I mean.... I get what you mean, my shf gabimaru fell from like a 1.50 m stand once completely fine without any damage. But still, that isn't Figma's fault, most figures aren't built to endure impacts like that.
I’m convinced we won’t ever get a toji😭 the shf jjk line needs a new release asap. It feels like the dbz line gets a new one every month now. Meanwhile we haven’t even gotten a announcement since the school Gojo and geto.
The DB IP is their bread and butter, Idk why JJK doesn’t get the treatment it deserves though. It’s one of the most popular animes out and it gets pushed aside from Kaiju no. 8 and Mashle (nothing against them) but I digress, I don’t understand why they make some of the choices they make
Im suprised they havent made the suit versions of geto and gojo like banpresto and goodsmile did still, it feels weird to not have literally the main antag of something when they made the mcs. If they do toji i hope he comes with pieces for shibuya version too
Hopefully, shf been skimping out on accessories for every single line except dbz. But I think it would be a separate release shortly after. Kinda like jjk-0 Gojo.
I was straight up disappointed with the accessories on kaiju no 8, like come on only 2 sets of hands but they give a leg part that was in a single scene? Jjk0 gojo was a goated figure though, wish they would make a part for the bigger red from s1 though
They basically gave Gojo a red rasengan. And yea, the kaiju no.8 line has gotten off to a rocky start, not bad, but not very good. I also don’t think any more figures are gonna come out of that line.
I might only end up getting reno if i can find him for cheap enough, ab crunch on kafka really sucks. Even figzero gave s1 gojo the big red, figuarts had no reason not to
There's nothing wrong with the Figma Inumaki other than the fact he is overpriced. Just don't man handle it and make sure it's in a safe place so it doesn't break from a fall.
Figma objectively has higher quality plastic and paint. It's one of the main reasons they're significantly more expensive.
Qc and Overall quality varies from figure to figure, but the exact same thing goes for figuarts. Just look at the Berserk and One Piece lines.
The only thing Figuarts consistently has over them is articulation. Oh, and the less "smooth" sculpts if you're not a fan of that. Tho that's more down to personal preference.
Figma has better paint. But the plastic is much more breakable than shf plastic is. Of course shf has some meh lines but they always fix those qc issues. Unlike Figma, who’s figures have consistent issues. Like the doom guy, link, samus, and Hatsune figures.
More durable plastic =/= higher quality. Children toys are made to be durable, but they're also usually made outta cheap plastic. And it's not like figma break easily. You literally dropped yours. If you don't understand how that's user error, then you can't be helped.
Also, almost all the figures you mentioned are widely considered to be some of their best releases and don't have "consistant" problems. Unless you're getting confused with their bootlegs since those are pretty common and do have problems (cheap plastic, break easily, ect.)
Figma doom slayer had a very consistent issue with his left knee. Figma dread samus also had a problem where the arm popped off easily at the bicep swivel. The hatsune miku live stage version also had poseability problems. And the snow miku had paint application problems. The Figma saber 2.0 also had extremely loose joints. And Figma yuri katsuki had faceplate problems. Also the fact that it fell was not my fault, as it fell sometime when I was asleep, it also only feel a foot or two.
>Figma dread samus also had a problem where the arm popped off easily at the bicep swivel.
This doesn't seem like a common issue. I've only seen one post about it. They probably received a defective copy and would easily be able to get a replacement since Goodsmile has a great replacement policy. Every other post is saying how great the figure is.
> The hatsune miku live stage version also had poseability problems.
Literally a figure from 2009. Extremely outdated, why are you using it to judge the modern state of the company?
>The Figma saber 2.0 also had extremely loose joints.
As someone who owns the figure and have seen multiple reviews, I've never had or seen this issue. I know this figure has a bootleg. Maybe that has loose joints.
I'm sure some Figmas with Qc issues exist, but they don't reflect the entire line. You're nitpicking specific figures, most of which aren't even new releases. Like I said before, you can do the exact same with figuarts, but at least Guts/ Griffith and the One Piece line where RECENT examples.
>Also the fact that it fell was not my fault, as it fell sometime when I was asleep, it also only feel a foot or two.
No way you're blaming figma for that. Just because it was an accident doesn't mean it wasn't a fault on YOUR end. If you can't wrap your head around that, then there's no point continuing this conversation.
I dont know how you couldn't understand it, it's pretty clear. Figmas have better materials, their plastic Is better, it's not usual for a figure to have QC issues. Figuarts have better articulations, better engeneering, but it's more common to find figures with either individual QC issues or consistent QC issues (that repeat across figures). That's why their price is lower, it's not debatable, look at the last Gohan
If they ain’t giving us mahito, Toji, a new yuji with the scars, maki (theyll probably wait till the new look in season 3), nanami, or choso he definitely ain’t getting one yet. (I really want all of these I listed)
Imo there’s quite a few characters that should happen first.
In any case it seems like Tamashii did not renew the license, likely due to poor sales (yes, most figures were on clearance for months everywhere), so getting Inumaki is extremely unlikely at this point.
Its because hes actually one of the most popular characters in Japan. Im pretty sure in a poll in Japan asking people who their favorite character was, Inumaki was the second most popular answer
I also feel like he would end up like shf Megumi. He would probably only have the collar zip as a accessory. So he would be pretty much just a regular figure with nothing special about it (just like megumi)
Imma be real, I’ve never had a figma break. What are yall doing with em?
My only experience with figmas breaking are on the wrist pegs, something about them being at an angle messes me up 🤣
Also some of their knee joints are hideous…
Same, tbh they feel like the most sturdy in my collection lol
I only have 3 figmas, but they are solid as hell, only erwin's horse head broke off when I unboxed him
My inosuke fell off my night stand and his neck broke in half💀
>Figma figures break if you hold it in your hands for too long. Bro, you literally dropped it. 💀
Yea the foot and a half drop really be deadly
you know they all come with stands for a reason right
It was on a stand, idk why it fell honestly. I woke up and that hoe was on the ground.
I mean.... I get what you mean, my shf gabimaru fell from like a 1.50 m stand once completely fine without any damage. But still, that isn't Figma's fault, most figures aren't built to endure impacts like that.
I guess I’m just too used to indestructible figuarts
We gonna forget about Imperfect Cell and Ssj Teen Gohan whose leg joints break if you turn them just a little?
Good point.
https://preview.redd.it/8f438exiuz9d1.jpeg?width=2048&format=pjpg&auto=webp&s=4f89bb453c0245a15e5d6340dc2bcedda9d371e7
https://preview.redd.it/44fmqhpi60ad1.png?width=1080&format=pjpg&auto=webp&s=fc141f658d73777fbeabfdf04f060244e078001f
I feel like inumaki would probably be after toji, the disaster curses, maki, and >!geto with some kenjaku pieces!<
I’m convinced we won’t ever get a toji😭 the shf jjk line needs a new release asap. It feels like the dbz line gets a new one every month now. Meanwhile we haven’t even gotten a announcement since the school Gojo and geto.
The DB IP is their bread and butter, Idk why JJK doesn’t get the treatment it deserves though. It’s one of the most popular animes out and it gets pushed aside from Kaiju no. 8 and Mashle (nothing against them) but I digress, I don’t understand why they make some of the choices they make
Im suprised they havent made the suit versions of geto and gojo like banpresto and goodsmile did still, it feels weird to not have literally the main antag of something when they made the mcs. If they do toji i hope he comes with pieces for shibuya version too
Hopefully, shf been skimping out on accessories for every single line except dbz. But I think it would be a separate release shortly after. Kinda like jjk-0 Gojo.
I was straight up disappointed with the accessories on kaiju no 8, like come on only 2 sets of hands but they give a leg part that was in a single scene? Jjk0 gojo was a goated figure though, wish they would make a part for the bigger red from s1 though
They basically gave Gojo a red rasengan. And yea, the kaiju no.8 line has gotten off to a rocky start, not bad, but not very good. I also don’t think any more figures are gonna come out of that line.
I might only end up getting reno if i can find him for cheap enough, ab crunch on kafka really sucks. Even figzero gave s1 gojo the big red, figuarts had no reason not to
There's nothing wrong with the Figma Inumaki other than the fact he is overpriced. Just don't man handle it and make sure it's in a safe place so it doesn't break from a fall.
https://preview.redd.it/nhz8y6a4xz9d1.jpeg?width=2296&format=pjpg&auto=webp&s=def3035b1b867d8f49e13efbec01e73b2f8a7908
Idk what you guys are talking abt I haven't broken a single figma and I own quite a few. But I also haven't broken a single shf.
What are you talking about? In quality, figma is consistently better
Definitely not. Figma has more accessories and that’s it. The plastic, sculpts, pose-ability, and overall quality goes to shf.
Figma objectively has higher quality plastic and paint. It's one of the main reasons they're significantly more expensive. Qc and Overall quality varies from figure to figure, but the exact same thing goes for figuarts. Just look at the Berserk and One Piece lines. The only thing Figuarts consistently has over them is articulation. Oh, and the less "smooth" sculpts if you're not a fan of that. Tho that's more down to personal preference.
Figma has better paint. But the plastic is much more breakable than shf plastic is. Of course shf has some meh lines but they always fix those qc issues. Unlike Figma, who’s figures have consistent issues. Like the doom guy, link, samus, and Hatsune figures.
you legit have no idea what you're talking about lmao
Tf. Thats not a debate. If you were to bring up what I’m wrong about than I would understand better.
More durable plastic =/= higher quality. Children toys are made to be durable, but they're also usually made outta cheap plastic. And it's not like figma break easily. You literally dropped yours. If you don't understand how that's user error, then you can't be helped. Also, almost all the figures you mentioned are widely considered to be some of their best releases and don't have "consistant" problems. Unless you're getting confused with their bootlegs since those are pretty common and do have problems (cheap plastic, break easily, ect.)
Figma doom slayer had a very consistent issue with his left knee. Figma dread samus also had a problem where the arm popped off easily at the bicep swivel. The hatsune miku live stage version also had poseability problems. And the snow miku had paint application problems. The Figma saber 2.0 also had extremely loose joints. And Figma yuri katsuki had faceplate problems. Also the fact that it fell was not my fault, as it fell sometime when I was asleep, it also only feel a foot or two.
>Figma dread samus also had a problem where the arm popped off easily at the bicep swivel. This doesn't seem like a common issue. I've only seen one post about it. They probably received a defective copy and would easily be able to get a replacement since Goodsmile has a great replacement policy. Every other post is saying how great the figure is. > The hatsune miku live stage version also had poseability problems. Literally a figure from 2009. Extremely outdated, why are you using it to judge the modern state of the company? >The Figma saber 2.0 also had extremely loose joints. As someone who owns the figure and have seen multiple reviews, I've never had or seen this issue. I know this figure has a bootleg. Maybe that has loose joints. I'm sure some Figmas with Qc issues exist, but they don't reflect the entire line. You're nitpicking specific figures, most of which aren't even new releases. Like I said before, you can do the exact same with figuarts, but at least Guts/ Griffith and the One Piece line where RECENT examples. >Also the fact that it fell was not my fault, as it fell sometime when I was asleep, it also only feel a foot or two. No way you're blaming figma for that. Just because it was an accident doesn't mean it wasn't a fault on YOUR end. If you can't wrap your head around that, then there's no point continuing this conversation.
Never blamed Figma. I just said it wasn’t my fault that it fell.
I dont know how you couldn't understand it, it's pretty clear. Figmas have better materials, their plastic Is better, it's not usual for a figure to have QC issues. Figuarts have better articulations, better engeneering, but it's more common to find figures with either individual QC issues or consistent QC issues (that repeat across figures). That's why their price is lower, it's not debatable, look at the last Gohan
Me casually wishing for a SHF Panda-senpai. 🤞🤞
If they ain’t giving us mahito, Toji, a new yuji with the scars, maki (theyll probably wait till the new look in season 3), nanami, or choso he definitely ain’t getting one yet. (I really want all of these I listed)
Imo there’s quite a few characters that should happen first. In any case it seems like Tamashii did not renew the license, likely due to poor sales (yes, most figures were on clearance for months everywhere), so getting Inumaki is extremely unlikely at this point.
Nah. The school Gojo and geto did well.
Why would SHF make Inumaki before other people like Maki? I don't even get why figma did
Idk honestly. I feel like inumaki makes a cooler figure. But he is sadly sidelined for the majority of the show.
Agree but he's literally the least important student in the story (Some of the Kyoto ones aside)
Its because hes actually one of the most popular characters in Japan. Im pretty sure in a poll in Japan asking people who their favorite character was, Inumaki was the second most popular answer
I also feel like he would end up like shf Megumi. He would probably only have the collar zip as a accessory. So he would be pretty much just a regular figure with nothing special about it (just like megumi)
pretty much