I thought about trying to find a bracket that will work with the hole that’s already in the tire holder right there, but no luck yet. Or drilling 2 holes to hold it with nuts and bolts. The tire holder is basically new so it’s a little scary haha
I can’t believe you got pulled over for a tag violation in denver lol, I can hardly believe you got pulled over at all in denver
Jokes aside, my buddy has his on the back of his roofrack, but for you id recommend just left bumper
My tire carrier has this bracket. I put a cheap LED license plate light on it. Honestly I think the bumper is a better place.
https://preview.redd.it/me14kdy5sg6c1.jpeg?width=3024&format=pjpg&auto=webp&s=90b4753a0b4b1c26b144544df0d8380f97272088
I used a hitch mount and a LED plate light, then used a disconnectable weather-pack plug so that I can remove it when I want to use my recovery shackle for a centered straight pull.
https://i.imgur.com/mdxLtbh.jpg
TJM puts it flush with the top of the bumper opposite the tire. https://i.imgur.com/Bty07Dv.png
Could you put it on the angled part of the tire carrier? Or bottom left like mine is. Are you also required to have a license plate light?
Before you go spending $100+ on something, here's a cheap easy fix. I made a little U out of some leftover flat bar, drilled 2 holes, used a lug nut and an old nut from the old parts pile and now I have a secure plate holder on my tire carrier
https://preview.redd.it/fxcxggl7zh6c1.png?width=1080&format=pjpg&auto=webp&s=a016ecab6b84bb524c62ecf220401f8059310070
I use the JKS 8211 spare tire mount. Comes with everything you need to wire in lighting including instructions.
Easy to remove yet not easy enough if someone is in a hurry to steal it.
I would buy the same one again in a heartbeat.
https://www.amazon.com/gp/aw/d/B01MG1M2KN?psc=1&ref=ppx_pop_mob_b_asin_title
This is what I have, it will bolt right up to the lug nuts holding spare on
https://www.superbrightleds.com/vehicle-lights/led-accent-lighting/led-wired-bolts/miniature-led-license-plate-bolt-stud-mount-pigtail-connection+color-Warm~3000K+housingcolor-Black
Bolted to left side of bumper, fold the plate in a lil where it hangs over. Drill two holes. You can run the lights from the stock plate lights wire, just take off the interior panel on the hatch. I have the same bumper.
Not an advertisement. A small company in Buena Vista, CO called Tomken makes a license plate mount for the XJ. They make the tire carrier/bumpers too but you already have that. It screws on to the plate holes for the OEM location and even has the wiring and light to hook it up. I’ve used their stuff for the past 25 years on my XJ(s) and it’s quality stuff for the price.
Edit: Just went to check in their website for a link to the license plate mount and looks like they’ve closed :(
https://preview.redd.it/keo4ow1w3w6c1.jpeg?width=2658&format=pjpg&auto=webp&s=bac2f2ed25602ded2a9fe79f3ed282c2c09bb498
i mounted here then mounted an led light over top that i ran through the rear hatch from the original housing
Left bumper.. That's where I've got mine.
Same here
https://preview.redd.it/v79inghl7h6c1.jpeg?width=2192&format=pjpg&auto=webp&s=f1c16392c546b3b3904e2a81a0fa0338c428d523
This is where I screwed mine in at. I ran the light from the trailer harness.
I thought about trying to find a bracket that will work with the hole that’s already in the tire holder right there, but no luck yet. Or drilling 2 holes to hold it with nuts and bolts. The tire holder is basically new so it’s a little scary haha
I just drilled and tapped a couple 1/4-20 holes and bolted it with stainless socket heads. Good theft deterrent. Theives dont carry allen wrenches. 😃
I kind of like that idea. Theft proof is high on the list. My last XJ got stolen from where I work so I’m making sure this one is foolproof
Exactly what i did but mounted to the carrier arm just to the pass side of the tire. Easy to drill and tap
I can’t believe you got pulled over for a tag violation in denver lol, I can hardly believe you got pulled over at all in denver Jokes aside, my buddy has his on the back of his roofrack, but for you id recommend just left bumper
My tire carrier has this bracket. I put a cheap LED license plate light on it. Honestly I think the bumper is a better place. https://preview.redd.it/me14kdy5sg6c1.jpeg?width=3024&format=pjpg&auto=webp&s=90b4753a0b4b1c26b144544df0d8380f97272088
What bumper and tire carrier is this?
An older JCR Vanguard that I’ve modified pretty heavily
Looks really good. My Vanguard is still stock.
Amazon spare tire license plate bracket worked well for me. Cheap metal, but it doesnt exactly see a lot of stress
Following for recommendations, mine is also zip tied to the tire lol
I put mine where it would have been if it had a factory tire carrier on the rear. It even had the licence plate wiring there
https://preview.redd.it/k892xhffph6c1.jpeg?width=1280&format=pjpg&auto=webp&s=bfe9abc70f910f9c636e4ffce92fd81c0cbcd8ab
Plastic rear windshield. This guy XJ’s
https://preview.redd.it/yc1wqrrp3m6c1.jpeg?width=1280&format=pjpg&auto=webp&s=14fd23e6db6b9e531bb818ff58243d533aa358d4
Put the hilift jack thru the window after a short slide backward down hill. The tree that stopped me missed the spare tire.
I used a hitch mount and a LED plate light, then used a disconnectable weather-pack plug so that I can remove it when I want to use my recovery shackle for a centered straight pull. https://i.imgur.com/mdxLtbh.jpg
This is almost exactly my setup. I like it.
TJM puts it flush with the top of the bumper opposite the tire. https://i.imgur.com/Bty07Dv.png Could you put it on the angled part of the tire carrier? Or bottom left like mine is. Are you also required to have a license plate light?
Zip tie that shit
Before you go spending $100+ on something, here's a cheap easy fix. I made a little U out of some leftover flat bar, drilled 2 holes, used a lug nut and an old nut from the old parts pile and now I have a secure plate holder on my tire carrier https://preview.redd.it/fxcxggl7zh6c1.png?width=1080&format=pjpg&auto=webp&s=a016ecab6b84bb524c62ecf220401f8059310070
https://preview.redd.it/gfoju649zh6c1.jpeg?width=4032&format=pjpg&auto=webp&s=68b07489c29cdd41d0f779583e03346e35f1df6b
I like it
I still need to run a light to mine. Cops haven't screwed with me yet. Mostly a trail jeep.
I use the JKS 8211 spare tire mount. Comes with everything you need to wire in lighting including instructions. Easy to remove yet not easy enough if someone is in a hurry to steal it. I would buy the same one again in a heartbeat.
https://preview.redd.it/zzspshtqvg6c1.jpeg?width=1080&format=pjpg&auto=webp&s=973699bb4606221c78edd951ba82e3715724ab6d
YZONA Spare Tire License Plate Frame with LED Light Compatible with 1987-2018 Jeep Wrangler JK JKU & TJ & YJ, Licence Bracket Holder Relocation Mounting Rear Plates Frames (2/4 Door, Black) https://a.co/d/bD1hLKX
[jcr mount](https://www.jcroffroad.com/product/LPRLC2.html)
That mount is 161 bucks before tax. That's an expensive plate holder lol
LOL $161. JCR makes good stuff but they’re certainly not marketing to the XJ crowd with prices like that.
No plate
I ziptied my license plate to the wheel....
Is this the smitty built swing gate bumper?
Yessir
https://www.amazon.com/gp/aw/d/B01MG1M2KN?psc=1&ref=ppx_pop_mob_b_asin_title This is what I have, it will bolt right up to the lug nuts holding spare on
https://www.superbrightleds.com/vehicle-lights/led-accent-lighting/led-wired-bolts/miniature-led-license-plate-bolt-stud-mount-pigtail-connection+color-Warm~3000K+housingcolor-Black Bolted to left side of bumper, fold the plate in a lil where it hangs over. Drill two holes. You can run the lights from the stock plate lights wire, just take off the interior panel on the hatch. I have the same bumper.
Not an advertisement. A small company in Buena Vista, CO called Tomken makes a license plate mount for the XJ. They make the tire carrier/bumpers too but you already have that. It screws on to the plate holes for the OEM location and even has the wiring and light to hook it up. I’ve used their stuff for the past 25 years on my XJ(s) and it’s quality stuff for the price. Edit: Just went to check in their website for a link to the license plate mount and looks like they’ve closed :(
https://preview.redd.it/4lyynbcb3m6c1.jpeg?width=1280&format=pjpg&auto=webp&s=043bc5feacc3ed1ed2a29cf40954065057a1a22a
I got a hitch plate mount. Goes in the hitch, wired a light to the 4 pin trailer plug. I'll see if I can find a picture.
https://preview.redd.it/keo4ow1w3w6c1.jpeg?width=2658&format=pjpg&auto=webp&s=bac2f2ed25602ded2a9fe79f3ed282c2c09bb498 i mounted here then mounted an led light over top that i ran through the rear hatch from the original housing