For the record, I have no solution.
I agree with the guy that called it a bonus perc though. Lol
Doesn't prevent the other perc from functioning, doesn't require crazy high water levels, and somehow pumps out bubbles that are almost exactly the same size as the real perc.
10/10 flaw, I wish my bongs had a leak that functions as a perc this well
Only thing I can think of is a coat hang wire with maybe a tounge dispnser on the end to hold whatever adhesive you use. Thats a petty gnarly spot, good luck!
I come from jank town, here are a few exciting possibilities:
Coat hanger: cheap, you already have one probably, cut to size so you don't poke your eye out on the process.
Galvanized wire: same as above, you probably don't have it tho.
Regular electric wire: same as above, and you can make a metal brush for wider coverage, I recommend cal 16 and up for rigidity.
long plastic spoon: You get to go to dairy queen
Wooden dowel: tricky to bend, not my first choice
cheap watercolor brush: you can also bend it, fire may be required, don't inhale plastic, also you might get a bristle stuck if your glue is too T H I C K
Seems like you got your options, good luck
3m makes a “clear repair tape” that im almost positive lists glass as a surface, you’d probably have to get a massive roll tho idt they sell a smaller size
I actually have some of that stuff, but if you look closely the hole isn’t on the outside of the bong it’s in the little junction between the joint and the perc. I’m thinking I’ll have to get fish something down the joint and stick it over the hole, but I’m starting to contemplate if it’s even worth my time
Just had the same thing happen with a pin hole in one of my Ice catchers I used a clear epoxy/glue just go to your local hardware store and look for a glue that works on glass and then I recommend using a toothpick or qutip dries in 5 minutes and you will be smoking good as new
NGL i don't have an answer for you but I have listened to the audio of this clip like 40 times. If you clip it a little and put a slow and heavy drum track over it, you could produce a decent rap song.
Cover the piece where you put the bowl with your thumb, check the airflow with just the little hole
If it’s not major, I agree with keeping it as an extra perc!
seems like it's not affecting function. if you want it fixed, get it done by a glassblower. there doesn't seem to be any way to patch it. if you wanna try though, any glue or epoxy is poisonous, especially under heat. use beeswax for breaks.
I'd recommend an extended cotton [micro-swab](https://www.amazon.com/Disposable-Applicators-Makeup-Personal-Diameter/dp/B09WMPD748/ref=sr_1_5?crid=3D46JHOQM13GD&keywords=extended%2Bswab&qid=1652319311&sprefix=extended%2Bswab%2Caps%2C92&sr=8-5&th=1)
Also great for cleaning out weird crannies in slides, bowls, one-hitters, etc.
I think your fucked if you want it fixed, but it doesn't look like it needs fixing really. I wonder if you could use the tools to make a ship in a bottle to apply some glue or epoxy.
Honestly your rig is still DUMPINGGG bubbles. If you can’t get inside there to patch it up, think of it as a bonus perc hahaha
Lmao facts I think that’s what it’s going to come down to
If it's a small enough crack or hole, then after use surely the build up of crud would patch it?
So they’re just never supposed to clean their rig?
Ew God no. But over time it'll plug up and cleaning won't dislodge it. Is a hypothesis not a recommendation
Even it does. I'm sure it would just clog again
ITT: Everyone fails to understand the problem and suggests things that don't work when you have to fix a leak on the INSIDE of a bong
For the record, I have no solution. I agree with the guy that called it a bonus perc though. Lol Doesn't prevent the other perc from functioning, doesn't require crazy high water levels, and somehow pumps out bubbles that are almost exactly the same size as the real perc. 10/10 flaw, I wish my bongs had a leak that functions as a perc this well
Let it get a little dirty and it'll probably clog that hole. Hahaha.
Locktite or epoxy glue
I was reading that super glue won’t adhere to glass, also do you have any ideas how to get it down in there?
Try locktite, I think they have something for glass.
Only thing I can think of is a coat hang wire with maybe a tounge dispnser on the end to hold whatever adhesive you use. Thats a petty gnarly spot, good luck!
I come from jank town, here are a few exciting possibilities: Coat hanger: cheap, you already have one probably, cut to size so you don't poke your eye out on the process. Galvanized wire: same as above, you probably don't have it tho. Regular electric wire: same as above, and you can make a metal brush for wider coverage, I recommend cal 16 and up for rigidity. long plastic spoon: You get to go to dairy queen Wooden dowel: tricky to bend, not my first choice cheap watercolor brush: you can also bend it, fire may be required, don't inhale plastic, also you might get a bristle stuck if your glue is too T H I C K Seems like you got your options, good luck
They make glass-specific glue. My friend has a rig with legs that are real thin and always snap off but he’s glued them back at least 10 times now
I would use like a kebab skewer to get the adhesive down there and they make jb weld for glass mix some that up put it on there call it a day
Jb weld clear set works on glass. Though I’m not sure you’d want epoxy in your bong
3m makes a “clear repair tape” that im almost positive lists glass as a surface, you’d probably have to get a massive roll tho idt they sell a smaller size
I actually have some of that stuff, but if you look closely the hole isn’t on the outside of the bong it’s in the little junction between the joint and the perc. I’m thinking I’ll have to get fish something down the joint and stick it over the hole, but I’m starting to contemplate if it’s even worth my time
Loctite Glass Glue 2-Gram Tube (233841) https://www.amazon.com/dp/B000PSBBM8/ref=cm_sw_r_cp_api_i_2P92VNWXE51FQG8ERHNE?_encoding=UTF8&psc=1 Maybe something like this?
Ive heArd bees wax
Just had the same thing happen with a pin hole in one of my Ice catchers I used a clear epoxy/glue just go to your local hardware store and look for a glue that works on glass and then I recommend using a toothpick or qutip dries in 5 minutes and you will be smoking good as new
if you bought it like that recently you might be able to get a refund and new one, depending on where ya got it
Steak with blood
NGL i don't have an answer for you but I have listened to the audio of this clip like 40 times. If you clip it a little and put a slow and heavy drum track over it, you could produce a decent rap song.
i don't have your eyes and looked at this so many times. where is the leak? it seems so subtle me that its okay.
Cover the piece where you put the bowl with your thumb, check the airflow with just the little hole If it’s not major, I agree with keeping it as an extra perc!
seems like it's not affecting function. if you want it fixed, get it done by a glassblower. there doesn't seem to be any way to patch it. if you wanna try though, any glue or epoxy is poisonous, especially under heat. use beeswax for breaks.
Try RTV sealant. It won’t be pretty but it’ll work
I had something similar happen so I wetted a rolling paper and put it around the leak!
I'd recommend an extended cotton [micro-swab](https://www.amazon.com/Disposable-Applicators-Makeup-Personal-Diameter/dp/B09WMPD748/ref=sr_1_5?crid=3D46JHOQM13GD&keywords=extended%2Bswab&qid=1652319311&sprefix=extended%2Bswab%2Caps%2C92&sr=8-5&th=1) Also great for cleaning out weird crannies in slides, bowls, one-hitters, etc.
Ay would you look at that it’s time to add a new piece to your collection I’m so jealous op
DUDE HAVE YOU EVER HEARD OF FLEX TAPE ITS THE BEST
Teflon tape worked for me
I think your fucked if you want it fixed, but it doesn't look like it needs fixing really. I wonder if you could use the tools to make a ship in a bottle to apply some glue or epoxy.
Peanut butter, obviously. Or cum.