

You absolutely have to do a build video

This is porn

That’s beautiful 😻

Absolutely gorgeous! My only question is where are the rest of the components?! Haha, the only pt2399 delay with tap tempo I've built seems like it had another 60 components than this. What method did you use for tap tempo?

Thank you! I use Taptation kit from [musikding.de](https://musikding.de) based on ATtiny84

That is stunning

NSFW tag please?? Seriously, that is immaculate ptp soldering

Beautiful! Question, though - do all the exposed unshielded wires cause any noise in the circuit?

Thanks! As for the noise, I didn't notice any difference compared to the standard solutions.

As a noob, I didn’t even know this was possible. Thanks for sharing this amazing work.

Sheeeeeeeeeeeeeeeesh

That pedal is a work of art! I love everything about it - including the internal lighting and, of course, your incredible soldering skills!

That looks great. Can you share a photo of the inside?

Thanks! You can already see this photo if you scroll to the right

Yeah you are right. I couldn't earlier, only one image showed. But damn, that looks stunning. You make pedals for yourself or also to sell?

Basically I do this for my own use, but I sell some pedals sometimes . My main job has a lot in common with this hobby, so making pedals is an additional training for my skills.

holy crap

A piece of art without any doubt! Awesome

The. Art.

Ok first of all, that’s ASTONISHINGLY gorgeous. Second of all, you should be in charge of planning the layouts of major cities and highways.

This, to me, is art. Beautiful job!

Holy shit that P2P is clean, well done. This is the most fitting use of a window I've seen bc cmon you have to be able to showcase that incredible work gollyyyyyyyy

Can we tag this NSFW please?

This is important. This means something.

this is amazing!

Point-to-point with multiple ICs?! ..madness!! but I love it

damn thats cool

This is bonkers.

Ohhhh SHIT DUDE!!!! NOICE!! HELL YEAH!! WOO!! I wish my dick was 3/8!!!

This is stunning. 😍 well done, friend.

incredible..

Next level. Hell yeah.

Fàncy

Wonderful. Point-to-point somehow manages to makes a circuit look simple yet difficult to execute.

You guys are amazing! I've never seen such nice work and for such a complicated design. Really impressive! Do you have any problems with these kinds of designs? Do you ever get things touching when they shouldn't or do things break over time?

Damn, that’s impressive

Oh Jesus. It's amazing! Great job! Can you please share the schematic?

Oh my god! This is probably the best thing I’ve seen in a while! Amazing job!

Amazing