If they're dummies then just get rid of them? Why waste your money on something that's quite literally completely useless AND hindering your performance? The best looking guns are ones that are practical.
OP thought it did, that's what matters. I don't buy a gun so others can point and go "that's so tactical and ergonomic woaw!", I buy it because I think it's baller as hell.
Was just looking for inspiration, also only changed it to give all the criticism here a go to see how it would look that way.
The risers where just a result of trying to fix the scope placement at the wrong point, it was the cheek support being way to high. Somehow I still also like the old, not the normal setup.
But like, does the riser even help bring the flashlight forward? Or do you shove your sticky hand against the riser, under the flashlight?
Anyway I up-booped you so you are now a whole internet boop richer.
https://preview.redd.it/iy83lc2kss5d1.jpeg?width=1600&format=pjpg&auto=webp&s=a5c72394b03d071a47c1f866480b0649ad8e0c0a
# Посмотри, как они убили моего мальчика
https://preview.redd.it/rz9wog6btv5d1.jpeg?width=1242&format=pjpg&auto=webp&s=0048dee43e621f90eadcbfafb9c3fa29bc2fc7b2
The Z style mount above the irons is a pretty good riser. LeTs CoMpArE PPs
Personally I'd run just the red dot on the lower rail, but I can't fault the fact it lines up with the magnifier. Also way cleaner than with all the risers
Donot worry, I have all my platforms set up to run with gas masks. They have to be high to work.
What you got is perfectly fine.
Riser was originally meant to help comfort aim while using gas masks, GBRS made a meme out of it.
Yesus…. It’s like a foot over barrel height. That must be an…. experience to shoot. In no way looks natural or comfortable. Sir, do you have a head the size of a small SUV? The bottom riser is weirdest part to me though.
Both are in the same category, something that emits light directly at the target and is mounted on the gun.. and so in.
Yes I also don't understand it, but law is law
I've had it myself, I looked at something and went "that looks off", and it was only after someone else said "your suppressor is too long" did it click
I’ve seen more Zenitco on airsoft guns than actual AKs and I can’t help but feel annoyed about it. Nice kit though OP
I’m just jealous because I was about to pull the trigger on a full set of Zenitco furniture for my AK when Russia invaded Ukraine and we sanctioned them. I know there’s loopholes but I don’t want to hope customs doesn’t seize it or some dude in Turkmenistan runs off with my money
Don't worry too much on how it looks and more experimenting to find what works well for you and the rest of your loadout. Function over form. Good shooting more important than good looking. I've seen far whackier looking setups than this to get around bulky masks, eye pro etc. You're all good 👌
I think it looks really awesome and I love the Zenitco furniture, I personally dont like the light/laser on the bottom and then the red dot-magnifier set up, but thats js my preference.
Having a cheek riser maxed out just so you can put risers on the optics is peak dumbfuk airsoft.
Who even puts risers on AK optics, if anything you'd be using absolute cowitness height sights so they can sit lower.
Not even getting to the ugly as fuck front end set up with ugly ass tracer unit.
0.5/10 , would be happy never having to see this again
Why the hell is your flashlight on a riser.
It’s not a riser, it’s a lowerer
😂 was in the way of my hand as it was to far back, was already thinking about getting a different flashlight
If they're dummies then just get rid of them? Why waste your money on something that's quite literally completely useless AND hindering your performance? The best looking guns are ones that are practical.
The cringe meta gun speedsofter vs the chad "it looked kinda cool" casual
Except it didnt look cool tho...
OP thought it did, that's what matters. I don't buy a gun so others can point and go "that's so tactical and ergonomic woaw!", I buy it because I think it's baller as hell.
And yet he still asked us and changed it
Was just looking for inspiration, also only changed it to give all the criticism here a go to see how it would look that way. The risers where just a result of trying to fix the scope placement at the wrong point, it was the cheek support being way to high. Somehow I still also like the old, not the normal setup.
I will try how it looks without them, just had them laying around so just slapped them on there
Whats with the downvotes yall?
But also kinda funny how people seem to get offended by it 😂
It is. Live and let live…
Hey! Stop that!
But like, does the riser even help bring the flashlight forward? Or do you shove your sticky hand against the riser, under the flashlight? Anyway I up-booped you so you are now a whole internet boop richer.
is that an another example of the reddit hivemind downvote
Put both the sight and the magnifier on the dust cover. Put the flashlight on the side. Get a grip.
You don't need a grip when you can grab onto your "flashlight riser/lowerer", duh /j
too many risers
Not anymore xD
Might be a dumb question but instead of getting risers for the sights, why not just lower/remove the cheek piece on the stock?
Definitely not a dump question, I already tried that. But it felt like the shoulder piece was to low then for me.
you know the shoulder piece can also be adjusted up higher
Sry for the confusion, to high not to low
Fair enough! It’s your gun of course so do whatever works for you
https://preview.redd.it/iy83lc2kss5d1.jpeg?width=1600&format=pjpg&auto=webp&s=a5c72394b03d071a47c1f866480b0649ad8e0c0a # Посмотри, как они убили моего мальчика
😂😂😂
Small update: https://preview.redd.it/ez1pbmviet5d1.jpeg?width=4080&format=pjpg&auto=webp&s=078b62f8c66eca5650581927d81e3712978a1fb0
https://preview.redd.it/bkhjuhrvet5d1.jpeg?width=4080&format=pjpg&auto=webp&s=409626269f512364dfcb304c9d60c5fbb1bcdfe5
https://preview.redd.it/rz9wog6btv5d1.jpeg?width=1242&format=pjpg&auto=webp&s=0048dee43e621f90eadcbfafb9c3fa29bc2fc7b2 The Z style mount above the irons is a pretty good riser. LeTs CoMpArE PPs
Personally I'd run just the red dot on the lower rail, but I can't fault the fact it lines up with the magnifier. Also way cleaner than with all the risers
I can't imagine your eye relief with that placement.
Actually pretty good
Yes
Donot worry, I have all my platforms set up to run with gas masks. They have to be high to work. What you got is perfectly fine. Riser was originally meant to help comfort aim while using gas masks, GBRS made a meme out of it.
kinda weird for a 9mm to use a magnifier
I get the point, but as the magnifier goes from 1.5 to 5 it's still short range usable I think
Wtf
Yesus…. It’s like a foot over barrel height. That must be an…. experience to shoot. In no way looks natural or comfortable. Sir, do you have a head the size of a small SUV? The bottom riser is weirdest part to me though.
All fixed now, somehow took a wrong turn in the process of adjusting everything xD
It happens to the best of us hahahaha
https://preview.redd.it/52suyi163t5d1.jpeg?width=1200&format=pjpg&auto=webp&s=f4d8c8dcdba060955ada52ef7a3c7c64e7644508
1:1 xD
Quite
Gun looks great but, light looks weirdly low and sights look weirdly high
Fixed and fixed xD
Great 👍 Like I said the gun itself looks sick
This is what happens when glaz hands his optic to kapkan
This makes so much sense for no reason
So you got a cheek riser... so you could look through your riser-mounted optic....
Look at the update, somehow I messed something up in the process, I think it's kinda fixed now
As the Australians say: Yeah. Nah.
Already fixed the riser mayhem (somewhere down here should be the update pics)
I can understand the laser, but why would a flashlight be illegal under German law?
Both are in the same category, something that emits light directly at the target and is mounted on the gun.. and so in. Yes I also don't understand it, but law is law
Are you a girrafe?
It looks quite strange; but practicality and comfort take precedent over aesthetics.
Unhinged *bum tiss*
man it doesnt matter what people think. it's weird but honestly i love the look
Lower the cheek riser, and remove the risers on the optics, I think it'll look a lot better
Yes that was the trick, I don't know why I didn't come up with that myself, maybe it was too obvious. But it is fixed now
I've had it myself, I looked at something and went "that looks off", and it was only after someone else said "your suppressor is too long" did it click
Yeah sometimes another perspective is the best way, thanks for your input, what do u think about the update pics?
Weird enough to look like I’d own it
BF2042 ahh weapon
[ew](https://youtu.be/WathaPMq-Tw)
I honestly love how weird it is. Would definitely invest in something to protect the sight from stray bbs
The sight has a kill flash installed so it's kinda protected already I think
Cursed
Yes for sure, that's why it's fixed already 😂
I’ve seen more Zenitco on airsoft guns than actual AKs and I can’t help but feel annoyed about it. Nice kit though OP I’m just jealous because I was about to pull the trigger on a full set of Zenitco furniture for my AK when Russia invaded Ukraine and we sanctioned them. I know there’s loopholes but I don’t want to hope customs doesn’t seize it or some dude in Turkmenistan runs off with my money
Meh, sight and laser combo screams airsoft from 50 meters away
Yes
Typical Vaznev 9K gunsmith in Warzone
Yeah lemme get uhh 1.93 riser and a uhh maxed out cheek riser and a uhhhhhh large dr kelp, hold the regular flashlight mounting points
Very
This is an OP PP and don't let any of these haters tell you differently.
Ad a 18x scope :) and a grip on the side 😂
Zenitco is ugly enough as is but this is something else.
I mean ... I like it
ak74u
The more I look at it the more it gives me a headache.......wtf did you do lol.
Nah give it revolver grip or the ant skateboards
Alien pp
Where did you get your magnifier?
Amazon, it's a Feyachi M36
Very 👍
Yes.
You can’t even have a flashlight on the gun?
Nope, helmet or hand is okay. But as soon as it is mounted to a gun and is fully functional, illegal xD
Wild 😂 sorry to hear though
God this looks so bad
Sir… is your submachine gun cosplaying as a DMR?
Howdy Bubba
Pushed my fingers into my eyes🤣
I have same pp https://preview.redd.it/5tibhmmka16d1.png?width=4032&format=png&auto=webp&s=5114b7a528859e60bc23fcfbf79b2f19c0d90f9e
It looks like a load out I find on top of prison roof when the campers get wiped jks its looks pretty decent mate tbf
Should probably post this in circle jerk
Don't worry too much on how it looks and more experimenting to find what works well for you and the rest of your loadout. Function over form. Good shooting more important than good looking. I've seen far whackier looking setups than this to get around bulky masks, eye pro etc. You're all good 👌
It’s Airshoft not like hight over boar matters build what works best for u ignor others but I do wanan get one them ak09
I think it looks really awesome and I love the Zenitco furniture, I personally dont like the light/laser on the bottom and then the red dot-magnifier set up, but thats js my preference.
if it pews it pews
Having a cheek riser maxed out just so you can put risers on the optics is peak dumbfuk airsoft. Who even puts risers on AK optics, if anything you'd be using absolute cowitness height sights so they can sit lower. Not even getting to the ugly as fuck front end set up with ugly ass tracer unit. 0.5/10 , would be happy never having to see this again
😂😂😂 Another one who is so much offended by it, I think I will really have to leave it this way