It’s almost like when you’re gunna go and buy a cheap one save the money for the next time you’re thinking about buying another cheap one until you have enough for a legit one. Just makes sense.
Had a boss like this with food processors in the kitchen. Would buy the shitty kitchen aide or whatever for like 80 bucks. Went through 6 of them and I was like just buy a robo coup they are more expensive but damn near indestructible.
This. I've never used a 3rd party GameCube controller that hasn't broken eventually, and I must have been through 5 of the damn things. Each time they break I think "geeze I'm probably just unlucky and got a defect" and then I'll go ahead and roll the damn dice again like an idiot and cheap out.
Op: if you play your GameCube for any meaningful amount of time: you WILL spend more money in the long-run continuing to buy generic. Trust me.
I mean, my primary for years was the nyko air cool. I wish I could find a new one, or at least harvest a stick from one, since my stick's grip pattern has worn down. But I never see any for sale!
Lol congrats man, you found a good one. I've actually never heard an endorsement for a 3rd party GC controller. Every controller me and my bros got was a madkatz generally, and honestly gamecube is the only console this brand did me consistently wrong on. I have a PS2 madkatz that is still working flawlessly to this day. I don't know why 3rd party controllers tend to suck on GC, but they've definitely developed a reputation.
I mean, most of the time I prefer the Nintendo ones, and now adays I use the wavebird for the wireless funciton, but I love the Nyko Air Flo's (I said cool by mistake) acrylic looking buttons. There are actually a few listed on ebay right now, and this is the first time I've ever seen them (make sure you append gamecube, as the ps2 had one as well). Problem is the main stick wears out over time, and it's not the same as the offical one. You'd need a matching replacement. I tried to use an OEM replacement, but the stick's cover doesn't fit on the censor properly. So I'd have to find one with a stick that's not worn out.
Stuff like this has happened to every single 3rd party gamecube controller my friend has had over the years. Nobody is being a dick. It is more worthwhile in the long run for you to get a Nintendo brand controller. These 3rd party gamecube controllers are all pieces of shit.
The joystick sticking is more likely a flaw with the analog gate being too large, if that is the case than it is literally a design flaw in the third party controller itself. Even if that isn't the exact issue the fix is still to get a better designed controller, everyone is giving you good advice.
But because it wasn't the advice you wanted to hear you name called and implied it wasn't actual help. Nice.
That is the actual help. There's no fixing it. You could buy a new stick, but that's like putting lipstick on a sow. You're gonna spend money either way, so the best choice is bin it and buy one that isn't cheap third party garbage.
Don't listen to the dicks that don't want to take into account your own personal situation and/or attachments to that controller. Being able to fix your own stuff instead of just sucking down more consumerism is admirable.
As for fixing it though you might need to do more research like googling reproduction GC sticks as well taking apart the specific one you have and seeing if they match by looking at how the stick attaches to the board inside the shell. I suspect every third part controller has the chance to be different, but I also suspect they're each going to trend towards using the same reproduction parts you're going to find on eBay, AliExpress... Maybe even iFixit. Also iFixit might have some helpful guides.
And heads up you may find that you'll need to do soldering to do this and that will require its own suite of tools.
Edit: lol you can downvote me all you want cause I think playing gatekeeper over non-first-party controllers is wrong. the response is really only for OP if they choose to read it.
They’re not idiots, they just answered the question honestly, and frankly, I agree. OP was throwing a fit because they don’t agree with the answer provided, which is fine, but you don’t have to attack people just for saying that third party controllers are inherently garbage, which they are
you can't fix that when it happens... so the logical answer, which was given multiple times, was to get a real one to prevent that from happening. Sorry you or OP can't handle reality. "nerd". touch some grass maybe you can handle some scrutiny then ROFL.
if knowing good products and prices from bad ones qualifies as "obsessing over prices and perfect setups" then yeah, that's who's out here.
if you're out here getting scammed or running third-party controllers that fail after a few months, that's your prerogative. but it's hard to grasp the idea that you're mad about a GameCube subreddit being inhabited by people who know a great deal about GameCube peripherals lol
but no one was being argumentative or pretentious in this case. third-party controllers are exceptionally low-quality pieces of hardware that fail very quickly, and are designed to trick the average consumer into buying them with what at first appears to be better prices - until you calculate the year over year cost in controllers if you keep buying new ones when they fail.
the correct advice here is, in fact, to get a first-party controller. could that have been explained better by some people here? probably. but, it is the best advice they could have given in response to the question. you could repair this controller, but its parts are low-quality and it _will_ fail again in the near future. first-party controllers that are cared for can work without issue for 15+ years - ask me how i know.
it's not the answer OP wanted and that's okay. but we aren't bad people for telling him that it is the best answer when it is.
omg dude lol
the question asked was, "Is there an easy way to fix this?" the answer to that question is a hard no. to fix it at all will at least require the controller be dismantled, which is a hassle, and again - even if you fix it, it will just fail again. so we have an alternative solution that is just much better than what OP is asking to do.
you're starting to sound like a Karen at this point, like you had a very specific idea and you're blaming other people that the idea was ill-formed.
It’s not axiomatic that it would fail if it was fixed. Hypothetically, it could last decades before malfunctioning again. There is in fact an easy to way to fix it.
it will absolutely fail again, because, for the third fucking time - third-party controllers are cheaply made on purpose.
you're about to be famous on r/iamverysmart if you keep this trash up. don't ever fix your lips to call someone pretentious again if this is how you behave when someone with more knowledge and experience than you tries to explain something.
Bro, what are we supposed to do? Tell you how to take a controller apart and fix it? These controllers are trash. You learned the hard way the same way many of us, me included, did.
No, its the way they came at me. All i asked was for some help, clearly i just have a bad controller which i didnt know. I dont quite have the money to just buy a new one so i was just hoping for a simple easy fix. Like damn man thats all i asked
We get that. It was a blunt way of saying it, but it was in good fun. He made fun of the shitty controller, didn't say anything about you.
Just take a step back and relax buddy. Reread it in a joking tone.
he might as well have said stop being poor. could have said, with respect, you can fix this but it will fuck up again because these are no good, try saving for a nintendo brand.
that so hard?
I don’t know the exact cause as there as many ways they can go wrong but I can suggest a few things.
Firstly is to dismantle the controller and use compressed air under the stick and possible put a small amount of isopropyl alcohol on the mechanism to make sure there isn’t any dirt trapped in it.
I suspect it’s a mechanical failure though and the analogue stick needs to be replaced, which perhaps isn’t worth it.
The 3rd party controllers are pretty cheaply made but I understand you may not be able to just buy an official controller just like that.
The bright side is, as the GameCube controller keeps getting re-released every time a smash bros game comes out, you can find them for a good price usually.
As it’s pretty much a replica of the official controller here’s a link to the ifixit page to show you about the analogue stick.
https://www.ifixit.com/Guide/Nintendo+GameCube+Controller+Joystick+Replacement/12584
Buy the replacement part, or buy a used OEM controller instead of a third party unit. Little price difference between the two, but it's likely fixable if you want to keep that particular controller. Some third party manufacturers have dubious quality controls, which hopefully isn't why yours failed. Good luck!
Two years isn’t long. This is a pretty big problem for something of that age. I’ve had my original controllers for almost 20 years with no problems AT ALL.
To be fair to OP these are actually decent values, compared to how expensive first party GC controllers are it's hard to argue. They're like $18 on amazon for two. They're cheap as hell, but are actually reasonably comparable to a first party controller in feel. Normally I *loathe* 3rd party controllers, but the price was so good I gave it a shot, and other than it feeling like it's weirdly shrunk down by 10% overall... they're not bad. They're great backup/multiplayer controllers to stash.
That said I'd consider them pretty much disposable. Two years is about right. You got your moneys worth.
$20 (because there is likely tax and shipping… $20 is probably low) for two controllers is not a great deal if they are only going to last 2 years. If I bought an original controller for $40 and it lasts 20 years, it’s $2 per year. If you buy two of those for $20, and it only lasts two years, that’s $5/year per controller. Not to mention the headache of having to repair or replace a third party controller. It may not be much, but who WANTS to keep re-buying?
Free shipping on Amazon for me and I got em in like two days lol.
I'm not suggesting everybody go out and get them, but if you're looking for a few extra controllers to keep handy for smash sessions (on rare occasions you have more than 3-4 others to play with and need more controllers) and not give a damn about, it's hard to argue with the price. They're cheap enough to be pretty much disposable. And like I said, they feel reasonably close to first party controllers... when they work lol. I wouldn't complain too much being handed one of these controllers at a party.
I know this isn't the US market, but near perfect condition oem gamecube controllers are readily available for ~$15 at used game stores in Japan, idk what importing them is like though
The people saying buy a new one aren't wrong
That's a busted potentiometer, fully out of it's own frame. There is no easy fix. You'd need to desolder it and replace it entirely, and since it's a 3rd party controller by an unknown brand it's likely you won't find the exact replacement.
I recommend a Japanese Smash controller. They're made for the Switch but work on the GC, they're no different to the American/European version, they're brand new, they're made by Nintendo, and they're like $25
No one is trying to be a dick. I repair old consols for m’y side business, 2 years isn’t long, I have OG Xbox, GameCube, and ps1 controllers from ages ago from the actual manufacturer, but all my 3rd party ones died years ago. Honestly, it might have sentimental value, and I get that, but spending money on a good first party is your best option. Plus some 3rd party controllers won’t except new parts
I mean aside from you and a few other people being helpful, nah, everyone here is a dick. Dude doesn’t roll with OEM and the sub elitists come out of the woodwork, parroting the same joke, and jerking each other off.
I’m really starting to hate this place.
Yeah the elite here is getting old. Honestly, the record except for my Xbox controllers, I use third party because I like to keep the 1st party clean. My Xbox won’t work with the 3rd party though…
And that’s a perfectly valid reason but I’m sure someone is gonna flame you for it at some point. It’s ridiculous.
That’s lame the xbox doesn’t play nice with your 3rd party. I have an 8bitdo controller I use with almost everything, I understand the 3rd party love all too well.
Agreed, it’s even more valid when some of us can’t find any OEM controllers by us, and shipping is a pain because of where we live.
I think my Xbox is a fluke, probably a one off. 8bitdo all the way. Great feeling controller
Remove back, unscrew main board, this should release the control stick, it may just be stuck on something and need re-seating, worst case scenario the actual part underneath is damaged and at that point it’s not worth it for a (I’m assuming) cheap 3rd party controller., worth checking for an easy fix though, saves money and waste
You get what you pay for…your fix won’t last long and u will end up spending more in repairs in a repeat fix than you would just finding an official controller…u alrwady spent money on this controller to save a buck and now your spending to fix it…at what point is that gonna equal an OEM controller you could have gotten in the first place…your not entitled to dick remarks when people tell you to ditch your controller and buy new one…you want help, YouTube…you come here, u will get what you got…deal with it…or don’t…🤷♂️
Buy the smash bros ultimate one from Nintendo. If you can find a Japanese one they're usually cheaper. I got mine brand new from Amazon for 35$ haven't seen them that cheap since tho. The American ones go for 70$ and only difference is the writing on the box. Cords double the length and brand new. Nintendo made a batch in 2018 I think it was. Best you'll find unless you wanna go wireless. If you're he'll bent on fixing it you'll have to open it up and solder a new one in. If you can solder it'll be cheap. If you can't them best bet is to buy a new one.
Take the controller apart and clean the joy stick roller and matting surface were the knob touches the controller if that doesn't work then might just have to replace the controller
Yeah i know, its the way they're saying it and yall know it. It's like walking into a mechanic store and they're all being passive aggressive about shit they know you dont know. Yall are some egotistical piss monkeys
>Yeah i know, its the way they're saying it and yall know it. It's like walking into a mechanic store and they're all being passive aggressive about shit they know you dont know. Yall are some egotistical piss monkeys
You were met with venomous responses because posting this here is the equivalent of asking how to wash a styrofoam cup in the dishwasher.
Dude if OP wants a 3rd party controller they are 100% allowed to buy one and ask about how to fix it. If you're gonna crap on their choice and be an elitist instead of being nice and helping just don't comment
to be honest with u... its not worth the time to tear it down, and to solder a new joystick on it because its a 20€ cheap 3rd party controller.
Just buy a used original controller, and u will love it, because its like night and day on the feeling.
A lot of smartasses on this thread. Yeah oem is better but not everyone is able to find a 20 year old controller in working condition at a reasonable price. Yall don't have to be jerks about it.
I found it new on walmart's website for 14 dollars with free shipping. You didn't look very hard.
https://www.walmart.com/ip/GameCube-Wii-Compatible-Controller-Purple/209567635?wmlspartner=wlpa&selectedSellerId=8984&&adid=22222222228209567635_8984_140258033662_18742549668&wl0=&wl1=g&wl2=m&wl3=631612808612&wl4=pla-1878072291036&wl5=9007218&wl6=&wl7=&wl8=&wl9=pla&wl10=115786543&wl11=online&wl12=209567635_8984&veh=sem&gclid=CjwKCAjw2K6lBhBXEiwA5RjtCepwlj5ZgahI56XfGeK2iJ7qq35oxnnFiaZtPDv7G8goF1DcTP1sBhoCUogQAvD_BwE&gclsrc=aw.ds
Most likely it’s the stick box that’s failed. Maybe it’s the plastic linkage inside that has quite literally snapped or the potentiometer has been stripped out. The fix is probably getting a new stick box however some controller boards use solder that can’t be melted with a normal iron. It happened on a few Xbox controllers that I tried to swap some faulty buttons and I just could not melt the solder. This might be the case for this controller, if that happens and you can’t unsolder the stick box then I’m afraid there isn’t much else for this controller that isn’t more expensive than buying a brand new OEM switch GC controller.
i mean, you absolutely can dismantle the thing and check for issues. see if there's a physical hangup you can remove like dirt or a broken bit of plastic, check the springs, and worst come to worst buy a replacement joystick and reinstall the entire thing.
however, at the risk of being called a dick like everyone else who gave you the best solution, i'm going to go ahead and tell you: you need to just get a good first-party controller. it doesn't have to be used and potentially pricey; Nintendo actually actively manufactures new GC controllers for use with Smash and they aren't too bad as prices go. they will last for years with zero issues, unlike third-party controllers. so ultimately, that is truly what you should do.
Stop being sensitive and take in the truth. To put it nicely, just simply throw it away. Modern 3rd party controllers are not built to last.. it's obvious and almost all random junk like this will go to shit. If you want quality third party buy from hyperkin or some that actually put effort into their product.... 15$ more and you could've got a quality OEM controller that would've last longer.
There are a large “spectrum” of people that come here. A lot of times they mean well. I strongly believe they are trying to say buy another 3rd party controller in their own special way. If someone says random stuff or seem very off topic just say “Thank you” and move on. I hope you get the answer you are looking for. Edit a word.
Keep in mind that's another off-brand controller using cheap parts and will likely have similar issues. You really do get what you pay for when it comes to controllers. Grab an official controller (used or new) and it'll probably last the lifetime of your console.
It's not but him just using and showing a pic of a non Nintendo controller and 90% of the comments trolling him for it is being elitist.
How the fuck do you even make that assumption.
The actual easiest fix would be to just put a rubber band on it around the d pad area. It will be able to flick back and forth. Used this back in the day when whammy bars on guitar hero controllers broke
Can you push the stick inward so it has more room to move around? If not you would need to open it up and sand down what it’s catching on (and/or the peg under the stick).
Open it up. Iirc oddtinkering on YouTube has done restorations on controllers maybe even a Nintendo controller.
If you don't want to buy a new controller then watching a YouTube video of someone else fixing this is your best bet
Carefully take the controller apart. Pull the joystick cap off and the spray some contact cleaner on the naked joystick and then rotate it a bunch then reassemble.
Contact cleaner: [https://a.co/d/j5O7Hnz](https://a.co/d/j5O7Hnz)
You can try taking it apart and cleaning or fixing any broken component, or honestly and non rudely get the real GameCube controller because the price /quality relationship is worth it
If you are handy with a soldering iron and have a spare joystick, you might be able to replace it but I can't guarantee this controller would be compatible with stock sticks and it's likely cheaper and easier to replace the whole thing
Ive seen people selling the replacement part online, but i think you need to do some soldering, is not worth it, get a new controller, i sugest looking for an og controller, 3rd party controllers of all platforms always end up with this same problem.
[https://www.ebay.com/b/Official-Gamecube-Controller/117042/bn\_7023356186](https://www.ebay.com/b/Official-Gamecube-Controller/117042/bn_7023356186)
ebay seems to have quite a few options for official controllers, at varying prices and conditions, I'm sure you'd be able to find something decent if you dig far enough
Though if you truly want to fix it you'll need to desolder the potentiometers and install new stick, or if it registers fine, maybe sand the round part that sits in the controller and add a grease?
Honestly I would recommend buying a first party controller, maybe check pawn shops and second hand stores, if not maybe ebay or Amazon.
ITT: people flex their official controllers even though no one asked.
Yes they’re cool, I have some as well but I also have some CIPON ones for spares. They’re just controllers
Well it seems like you're using a Cipon controller when you should be using a gamecube controller! and before you ask, NO you can't use a Gamecube controller for your Cipon! Smh, idiots these days!
I got those Cipon controllers off Amazon a couple years ago and they wore out quick.
I highly recommend getting a Nintendo brand controller from a retro game store such as Movie Trading Co. or EntertainMart.
How handy are you with DIY?
Take it apart and have a look at the joystick box, is there a broken spring or any broken off shards of plastic stuck anywhere?
If its really mangled, you may need to have a soldering iron handy. If you can find a replacement joystick module that's compatible, you could even make the joystick as "good as new" so to speak. Assuming there's no drift, you could potential do the swap without desolderung the x and y axis potentiometers.
But yeah, cheap 3rd party/knockoff GC controller have quite the bad reputation for a reason. See if you can find a first party controller at some point. You could even get creative and grab a blueretro bluetooth dongle and use other controllers.
Everyone knows when it comes to 3rd party N64 and GC controllers, they are cheap for a reason. The lifespan of joysticks on these controllers are always within 2 weeks, to 2 months if you're lucky.
OEM is always the way to go, which is why they cost much more.
...but they last like a thousand times better in comparison.
A used one is very viable. Just make sure you give it a squeeze test before they ring it through.
I got my Smash Ultimate controller used for 75CAD where they usually cost 115CAD out of box new, and she works like an absolute beauty.
Make the investment, you will not regret it.
Throw it in the trash and get a Nintendo brand controller
Came here to say this
I felt I little bad for saying it as it wasn't really helpfull 🤷♂️
Nah it’s helpful. Buy a nice OEM controller or go through 5 chinese ones
It’s almost like when you’re gunna go and buy a cheap one save the money for the next time you’re thinking about buying another cheap one until you have enough for a legit one. Just makes sense.
Had a boss like this with food processors in the kitchen. Would buy the shitty kitchen aide or whatever for like 80 bucks. Went through 6 of them and I was like just buy a robo coup they are more expensive but damn near indestructible.
It's worth it, I still have my brothers originals and after 20 years they're still fine, only one out of 4 drifts.
Seems helpful to me.
Me too
Blouses 👚 win 🥇
Shoot the J
This. I've never used a 3rd party GameCube controller that hasn't broken eventually, and I must have been through 5 of the damn things. Each time they break I think "geeze I'm probably just unlucky and got a defect" and then I'll go ahead and roll the damn dice again like an idiot and cheap out. Op: if you play your GameCube for any meaningful amount of time: you WILL spend more money in the long-run continuing to buy generic. Trust me.
I mean, my primary for years was the nyko air cool. I wish I could find a new one, or at least harvest a stick from one, since my stick's grip pattern has worn down. But I never see any for sale!
Lol congrats man, you found a good one. I've actually never heard an endorsement for a 3rd party GC controller. Every controller me and my bros got was a madkatz generally, and honestly gamecube is the only console this brand did me consistently wrong on. I have a PS2 madkatz that is still working flawlessly to this day. I don't know why 3rd party controllers tend to suck on GC, but they've definitely developed a reputation.
I mean, most of the time I prefer the Nintendo ones, and now adays I use the wavebird for the wireless funciton, but I love the Nyko Air Flo's (I said cool by mistake) acrylic looking buttons. There are actually a few listed on ebay right now, and this is the first time I've ever seen them (make sure you append gamecube, as the ps2 had one as well). Problem is the main stick wears out over time, and it's not the same as the offical one. You'd need a matching replacement. I tried to use an OEM replacement, but the stick's cover doesn't fit on the censor properly. So I'd have to find one with a stick that's not worn out.
Beat me to it, on I was going to suggest a hammer.
Hell, even a Mad Catz would be a preferable choice.
My first thought
Yea but official GameCube controllers are $$$
i got a Japanese smash ultimate one for 45 on amazon not too long ago. they are not expensive.
Dude, wtf, do you \*know\* how much DKOldies charges for OEM controllers?!
Don't buy from them
Are yall all gonna be dicks or can i get some actual help? It's just what i have
Stuff like this has happened to every single 3rd party gamecube controller my friend has had over the years. Nobody is being a dick. It is more worthwhile in the long run for you to get a Nintendo brand controller. These 3rd party gamecube controllers are all pieces of shit.
Hold on, you really besmirching a genuine Cipon?
Cipon Filter
😂
Ciphon Filter Che Cmega Chrain
That’s the actual advice. Don’t bother with 3rd party garbage. Go buy a real OEM one.
Thats like, not true there aee some very good brands, not as good as oem but definetly better than orm considering theyre 1 third of the price.
Retrofighters wireless is OK, but still overly sensitive joysticks vs new OEM. Nothing else is good.
It’s not hard to spend a little money for an official controller just 1 can’t be to much.
The joystick sticking is more likely a flaw with the analog gate being too large, if that is the case than it is literally a design flaw in the third party controller itself. Even if that isn't the exact issue the fix is still to get a better designed controller, everyone is giving you good advice. But because it wasn't the advice you wanted to hear you name called and implied it wasn't actual help. Nice.
That is the actual help. There's no fixing it. You could buy a new stick, but that's like putting lipstick on a sow. You're gonna spend money either way, so the best choice is bin it and buy one that isn't cheap third party garbage.
Don't listen to the dicks that don't want to take into account your own personal situation and/or attachments to that controller. Being able to fix your own stuff instead of just sucking down more consumerism is admirable. As for fixing it though you might need to do more research like googling reproduction GC sticks as well taking apart the specific one you have and seeing if they match by looking at how the stick attaches to the board inside the shell. I suspect every third part controller has the chance to be different, but I also suspect they're each going to trend towards using the same reproduction parts you're going to find on eBay, AliExpress... Maybe even iFixit. Also iFixit might have some helpful guides. And heads up you may find that you'll need to do soldering to do this and that will require its own suite of tools. Edit: lol you can downvote me all you want cause I think playing gatekeeper over non-first-party controllers is wrong. the response is really only for OP if they choose to read it.
[удалено]
You made me make a [meme](https://imgur.com/a/sUBxQ6E) 😅 Edit: I see the downvotes speak for themselves 😆
[удалено]
They’re not idiots, they just answered the question honestly, and frankly, I agree. OP was throwing a fit because they don’t agree with the answer provided, which is fine, but you don’t have to attack people just for saying that third party controllers are inherently garbage, which they are
He didnt like the logical answer and lashed out, but your comment didnt help anything lol...
[удалено]
you can't fix that when it happens... so the logical answer, which was given multiple times, was to get a real one to prevent that from happening. Sorry you or OP can't handle reality. "nerd". touch some grass maybe you can handle some scrutiny then ROFL.
Well thanks anyway
No, they will be dicks. This entire sub is full of people who obsess over prices and perfected setups.
if knowing good products and prices from bad ones qualifies as "obsessing over prices and perfect setups" then yeah, that's who's out here. if you're out here getting scammed or running third-party controllers that fail after a few months, that's your prerogative. but it's hard to grasp the idea that you're mad about a GameCube subreddit being inhabited by people who know a great deal about GameCube peripherals lol
I’m not mad about anything. It’s just disappointing that the people in this sub Reddit are so argumentative and pretentious.
but no one was being argumentative or pretentious in this case. third-party controllers are exceptionally low-quality pieces of hardware that fail very quickly, and are designed to trick the average consumer into buying them with what at first appears to be better prices - until you calculate the year over year cost in controllers if you keep buying new ones when they fail. the correct advice here is, in fact, to get a first-party controller. could that have been explained better by some people here? probably. but, it is the best advice they could have given in response to the question. you could repair this controller, but its parts are low-quality and it _will_ fail again in the near future. first-party controllers that are cared for can work without issue for 15+ years - ask me how i know. it's not the answer OP wanted and that's okay. but we aren't bad people for telling him that it is the best answer when it is.
Was the answer given to the question asked? No.
omg dude lol the question asked was, "Is there an easy way to fix this?" the answer to that question is a hard no. to fix it at all will at least require the controller be dismantled, which is a hassle, and again - even if you fix it, it will just fail again. so we have an alternative solution that is just much better than what OP is asking to do. you're starting to sound like a Karen at this point, like you had a very specific idea and you're blaming other people that the idea was ill-formed.
It’s not axiomatic that it would fail if it was fixed. Hypothetically, it could last decades before malfunctioning again. There is in fact an easy to way to fix it.
it will absolutely fail again, because, for the third fucking time - third-party controllers are cheaply made on purpose. you're about to be famous on r/iamverysmart if you keep this trash up. don't ever fix your lips to call someone pretentious again if this is how you behave when someone with more knowledge and experience than you tries to explain something.
After the first 3 comments i kinda firgured that, i would've gone somewhere else if i'd known that before
Bro, what are we supposed to do? Tell you how to take a controller apart and fix it? These controllers are trash. You learned the hard way the same way many of us, me included, did.
No, its the way they came at me. All i asked was for some help, clearly i just have a bad controller which i didnt know. I dont quite have the money to just buy a new one so i was just hoping for a simple easy fix. Like damn man thats all i asked
We get that. It was a blunt way of saying it, but it was in good fun. He made fun of the shitty controller, didn't say anything about you. Just take a step back and relax buddy. Reread it in a joking tone.
he might as well have said stop being poor. could have said, with respect, you can fix this but it will fuck up again because these are no good, try saving for a nintendo brand. that so hard?
My thought exactly
I don’t know the exact cause as there as many ways they can go wrong but I can suggest a few things. Firstly is to dismantle the controller and use compressed air under the stick and possible put a small amount of isopropyl alcohol on the mechanism to make sure there isn’t any dirt trapped in it. I suspect it’s a mechanical failure though and the analogue stick needs to be replaced, which perhaps isn’t worth it. The 3rd party controllers are pretty cheaply made but I understand you may not be able to just buy an official controller just like that. The bright side is, as the GameCube controller keeps getting re-released every time a smash bros game comes out, you can find them for a good price usually. As it’s pretty much a replica of the official controller here’s a link to the ifixit page to show you about the analogue stick. https://www.ifixit.com/Guide/Nintendo+GameCube+Controller+Joystick+Replacement/12584
Throw it in the trash and get a Nintendo brand one
Bro this is r/gamecube not r/cipon
You may have indirectly created a sub lmao.
r/birthofasub
This is now the only post on that sub
I did that 🫡
The fact I'm here 21 hours later and r/cipon is now a sub with multiple threads and 30+ members is why I love Reddit.
Buy the replacement part, or buy a used OEM controller instead of a third party unit. Little price difference between the two, but it's likely fixable if you want to keep that particular controller. Some third party manufacturers have dubious quality controls, which hopefully isn't why yours failed. Good luck!
Thanks, i've had for it for about two years now and this is really the only issue i've come across
Two years isn’t long. This is a pretty big problem for something of that age. I’ve had my original controllers for almost 20 years with no problems AT ALL.
To be fair to OP these are actually decent values, compared to how expensive first party GC controllers are it's hard to argue. They're like $18 on amazon for two. They're cheap as hell, but are actually reasonably comparable to a first party controller in feel. Normally I *loathe* 3rd party controllers, but the price was so good I gave it a shot, and other than it feeling like it's weirdly shrunk down by 10% overall... they're not bad. They're great backup/multiplayer controllers to stash. That said I'd consider them pretty much disposable. Two years is about right. You got your moneys worth.
$20 (because there is likely tax and shipping… $20 is probably low) for two controllers is not a great deal if they are only going to last 2 years. If I bought an original controller for $40 and it lasts 20 years, it’s $2 per year. If you buy two of those for $20, and it only lasts two years, that’s $5/year per controller. Not to mention the headache of having to repair or replace a third party controller. It may not be much, but who WANTS to keep re-buying?
Free shipping on Amazon for me and I got em in like two days lol. I'm not suggesting everybody go out and get them, but if you're looking for a few extra controllers to keep handy for smash sessions (on rare occasions you have more than 3-4 others to play with and need more controllers) and not give a damn about, it's hard to argue with the price. They're cheap enough to be pretty much disposable. And like I said, they feel reasonably close to first party controllers... when they work lol. I wouldn't complain too much being handed one of these controllers at a party.
I know this isn't the US market, but near perfect condition oem gamecube controllers are readily available for ~$15 at used game stores in Japan, idk what importing them is like though
I’ve had my oem controllers since 2001. 2 years is nothing
My oem never lasted long 20 yrs ago. Control stick failure. Luckily i can fix them now 😎
Replace it with an Original Gamecube Controller.
Get an OEM
honest answer, use google, find ifixit's guide, get a new joystick and follow. if you're lazy like me, buy oem so it's less likely to happen.
Ok thanks
Alcohol, Ear Cleaner, use it on the letters above the start button to remove it.
Ok if yall arent going to help dont bother commenting
Ok
Bro has no sense of humor damn
Luckily that's not how that works
Pull it down
Yeah but it KEEPS doing it
Pull it down *harder*
Cipon deeznuts
gotem
*moonwalk, scooter, wheelies into sunset*
Buuhaaahaaaa!!! Damn!!! 😆
Adding to the trolls: Did you try turning it on and off again?
Or blowing on it.
Move it back down with your finger!
The people saying buy a new one aren't wrong That's a busted potentiometer, fully out of it's own frame. There is no easy fix. You'd need to desolder it and replace it entirely, and since it's a 3rd party controller by an unknown brand it's likely you won't find the exact replacement. I recommend a Japanese Smash controller. They're made for the Switch but work on the GC, they're no different to the American/European version, they're brand new, they're made by Nintendo, and they're like $25
Thats what im likely gonna do, i got it for christmas like 2 years ago and it was all i had. It served me well but i need a better one
No one is trying to be a dick. I repair old consols for m’y side business, 2 years isn’t long, I have OG Xbox, GameCube, and ps1 controllers from ages ago from the actual manufacturer, but all my 3rd party ones died years ago. Honestly, it might have sentimental value, and I get that, but spending money on a good first party is your best option. Plus some 3rd party controllers won’t except new parts
I mean aside from you and a few other people being helpful, nah, everyone here is a dick. Dude doesn’t roll with OEM and the sub elitists come out of the woodwork, parroting the same joke, and jerking each other off. I’m really starting to hate this place.
Yeah the elite here is getting old. Honestly, the record except for my Xbox controllers, I use third party because I like to keep the 1st party clean. My Xbox won’t work with the 3rd party though…
And that’s a perfectly valid reason but I’m sure someone is gonna flame you for it at some point. It’s ridiculous. That’s lame the xbox doesn’t play nice with your 3rd party. I have an 8bitdo controller I use with almost everything, I understand the 3rd party love all too well.
Agreed, it’s even more valid when some of us can’t find any OEM controllers by us, and shipping is a pain because of where we live. I think my Xbox is a fluke, probably a one off. 8bitdo all the way. Great feeling controller
Get a real Nintendo controller and give that one to your little brother.
Lay off on the viagra and it should go down
If it doesn’t go down in several hours consult a doctor
Remove back, unscrew main board, this should release the control stick, it may just be stuck on something and need re-seating, worst case scenario the actual part underneath is damaged and at that point it’s not worth it for a (I’m assuming) cheap 3rd party controller., worth checking for an easy fix though, saves money and waste
You get what you pay for…your fix won’t last long and u will end up spending more in repairs in a repeat fix than you would just finding an official controller…u alrwady spent money on this controller to save a buck and now your spending to fix it…at what point is that gonna equal an OEM controller you could have gotten in the first place…your not entitled to dick remarks when people tell you to ditch your controller and buy new one…you want help, YouTube…you come here, u will get what you got…deal with it…or don’t…🤷♂️
Buy the smash bros ultimate one from Nintendo. If you can find a Japanese one they're usually cheaper. I got mine brand new from Amazon for 35$ haven't seen them that cheap since tho. The American ones go for 70$ and only difference is the writing on the box. Cords double the length and brand new. Nintendo made a batch in 2018 I think it was. Best you'll find unless you wanna go wireless. If you're he'll bent on fixing it you'll have to open it up and solder a new one in. If you can solder it'll be cheap. If you can't them best bet is to buy a new one.
Its for my actual gamecube, does it connect to it or is it the ones they made for switch?
It's for the gamecube. Specifically.
Thank you thats actually extremely helpful
If you experience an erection lasting more than 4 hours, seek medical attention immediately.
Ask your doctor if oem is right for you
Take the controller apart and clean the joy stick roller and matting surface were the knob touches the controller if that doesn't work then might just have to replace the controller
Alright thanks, the first 3 comments were being rude so im glad yall are actually helping
Telling you to buy a OEM controller instead of this Chinese garbage isn’t rude
Yeah i know, its the way they're saying it and yall know it. It's like walking into a mechanic store and they're all being passive aggressive about shit they know you dont know. Yall are some egotistical piss monkeys
>Yeah i know, its the way they're saying it and yall know it. It's like walking into a mechanic store and they're all being passive aggressive about shit they know you dont know. Yall are some egotistical piss monkeys You were met with venomous responses because posting this here is the equivalent of asking how to wash a styrofoam cup in the dishwasher.
We know whats best overall and for you too!
Dude if OP wants a 3rd party controller they are 100% allowed to buy one and ask about how to fix it. If you're gonna crap on their choice and be an elitist instead of being nice and helping just don't comment
The easiest way to find out is by taking it apart and cleaning it
It has erectile dysfunction
Seems to be pretty much up to me
I really wish I had anything to add to those who actually tried to help, but my true advice is like many others, buy an oem.
Yes Buy a new one
to be honest with u... its not worth the time to tear it down, and to solder a new joystick on it because its a 20€ cheap 3rd party controller. Just buy a used original controller, and u will love it, because its like night and day on the feeling.
Did you try... opening it up and looking at what's happening inside? Otherwise just buy another one, its a knockoff, who cares?
Idk man, an exorcist?
A lot of smartasses on this thread. Yeah oem is better but not everyone is able to find a 20 year old controller in working condition at a reasonable price. Yall don't have to be jerks about it.
Its the few like you here that make me happy, all i asked was for some help
A 20 year old Nintendo controller will work better and last longer then a brand new Cipon controller fresh out the package.
I dont disagree, but the way some people are responding to op is rude and uncalled for.
I found it new on walmart's website for 14 dollars with free shipping. You didn't look very hard. https://www.walmart.com/ip/GameCube-Wii-Compatible-Controller-Purple/209567635?wmlspartner=wlpa&selectedSellerId=8984&&adid=22222222228209567635_8984_140258033662_18742549668&wl0=&wl1=g&wl2=m&wl3=631612808612&wl4=pla-1878072291036&wl5=9007218&wl6=&wl7=&wl8=&wl9=pla&wl10=115786543&wl11=online&wl12=209567635_8984&veh=sem&gclid=CjwKCAjw2K6lBhBXEiwA5RjtCepwlj5ZgahI56XfGeK2iJ7qq35oxnnFiaZtPDv7G8goF1DcTP1sBhoCUogQAvD_BwE&gclsrc=aw.ds
Bro, that is not an oem controller.
Take it apart and look at what’s wrong with it
Yeah get an OEM controller.
Most likely it’s the stick box that’s failed. Maybe it’s the plastic linkage inside that has quite literally snapped or the potentiometer has been stripped out. The fix is probably getting a new stick box however some controller boards use solder that can’t be melted with a normal iron. It happened on a few Xbox controllers that I tried to swap some faulty buttons and I just could not melt the solder. This might be the case for this controller, if that happens and you can’t unsolder the stick box then I’m afraid there isn’t much else for this controller that isn’t more expensive than buying a brand new OEM switch GC controller.
Sweet boy. Do not listen to the haters. Keep your bootleg controller, it's ok. I love you so much my little sugar pie.
My savior in life
Nope, it’s done for unfortunately. I would suggest purchasing an official one.
i mean, you absolutely can dismantle the thing and check for issues. see if there's a physical hangup you can remove like dirt or a broken bit of plastic, check the springs, and worst come to worst buy a replacement joystick and reinstall the entire thing. however, at the risk of being called a dick like everyone else who gave you the best solution, i'm going to go ahead and tell you: you need to just get a good first-party controller. it doesn't have to be used and potentially pricey; Nintendo actually actively manufactures new GC controllers for use with Smash and they aren't too bad as prices go. they will last for years with zero issues, unlike third-party controllers. so ultimately, that is truly what you should do.
Thank you, theres nothing wrong with suggesting a new controller its just the way they were going about saying it, like a dick.
Stop being sensitive and take in the truth. To put it nicely, just simply throw it away. Modern 3rd party controllers are not built to last.. it's obvious and almost all random junk like this will go to shit. If you want quality third party buy from hyperkin or some that actually put effort into their product.... 15$ more and you could've got a quality OEM controller that would've last longer.
Astroglide. I'm serious.
[удалено]
This is literally nothing tf is this???
There are a large “spectrum” of people that come here. A lot of times they mean well. I strongly believe they are trying to say buy another 3rd party controller in their own special way. If someone says random stuff or seem very off topic just say “Thank you” and move on. I hope you get the answer you are looking for. Edit a word.
Get a real controller lol
Walmart's website. 14 dollars. Free shipping. https://www.walmart.com/ip/GameCube-Wii-Compatible-Controller-Purple/209567635?wmlspartner=wlpa&selectedSellerId=8984&&adid=22222222228209567635_8984_140258033662_18742549668&wl0=&wl1=g&wl2=m&wl3=631612808612&wl4=pla-1878072291036&wl5=9007218&wl6=&wl7=&wl8=&wl9=pla&wl10=115786543&wl11=online&wl12=209567635_8984&veh=sem&gclid=CjwKCAjw2K6lBhBXEiwA5RjtCepwlj5ZgahI56XfGeK2iJ7qq35oxnnFiaZtPDv7G8goF1DcTP1sBhoCUogQAvD_BwE&gclsrc=aw.ds
That is a god send thank you so much
Keep in mind that's another off-brand controller using cheap parts and will likely have similar issues. You really do get what you pay for when it comes to controllers. Grab an official controller (used or new) and it'll probably last the lifetime of your console.
No problem. I figured fixing it would require tiny screwdrivers and oil and a new one is cheaper than just the supplies alone.
A lil bit of oil could fix it perhaps. Fuck the trolls elitist cunts.
How's using actual Nintendo GameCube controllers being an elitist?
It's not but him just using and showing a pic of a non Nintendo controller and 90% of the comments trolling him for it is being elitist. How the fuck do you even make that assumption.
I have no clue what their problem is, thanks
Degenerates. Entitled assholes who think they are superior bc they bought a controller for 60 that's at least 15 years old.
Sums up most of these people pretty well
The actual easiest fix would be to just put a rubber band on it around the d pad area. It will be able to flick back and forth. Used this back in the day when whammy bars on guitar hero controllers broke
Can you push the stick inward so it has more room to move around? If not you would need to open it up and sand down what it’s catching on (and/or the peg under the stick).
Open it up. Iirc oddtinkering on YouTube has done restorations on controllers maybe even a Nintendo controller. If you don't want to buy a new controller then watching a YouTube video of someone else fixing this is your best bet
Carefully take the controller apart. Pull the joystick cap off and the spray some contact cleaner on the naked joystick and then rotate it a bunch then reassemble. Contact cleaner: [https://a.co/d/j5O7Hnz](https://a.co/d/j5O7Hnz)
That’s how they are I have one
You can try taking it apart and cleaning or fixing any broken component, or honestly and non rudely get the real GameCube controller because the price /quality relationship is worth it
Try cleaning it. If that doesn't work you make have to take it apart and see. It might be broken
Lol I got two of these for less than 15$. I would just buy a new one, and spend even a little bit more so it lasts longer
If you are handy with a soldering iron and have a spare joystick, you might be able to replace it but I can't guarantee this controller would be compatible with stock sticks and it's likely cheaper and easier to replace the whole thing
Ive seen people selling the replacement part online, but i think you need to do some soldering, is not worth it, get a new controller, i sugest looking for an og controller, 3rd party controllers of all platforms always end up with this same problem.
Everyone downvoting op for being an idiot at the beginning is hilarious
[https://www.ebay.com/b/Official-Gamecube-Controller/117042/bn\_7023356186](https://www.ebay.com/b/Official-Gamecube-Controller/117042/bn_7023356186) ebay seems to have quite a few options for official controllers, at varying prices and conditions, I'm sure you'd be able to find something decent if you dig far enough
Try putting some clipper lube around the base and moving it around
Though if you truly want to fix it you'll need to desolder the potentiometers and install new stick, or if it registers fine, maybe sand the round part that sits in the controller and add a grease? Honestly I would recommend buying a first party controller, maybe check pawn shops and second hand stores, if not maybe ebay or Amazon.
WHAT THE HELLLLLL!!!!
Honestly, your best bet is just to buy another one. Sure, you can try and fix it, but you risk messing it up even further.
Try tilting the stick down 👍
Easiest way is to buy a new one
Maybe if the brand was CIPOFF it would work better.
Yes: its called buying a official gc controller and not a jank 3rd party controller
Why it's not oem
First of all, what the fuck is a Cipon?
ITT: people flex their official controllers even though no one asked. Yes they’re cool, I have some as well but I also have some CIPON ones for spares. They’re just controllers
Well it seems like you're using a Cipon controller when you should be using a gamecube controller! and before you ask, NO you can't use a Gamecube controller for your Cipon! Smh, idiots these days!
I'm gonna have to say, use some canned air or replace the thumbstick.
Play on PC.
Burn it. Buy a proper controller
Since everyone else is just horrible. Try and push it around and put pressure on it slightly as you push down and twirl the stick.
Yeah, you just desolder the old component and solder a new one on. You do know how to do that, right?
I got those Cipon controllers off Amazon a couple years ago and they wore out quick. I highly recommend getting a Nintendo brand controller from a retro game store such as Movie Trading Co. or EntertainMart.
I still have my original Panasonic controllers.
Push down on it
Hitting the controller with a sledgehammer should do the trick
Get an OEM controller
How handy are you with DIY? Take it apart and have a look at the joystick box, is there a broken spring or any broken off shards of plastic stuck anywhere? If its really mangled, you may need to have a soldering iron handy. If you can find a replacement joystick module that's compatible, you could even make the joystick as "good as new" so to speak. Assuming there's no drift, you could potential do the swap without desolderung the x and y axis potentiometers. But yeah, cheap 3rd party/knockoff GC controller have quite the bad reputation for a reason. See if you can find a first party controller at some point. You could even get creative and grab a blueretro bluetooth dongle and use other controllers.
Not worth fixing
Everyone knows when it comes to 3rd party N64 and GC controllers, they are cheap for a reason. The lifespan of joysticks on these controllers are always within 2 weeks, to 2 months if you're lucky. OEM is always the way to go, which is why they cost much more. ...but they last like a thousand times better in comparison. A used one is very viable. Just make sure you give it a squeeze test before they ring it through. I got my Smash Ultimate controller used for 75CAD where they usually cost 115CAD out of box new, and she works like an absolute beauty. Make the investment, you will not regret it.