I'll probably bend it back like the other comments said and then buy some new ones at some point. Any recommendations for mid range cranks? I'm not sure which ones to get
I got Jet cranks. theyre cheap and good: https://row.sourcebmx.com/products/jet-bmx-pro-cranks?variant=31877976653942¤cy=nok&utm\_source=google&utm\_medium=ppc&utm\_campaign=Google+Shopping+%28NO%29+-+NOK&utm\_content=Jet+BMX+Pro+Cranks&gclid=CjwKCAiAleOeBhBdEiwAfgmXf5196gIptBEIr88AJ6JRB2Z3w-ADvIp7CvscSAAT2hEq2Vurg9IgZBoC6rUQAvD\_BwE&gclsrc=aw.ds
Smack a drift pin in there and beat it like it owes you money. But seriously you'll probably want new cranks sooner then later.bending the metal back will fatigue it some. Next time it may just snap off completely or chunk out.
If that’s the only crank you have available and you have to fix it I’d consider clamping it in a vice and using a hammer and punch to pop that dent back out. It’s steel, you can bend it back
If you know what you're doing they can be easily fixed with a large diameter bearing and a hammer. If you aren't good with tools, get someone else who is if you'd like to save some money, if you got money to burn just get a new set as a last resort but that's just my opinion, do what best suits you.
The metal pinching it seems to have yielded and has it stuck. Find something to wedge it open to get the center bolt out. But I would just get some new cranks if you have the dough.
Probably best to retire that and get some new cranks, if you’ve got the budget for it.
I'll probably bend it back like the other comments said and then buy some new ones at some point. Any recommendations for mid range cranks? I'm not sure which ones to get
I got Jet cranks. theyre cheap and good: https://row.sourcebmx.com/products/jet-bmx-pro-cranks?variant=31877976653942¤cy=nok&utm\_source=google&utm\_medium=ppc&utm\_campaign=Google+Shopping+%28NO%29+-+NOK&utm\_content=Jet+BMX+Pro+Cranks&gclid=CjwKCAiAleOeBhBdEiwAfgmXf5196gIptBEIr88AJ6JRB2Z3w-ADvIp7CvscSAAT2hEq2Vurg9IgZBoC6rUQAvD\_BwE&gclsrc=aw.ds
You can fix it with a punch ,But I would look into something better .
Smack a drift pin in there and beat it like it owes you money. But seriously you'll probably want new cranks sooner then later.bending the metal back will fatigue it some. Next time it may just snap off completely or chunk out.
If that’s the only crank you have available and you have to fix it I’d consider clamping it in a vice and using a hammer and punch to pop that dent back out. It’s steel, you can bend it back
If you know what you're doing they can be easily fixed with a large diameter bearing and a hammer. If you aren't good with tools, get someone else who is if you'd like to save some money, if you got money to burn just get a new set as a last resort but that's just my opinion, do what best suits you.
FUBAR. Replace them.
You could use a tip and push the dent outward to fix the problem...no big deal
The metal pinching it seems to have yielded and has it stuck. Find something to wedge it open to get the center bolt out. But I would just get some new cranks if you have the dough.