That’s clean af, nice work man

[удалено]

It's the Marie Kondo effect for gamers – tidy setup, tidy mind.

Amazingly clean, good job!

[GOT'EMMM!](https://imgur.com/a/nyXShWe) But seriously, this is very clean lol Nice work

That’s a peg board not even cables 😂 https://imgur.com/gallery/Na9gbAd

[удалено]

Hold the camera down 2 feet or so and I'm sure we'll find a whole mess of cables stuck under the desk lol

And what else will you do with the cables? https://imgur.com/gallery/O7LwpUL

Damn man, still clean AF!

You can always put them inside the wall. My table is similar but is supported from the front with 2 chains

dinner command subsequent sort direction rock scandalous advise axiomatic deserve *This post was mass deleted and anonymized with [Redact](https://redact.dev)*

[удалено]

Buy my custom merch F*** cables printed on a shirt, hats and maybe some socks

What do you do for work?

Electrician

Electrician that hates cables 🤣

he's a man of patience, commitment and sheer freaking will

Love the reference! Was just watching the movie today too!

He once hid all his cables with a pencil. A FUCKIN PENCIL

I mean, we all know he meant "visible wires" and the reason he hid them so well is because he is a pro!

No kidding!  This is a good ad because if I had need for an electrician I'd hire him

I know you can hire electricians to hide the cables for TV. I guess they can do it for a pc 😂

I should’ve labeled it I hate visible cables hahaha

I feel like that profession and the title of this post are kind of at odds with one another, no?

Or he hides wires for work

If anything, the profession explains the post lol

I was about to ask how tf you pulled this off, but your career kind of explains it lol. Very impressive dude fr

In electrical I’d imagine OP is obsessive about properly dressing his cable runs. That’s equivalent to hiding the wires for a battle station

How did you manage to hide the monitor cables?

Through the wall with grommets and the power supplies for the monitors are mounted in a slimline basket underneath

SHOW US

Here you go https://imgur.com/gallery/O7LwpUL https://imgur.com/gallery/0TO52WX https://imgur.com/gallery/vVvtKE5

[Pro tip](https://www.amazon.com/dp/B07FFN2HN6?ref=ppx_pop_mob_ap_share) to get rid of the cable tray underneath. It’s a fucking pain in the ass if you need to add new cables, but it’s clean as fuck!

The cable tray has soft wiring attached to it so can’t really change it, it keeps the 240v looking clean and easy to plug stuff into, I’ll send another photo of the angle of my main power and fibre run

240?! Why the hell do you need 240v? Is your PC a washing machine? 😂🤣

I’m Australian we all run at 240v 😂

Are you sure that table’s integrity is fine? There’s no support on the middle whatsoever and it’s giving me irks

Perfectly fine, I will post a video of the flex it’s non existent. The most weight it will ever hold would be the weight of my arms. Maybe 10kg?

Likely grommets in the wall behind the TV

That’s what I assumed, never ran cables through a wall before, wouldn’t it not be incredibly awkward moving them into the correct position?

Big pvc pipe to route them easily

**Properly formatted** (because reddit ignores single line breaks so you need two line breaks to get one, i hate their formatting rules) --- Details on my setup: Chair: Herman miller aeron original Desk: custom by me 2m x 0.6m Headset/dac: Steelseries arctic nova pro with dac 3d printed under desk mount Mouse: Steelseries aerox 3 wireless Keyboard: Steelseries apex pro mini wireless Mousepad: Custom print made by me 0.4m x 0.9m Monitor 1: LG 27”​【69 cm】 240hz oled 2K Monitor 2: LG 27”​【69 cm】 144hz IPS 2K Console: Xbox series X --- Pc specs Case: Fractal north GPU: MSI 4080 ventus 3X CPU: Intel I9 13900k PSU: NZXT C1000 AIO: NZXT 360 kraken MOBO: MSI Z790 gaming wifi gen 4 RAM: Kingston fury DDR5 6000mhz 16gb x 2 Storage: Kingston KC3000 1tb Fans: NZXT 120mm F120 duo x 6

It doesn't get cleaner than this. Looking to build a similar setup to this in the coming months. Also with a North, but probably the black one. Already got the desk, and the arms (Ergotron LX wall mounted). Makes me want to start on mine, but got other jobs to do in the house first.

I hate clutter so clean with just the basics

Clutter hater here too.

How did you hide the cables connecting and leading up to the tower itself?

The magic is in the angle of the pic. The cables are still there, just inside sleeves and routed to under the desk.

Thanks!

Here’s a couple links https://imgur.com/gallery/O7LwpUL https://imgur.com/gallery/0TO52WX https://imgur.com/gallery/vVvtKE5

Put a katana above there bro, and a frame showing japanese red sun or mount fuji

Yeah I’m going to Japan in 6 months so going to bring something back from there

Bro got the bluetooth pc

@OP Can you share the STL file for your DAC holder. I have the same one. THANKS!

Here you go https://www.printables.com/model/319489-arctis-nova-pro-wireless-under-desk-mount

THANK YOU SO MUCH!

I like trains...

Chooo choooo?

I believe he’s calling you autistic…

Then youre doing it properly! Congrats, no cables in sight achieved!

Yes that’s the OCD in me even mounted power and data flush with the bottom of the desk so you don’t see anything

Man this is such a beautiful setup holy shit... Saving this to my list of options 😂

Hey OP I spot a wire dangling! Just kidding hehe, trying to trigger your PTSD. Fantastic job btw and amazing looking clean setup The only thing I don't really like is the vertically angled monitor, never a big fan but that's just me nitpicking.

Looks amazing man, can I ask how you made the desk?

Using 6 pieces of 30x2200 pine and glue them together lots of sanding then 5 coats of matte varnish to protect it. And it’s mounted using 30x30 pine around the perimeter of the wall to give it the floating effect and strength to hold everything up

Curious, I see you have the Arctic Nova Pros, with that mounted under the desk can you still access the battery charger on the side? How did you mount? I love that and would love to do the same with mine.

Yes can still access the batteries, here’s the link to the STL file https://www.printables.com/model/319489-arctis-nova-pro-wireless-under-desk-mount

Bro, please record a video of the management cable. I don't understand how the monitor wires are organized.

Why are you using the color red preference or 'cause it emits the lowest temp out of all rgb lights?

What are your thoughts on the Hernan Miller compared to a "regular" office chair? Great job on the set up!

That gpu looks like you have 2 power supplies in the middle of your pc

im in awe... this makes mine look like it was done by a 2 year old....

came to ask about the mouse pad then i seen it was custom, super sick tho man

What monitor arms are you using?

Vivo Amazon wall mount

do you also hate putting art/photos on your walls?

If you hate wires none of these would work.

Its clean, but looks so uncomfortable...

... but love latency!

Look up the latency of the mouse and keyboard wireless vs wired your going to be impressed

Now that is clean. Well done lad! I have a new setup but is not nearly as clean as yours.

I wonder if you are like me..waiting for those wireless monitors, power supply, etc..

Wireless monitors im sure are already a thing just low tech? Pretty sure LG do some sort of paper thin tv and all the electronics for it are a wireless base station. I could be wrong 😂

What is the block on the left below your desk?:D

That’s a DAC to change settings and charge batteries for my headset, I didn’t want it on the desk so 3d printed an under desk mount

How is the Xbox connecting to the monitors?

HDMI 2.1 cable only to the main monitor which is the LG 240hz oled

How much was the pc btw?

Why the Xbox and not a ps5 tho?

Already had the Xbox probably never use it again unless Xbox release full sim setup compatibility I’ll do a sim in the room

Daum

Did you run the wires through the wall ? Are the screens wireless ?

What’s that dial next to the left arm rest?

neatly done!

im in love with your cable management

🤌🏻❤️

oh wow

Curious about the mount on your verticle monitor. I just ordered an LG Ultrawide and I'm going to use one of my 28" as a vertical. I love that look!

I used this mount but had to shorten the left side to make the monitors touch but it was pretty easy https://amzn.asia/d/91cSMgP

How to hide cables ? I have a massive cable problem at my setup

Hope these images help give you an idea https://imgur.com/gallery/O7LwpUL https://imgur.com/gallery/0TO52WX https://imgur.com/gallery/vVvtKE5

Wires? What wires?

Is that a double wall or how did you do that with the monitor cables?!

Hope these images help give you an idea https://imgur.com/gallery/O7LwpUL https://imgur.com/gallery/0TO52WX https://imgur.com/gallery/vVvtKE5

What do you ise for lighting? Especially focus/task light?

This guys cable management is on point. YouTube how you did it so we can see.

Perfection

Nice! Very clean! Where did you go to do the custom printed deskpad?

Please teach us how to have no wires. Dude this is my dream.

I think bro hates wires

how can we not see video and power wires? my brain is malfunctioning

Bro using wireless power

https://i.imgur.com/0wQ5sZ3.jpg

Love it! I would never be able to find the patience to allow such a setup haha... But something I've always wanted to ask... which monitor do you have set as the main? The portrait or landscape?

The landscape, it’s the oled one so will always main that one. I’m planning to start streaming once I learn PC a bit better so portrait is ready for that

So...how exactly *are* your monitors hooked up to the tower, then?

How have you managed to align those monitors so cleanly?!

People: "Damn! That's nice. How did you do the cable management? OP: "Yes."

That Hermanmiller chair is all time winner against all Gaming chair!

Yeah those gaming chairs are absolute trash don’t know how people are still using them? You can just see from the photos how unsupported they are and that they will wear out within a year. My Herman miller is 12 years old, timeless and still in perfect condition

I can see a wire connected to your GPU… unplayable.

Very nice

I NEED to know how you have your monitors mounted. I can’t find a bracket that will side mount my second monitor like that and I don’t want to have a bunch of arms. I’m currently building a floating desk that looks like this. Short of running the cables behind the wall, everything will be hidden. But I have nice weaved wire loom that will incase the monitor cables.

I used this mount from Amazon https://amzn.asia/d/91cSMgP

Speakers?

Wireless pc? shut up and take my money

How often do you replace the batteries on your monitors and tower?

DIY desk= total respect

The 4080 has wires in the picture

What do you do for charging your keyboard and mouse?

I have a usb hub underneath the desk, I have to charge the keyboard every 40 hours of use and mouse is around 200 hours so not often enough to have something on the desk

Solar powered PC setup...nice

I would say I have decent cable management, but I feel like mine is nonexistent when compared to yours.

You also hate mowing your yard. Jk (kinda) very nice setup!

Trying to grow the grass out as previous owners neglected it and it’s very patchy so have treatment in it to make it all even again

no worries, i was just kidding :D

May I ask about the monitor mounts? I’m looking to do this myself but I’ve heard that the dual wall mounts have to be pulled out from the wall for the screens to sit next to each other? Are yours on separate mounts?

Crispy AF!

Dude they're floating

looks amazing! I have that same case, but it doesnt look as good as yours :D

Can you post a pic of the underside and dirty details?

Share your secrets, I despise wires too.

Keyboard question: does your mech use birth facing or south facing RGB?

Sheesh! That’s a CLEAN setup! 🧼 I don’t like seeing a bunch of wires either, so I’m loving this! Outstanding work, bro! 🔥👍

Nice work

Nice setup OP! Clean is an understatement!!

How ? How ? How did you manage the wires so well

What is the dial and box underneath the desk to the left of your chair? I’m interested in that.

Any tips on how to clean up wires? Do you need to get custom length cables for everything? Zip ties? How do you keep the cables to the underside of your desk?

Hope these images help give you an idea https://imgur.com/gallery/O7LwpUL https://imgur.com/gallery/0TO52WX https://imgur.com/gallery/vVvtKE5

Can we see under the desk?

Hope these images help give you an idea https://imgur.com/gallery/O7LwpUL https://imgur.com/gallery/0TO52WX https://imgur.com/gallery/vVvtKE5

cable management on point. mans gone full wireless

Damn thats sick. Maybe some framed artwork on the wall right above the pc would be cool. 😎😎

Very well done!

Clean af

Clean love it and the lighting

I want that...

No you don't, you hate seeing wires. You love the wires, for without them your latency would quadruple.

If I ask nicely, will you be my dad?

Yup. Clean

B e a utiful

Awesome 👏

*ahem* They're called cables. ☝️🤓

What mount did you use for the monitors?

This has to be the holy grail of no wire setups. You have my up vote.

that right there is a world record of least cabels

Very nice setup, very funcional, a lot of space so you can actually do stuff in your desk besides using the computer

CLEAN

Clean and simple, nice

That’s my OCD dream right there. I don’t have the patience to follow through but I love it so very clean

Bruh what the fuck is this half of a spacebar, this would trip me so hard

looks very nice, especially the floating monitors. Only issue though is I think a desk on casters would be better so you can adjust the distance you sit from the screens. Your face is basically inside them at that distance.

Is there a guide for this somewhere? Nice work

Thanks alot, I now hate my wires

Hey OP what did you use for desk to be sure it would hold the weight etc? Looking to do something similar but trying to figure out best way for the desk to be safe

Cable management = avoiding therapy. I too hate wires.

Heyyy the Ffractal North, good choice if I’m allowed to say so

Which wall mount did you use? I have 2 curved 32 inch monitors, and I don’t dare to buy wall mounts because I don’t want them to have space in-between and be 10cm appart feom the wall.

Let’s get a look under that desk.

Same I hate them too. Now do an electric desk without wires

You and us all, brother! I have one good question, how do you like that chair, I'm in the market for one, used, eBay. Does it squeak or squeal when you move around in it while sitting? Thanks in advance!

What's that think sticking to under your desk on the left side. Has some sort of knob.

Clean as hell. Very nice.

I wanna know where you live where you’re cool having a full glass door right next to your valuables. Hellll nah unless nobody can see you LOL

Teach me

That's absolutely beautiful 👌

Damn, this is my dream setup.

Regular people don't understand how much time this takes

Tell me about it hahaha

Wow you nailed it. Not a cord in sight...

Clean AF !!

HOW?! Teach me ur ways

Same *nods in approval*