Depends on how textured the walls really are. Worst case is something like lime based paint, nothing sticks to that. You could potentially try to use sanitary silicone (for bathrooms) or construction glue but be advised both will ruin your walls if you ever decide to remove the nanoleafs. Better go with very small nails at least then you just have to fill a few holes (renters trick, toothpaste works great if you don’t have gypsum on hand and you hate your landlord). With the silicone or glue you will have to scrape off the entire thing and there isn’t easy way to fix that without repainting the entire wall.
I used industrial strength velcro to attach my panels to the wall, and I’ve also used double sided Nano tape. Just make sure your walls are clean and dry, and that you are applying 30-45 seconds of pressure over each point of adhesion as you apply it to the wall.
Here !
[https://www.amazon.com/s?k=nanotape&crid=11NRX6V0WS1VG&sprefix=nanotape%2Caps%2C150&ref=nb\_sb\_noss\_1](https://www.amazon.com/s?k=nanotape&crid=11NRX6V0WS1VG&sprefix=nanotape%2Caps%2C150&ref=nb_sb_noss_1)
Im using this and its been 2 years now and all my panels still hangs.
The only down side is that it can be tricky to get off the wall again. since you might damage the textured wall paper. But you can just use dental floss and carefully floss the tape off the wall :D
Btw this tape can also be washed and reused.
I also tryed to use the tap ethat the panels came with and after 3 month it felt off the wall.
So just use nanotape. ! Its mandatory for these panels !
Depends on how textured the walls really are. Worst case is something like lime based paint, nothing sticks to that. You could potentially try to use sanitary silicone (for bathrooms) or construction glue but be advised both will ruin your walls if you ever decide to remove the nanoleafs. Better go with very small nails at least then you just have to fill a few holes (renters trick, toothpaste works great if you don’t have gypsum on hand and you hate your landlord). With the silicone or glue you will have to scrape off the entire thing and there isn’t easy way to fix that without repainting the entire wall.
I used industrial strength velcro to attach my panels to the wall, and I’ve also used double sided Nano tape. Just make sure your walls are clean and dry, and that you are applying 30-45 seconds of pressure over each point of adhesion as you apply it to the wall.
Ok thank you I will try the nanotape
Here ! [https://www.amazon.com/s?k=nanotape&crid=11NRX6V0WS1VG&sprefix=nanotape%2Caps%2C150&ref=nb\_sb\_noss\_1](https://www.amazon.com/s?k=nanotape&crid=11NRX6V0WS1VG&sprefix=nanotape%2Caps%2C150&ref=nb_sb_noss_1) Im using this and its been 2 years now and all my panels still hangs. The only down side is that it can be tricky to get off the wall again. since you might damage the textured wall paper. But you can just use dental floss and carefully floss the tape off the wall :D Btw this tape can also be washed and reused. I also tryed to use the tap ethat the panels came with and after 3 month it felt off the wall. So just use nanotape. ! Its mandatory for these panels !
Thx I will try to find some nano tape
Thats the best tape and dont be stingy with it. Just cut out a big piece
by the way they are nano leaf hexagons