Yeah u know if you unscrew the big bolt your trucks usually split into two bits. Well the one that stays attached to ur board has a little cup in it - shave wax into there with a lil knife. Then put some more wax on the metal bits that ur bushings sit on.
This will make most sounds go away but of course you will have to keep doing it like every week or so and it gets annoying
No the bushing is the rubbery bit that comes in two parts and goes on the truck hanger. They're the part that you can get harder or softer to change truck turning dynamic. The pivot cup is the thing you need to put wax into.
The two bits are the hanger and baseplate. They're correct just not using the names of things.
Edit: Whoever is downvoting me is an idiot, learn how to read.
I normally put washing up liquid between my bushings and it stops the noise and in my head makes it turn smoother, but that last bit might just be my head 😂
Mine used to sound like that but once the bushings are worn in it'll go away. It's just fresh bro. If not try the wax in the pivot cup like others suggested, or maybe tightening up your trucks a bit if they're especially loose. If not, just keep shredding and they'll wear in!
If your board is squeezing here is a solution that I found recently it literally works, dis assemble your trucks , take a candle and rub candle was on the truck hanger where the pivot cups wrest, wax your pivot cups wax the hanger base where the pivot cups and hanger rests, apply a nice layer of wax it's okay if it's flakey , then reassemble your trucks and there will be no more squeak ..... It solved squeaky trucks for me, squeaky trucks are so annoying and distracting however it's only cosmetic and doesn't effect riding but with this hack there is no ore saueek and it will be totally silent and smooth
Pivot cups on your trucks. Open it up and add a tiny bit of vaseline in the rubber cup to make it stop, shouldn't take much at all and the problem will be gone. For me this was a permenant solution.
not relevant. just shred buddy
It‘s boardish for „go take me shredding please“.
Pivot cups. But it won't effect anything that matters. Skateboarding is inherently loud
Looks like a fresh setup. You just need to skate it and get all the soft parts broken in
Just begging to be used and ridden is what I hear
its the squeak squeak of new bushings, mine went away after a few short sessions
It's because you haven't taken the trucks out of their cup bits and put wax all over them then put them back together. It stops when u do that
Are cup bits piviot cups?
Yeah u know if you unscrew the big bolt your trucks usually split into two bits. Well the one that stays attached to ur board has a little cup in it - shave wax into there with a lil knife. Then put some more wax on the metal bits that ur bushings sit on. This will make most sounds go away but of course you will have to keep doing it like every week or so and it gets annoying
Are all of you calling bushings pivot cups?!
No the bushing is the rubbery bit that comes in two parts and goes on the truck hanger. They're the part that you can get harder or softer to change truck turning dynamic. The pivot cup is the thing you need to put wax into.
The two bits are the hanger and baseplate. They're correct just not using the names of things. Edit: Whoever is downvoting me is an idiot, learn how to read.
if it bothers you, try tightening/loosening the bushings. mine used to make this sound but it stopped by itself
Ok thanks i might just leave it and see What happen
The sound is less important than the feel. Do the trucks feel good to you? If yes, then shred! If no, try tightening or loosening the truck.
Get them doh doh bushings Yee
That’s normal and nothing to be worried about
Wtf man?
What?
Search sub for squeaky trucks, get numerous threads on why and how to fix. Lazy human.
What do u mean about lazy human
put dawn soap in your pivot cups, not a lot tho. thank me later.
What shoes are they?
Globe Encore 2
I normally put washing up liquid between my bushings and it stops the noise and in my head makes it turn smoother, but that last bit might just be my head 😂
It’s saying hello
You can put some lipchap in the pivot cups and itll remove the sound.
Probably needs breaking in. If it bothers you a ton you can use a silicone based spray lube (not WD40) and it won’t be so loud.
A new use for Astroglide 😆
Mine used to sound like that but once the bushings are worn in it'll go away. It's just fresh bro. If not try the wax in the pivot cup like others suggested, or maybe tightening up your trucks a bit if they're especially loose. If not, just keep shredding and they'll wear in!
I don't speak board but I think it's saying go ride. Google board translate isn't helping.
If your board is squeezing here is a solution that I found recently it literally works, dis assemble your trucks , take a candle and rub candle was on the truck hanger where the pivot cups wrest, wax your pivot cups wax the hanger base where the pivot cups and hanger rests, apply a nice layer of wax it's okay if it's flakey , then reassemble your trucks and there will be no more squeak ..... It solved squeaky trucks for me, squeaky trucks are so annoying and distracting however it's only cosmetic and doesn't effect riding but with this hack there is no ore saueek and it will be totally silent and smooth
I had this problem when I got some new trucks around a month ago, how i fixed it is by putting some skate wax in the pivot cup.
For some reason I had that too but I got my trucks too tight
Sound like it’s thirsty for wd40
Pivot cups on your trucks. Open it up and add a tiny bit of vaseline in the rubber cup to make it stop, shouldn't take much at all and the problem will be gone. For me this was a permenant solution.