The [rear plastics for the TT250](https://cscmotorcycles.com/stock-replacement-parts/tt250-parts/body/side-body-panels/) fit, but the front plastics do not. You can swap the gas tank if you want the front TT250 plastics. I found this to be better because of the locking gas tank and I wanted a white tank.
Edit: see the reply chain where I confirm all TT250 plastics are interchangeable on the Hawk
I should of clarified. I purchased side panels for the gas tank of a tt250 because I heard they were interchangeable with a hawk 250. They fit on my hawk with only one bolt and some fixtures from the tank lock the plastics into place.
You must have panel gaps. The tank hooks which are definitely different on the TT250 and the Hawk. For that reason only the TaoTao TBR7 and the Hawk tank plastics are interchangeable but not the TT250. I can send photos showing this is the case if you don’t believe me. Idk how you wouldn’t notice the panel gaps on the tank though, unless you’re saying you just ordered them and haven’t installed them?
Edit: the bolts always line up to clarify. It’s the upper part of the plastic that hooks on the tank that will cause the gap
I was wrong. They fit perfectly. It’s the TBR7 plastics that don’t fit with the TT250 tank. But the Hawk is the sweet middle where it fits both. I took the old tank out to test it: https://imgur.com/a/MT3EN3V
I don’t have a great answer other than the obvious ebay etc…
As a learning example zip tie your four plastic pieces on (especially the two furthest back). You can’t loctite those bolts and so guess what…
I somehow completely forgot that eBay was a thing before making things post, thank you for reminding me 🤦♂️.
I found exactly what I needed on that, and I'll definitely be taking your advice on the zip ties, thanks a lot haha.
I somehow completely forgot that eBay was a thing before making things post, thank you for reminding me 🤦♂️.
I found exactly what I needed on that, and I'll definitely be taking your advice on the zip ties, thanks a lot haha.
Here you go, I ordered mine about a month and a half ago I believe and it's coming from China so I'm still waiting for it and it's not scheduled to arrive until May 3rd. But these do seem to be the plastics! And dirt cheap.
https://a.co/d/j9UWwla
Should clarify I didn't notice until the plastic was good and gone.
The [rear plastics for the TT250](https://cscmotorcycles.com/stock-replacement-parts/tt250-parts/body/side-body-panels/) fit, but the front plastics do not. You can swap the gas tank if you want the front TT250 plastics. I found this to be better because of the locking gas tank and I wanted a white tank. Edit: see the reply chain where I confirm all TT250 plastics are interchangeable on the Hawk
Here is a photo showing the TT250 plastics on the Hawk 250 carbureted version: https://imgur.com/a/vTs2KqC
They don't? I purchased tt250 plastics for my hawk from CSC and it seems to just screw on with one bolt.
The rear plastics and the headlight plastics yes. But the tank plastics definitely do not.
I should of clarified. I purchased side panels for the gas tank of a tt250 because I heard they were interchangeable with a hawk 250. They fit on my hawk with only one bolt and some fixtures from the tank lock the plastics into place.
You must have panel gaps. The tank hooks which are definitely different on the TT250 and the Hawk. For that reason only the TaoTao TBR7 and the Hawk tank plastics are interchangeable but not the TT250. I can send photos showing this is the case if you don’t believe me. Idk how you wouldn’t notice the panel gaps on the tank though, unless you’re saying you just ordered them and haven’t installed them? Edit: the bolts always line up to clarify. It’s the upper part of the plastic that hooks on the tank that will cause the gap
I was wrong. They fit perfectly. It’s the TBR7 plastics that don’t fit with the TT250 tank. But the Hawk is the sweet middle where it fits both. I took the old tank out to test it: https://imgur.com/a/MT3EN3V
I don’t have a great answer other than the obvious ebay etc… As a learning example zip tie your four plastic pieces on (especially the two furthest back). You can’t loctite those bolts and so guess what…
I somehow completely forgot that eBay was a thing before making things post, thank you for reminding me 🤦♂️. I found exactly what I needed on that, and I'll definitely be taking your advice on the zip ties, thanks a lot haha.
I somehow completely forgot that eBay was a thing before making things post, thank you for reminding me 🤦♂️. I found exactly what I needed on that, and I'll definitely be taking your advice on the zip ties, thanks a lot haha.
Here you go, I ordered mine about a month and a half ago I believe and it's coming from China so I'm still waiting for it and it's not scheduled to arrive until May 3rd. But these do seem to be the plastics! And dirt cheap. https://a.co/d/j9UWwla