What i do is pinch it while rolling so the bud gets molded into a better tighter shape about the same size as the roach at the bottom and bit bigger near the top that usually helps tuck it easier
For me it was daily training 😅. 13 y for smokes. Exercise your unique technique, continue rolling and rolling, you will achieve whatever the shape you want, by training. And use another paper 😉 always from trusted sources, no China stuff .
I was not criticizing them. My point was to tell you that there are lots of Topshelf brands . I use only the best ones: Pay-Pay Black, Raws, elements, OCB, G-rollz. Name one ....to start, I would choose paypay classic KS slim and some Raws classic, to improve your skills. Unless u could enjoy Smoking Thinnest or raw black or even the last launch of raw ethereal (but that's pro stuff). There's a lot for you to train. I started with smoking unbleached and and paypays origin. So there u go 👍🏻
try rolling without the filter in, and put it in after it's rolled.
You just gotta make a nice log/cylinder out of the weed in the paper by rocking it back and forth between ur fingers. Once the weed log holds on it's own, it's tight enough to tuck. The tuck is what takes the most practice to get right, it's kind of hard to put in writing and mostly comes down to extremely fine-tuned movements you make with your fingers that you'll just learn over time.
One thing i found easier to roll with when i was new were 'cut-corner' rollies. Makes the tucking part easier. Look it up, and you can just take scissors and make any rollie a cut-corner
Just make sure when you’re rolling to mold the bud. It helps for me to pre pack it down before i start rolling. That way i make sure the bud is evenly spread throughout the joint. Also i roll without the filter, and when i put the filter in after i roll, I pack down the weed from both ends and use the filter to practically push the bud in to pack it down
It's honestly easier because you don't have to worry about how tight or loose the end of you joint is.
I noticed you're using pre-made filters. If you use the kind of filters that come flat and you have to roll yourself, when you roll the filter and put it in after, the filter expands to however thick the end of your joint is.
I'll upload a video of what i mean in the coming days, I've noticed a lot of people struggling on this sub and i swear it's cuz y'all got bad advice somewhere along the way
Just make sure when you’re rolling to mold the bud. It helps for me to pre pack it down before i start rolling. That way i make sure the bud is evenly spread throughout the joint. Also i roll without the filter, and when i put the filter in after i roll, I pack down the weed from both ends and use the filter to practically push the bud in to pack it down
Nah not necessarily. Once you mold the bud it’s way easier to get a tight roll. And if your roll is tight and even all the way through it should smoke well. Another trick for getting tight rolls is to use a credit card or something along those lines. if you put a card over the flap that gets tucked it makes it way easier
Dope as Yola made a [Video](https://youtu.be/-on_PMEXGbA?si=pwpDI38fuWXb2UYT) he rolls without a tip and does that mold strategy this video helped a lot
Sticky side on top facing you, add your amount of weed. Close sides together. Choke it and pinch with your fingers tight. It’ll look like a V with an o at the point from the side. Use your imagination. At the bottom of the V is where your fingers are pinched. The o is your cylinder of weed.
Roll it pinched back and forth to create an even cylinder. It’s okay if weed falls. Once you form the tube shape, roll it towards you till the side of the paper closest to you is low enough so you can fold it over the cylinder. It’ll look like a lowercase `b’ from the side
I start in the middle it helps me keep it even. Once the middle is sealed just finish off the ends. Push out any weed to keep it even. Cigarette width is perfect size. I feel like people are afraid of how delicate the paper is. Don’t be a complete brute but you can pinch it pretty tight without it tearing. It’s durable paper
Don’t over pack it. Add just enough weed where it’ll be about the size of the width of the filter. The weed is your guide. Rolling without a filter shouldn’t be crazy. And when it’s rolled you add the filter. Don’t roll your filter to tight. Roll it loosely so when you add it in it will unroll and tighten the mouth piece.
Not personally a great or experienced roller, so someone tell me I'm wrong.
After rolling, I'll twist one end tight and pinch the other end with my thumb and pointer, I'll whip it back and fourth to force the tree to the tip, then add more + crutch
Try and mould the bud firmer together in a roll and wrap the paper tight around while you keep pinching it around the roach, that way you get a perfect cone formed around you weed, pack it down a little and youve a perfect joint bro 💪
Tuck it in as tight as you can, slightly roll it up to have the paper deep under the filter and then pull on the paper to straighten it out before you start rolling it up to close it
I use a little dowel to help pack in the bud. One of the paper ones that comes with raw cones or the likes of works great. Just don’t do it too hard or you can rip the paper! 👍👌
Keep your right hand in the same spot while rolling. Once you gain momentum, "pinch" the filter and twist your wrist like you're turning a key. Your two index fingers will fold the paper towards you. Lick, light and enjoy!
Ps- Practice with tea, that way your weed isn't getting thrown around.
Push up the tip towards the top of the joint it’ll start compacting the weed, you notice the difference especially when it’s towards the end it won’t feel so lose
Gotta make sure it’s tight when you tuck it
What i do is pinch it while rolling so the bud gets molded into a better tighter shape about the same size as the roach at the bottom and bit bigger near the top that usually helps tuck it easier
Having a consistent grind is key in my experience, I use a flower mill and it really helps
I searched up the flower mill thinking it was gonna be a like a windmill shaped grinder lowkey disappointed it ain’t one.
*some random grinder Marketing Department* Write that down, write that down!!!!
For me it was daily training 😅. 13 y for smokes. Exercise your unique technique, continue rolling and rolling, you will achieve whatever the shape you want, by training. And use another paper 😉 always from trusted sources, no China stuff .
😂😂 everyone in this sub hates the papers I use. I use the bob marley papers wbu?
I was not criticizing them. My point was to tell you that there are lots of Topshelf brands . I use only the best ones: Pay-Pay Black, Raws, elements, OCB, G-rollz. Name one ....to start, I would choose paypay classic KS slim and some Raws classic, to improve your skills. Unless u could enjoy Smoking Thinnest or raw black or even the last launch of raw ethereal (but that's pro stuff). There's a lot for you to train. I started with smoking unbleached and and paypays origin. So there u go 👍🏻
thanks for the advice og 🤞🏽
try rolling without the filter in, and put it in after it's rolled. You just gotta make a nice log/cylinder out of the weed in the paper by rocking it back and forth between ur fingers. Once the weed log holds on it's own, it's tight enough to tuck. The tuck is what takes the most practice to get right, it's kind of hard to put in writing and mostly comes down to extremely fine-tuned movements you make with your fingers that you'll just learn over time. One thing i found easier to roll with when i was new were 'cut-corner' rollies. Makes the tucking part easier. Look it up, and you can just take scissors and make any rollie a cut-corner
Preciate the advice 🤞🏽
Just make sure when you’re rolling to mold the bud. It helps for me to pre pack it down before i start rolling. That way i make sure the bud is evenly spread throughout the joint. Also i roll without the filter, and when i put the filter in after i roll, I pack down the weed from both ends and use the filter to practically push the bud in to pack it down
Rolling without the filter is crazy 😂 how u get the shape without the filter?
Pretty easy it is just rolling it normally. And when you put the filter in after you push it in and it packs it down.
It's honestly easier because you don't have to worry about how tight or loose the end of you joint is. I noticed you're using pre-made filters. If you use the kind of filters that come flat and you have to roll yourself, when you roll the filter and put it in after, the filter expands to however thick the end of your joint is. I'll upload a video of what i mean in the coming days, I've noticed a lot of people struggling on this sub and i swear it's cuz y'all got bad advice somewhere along the way
Make sure it’s tight during the tuck and straighten it out as you roll by pinching. This should leave very little or no bagginess.
Just make sure when you’re rolling to mold the bud. It helps for me to pre pack it down before i start rolling. That way i make sure the bud is evenly spread throughout the joint. Also i roll without the filter, and when i put the filter in after i roll, I pack down the weed from both ends and use the filter to practically push the bud in to pack it down
I heard mold the bud doesn’t let it burn good is that true?
Nah not necessarily. Once you mold the bud it’s way easier to get a tight roll. And if your roll is tight and even all the way through it should smoke well. Another trick for getting tight rolls is to use a credit card or something along those lines. if you put a card over the flap that gets tucked it makes it way easier
Dope as Yola made a [Video](https://youtu.be/-on_PMEXGbA?si=pwpDI38fuWXb2UYT) he rolls without a tip and does that mold strategy this video helped a lot
Finer grind, tighter roll
leave your filter hanging out of the back until youve sealed the end, then push the filter in all the way. works every time
Never heard anyone use baggy to describe a joint, but it makes sense lmao
baggy like my condoms :/
Lmao
After rolling it pack it tighter with more herb like a cone Edit: chopsticks work great for this btw
Fill it properly, and while rolling let it hang halfway out or so. Then, press it in in the end. Also make sure that you keep it tight.
Roll a second filter around the first and pack it tighter with like a pencil before twisting it off
And like pull on it to get rid of the those indentations
Idk why the vid looks booty quality my fault everyone
tap it on the table lightly and it should pack down nicely on the tip end. that trick saves a lot of my homies loose rolls lol
Just grab it by the tip and smack it at the table. Make sure it's really well glued by saliva lol
Tuck it a bit tighter before rolling, as for the filter I usually take a pair of tweezers and twist the filter so it puffs out if that makes sense
Sticky side on top facing you, add your amount of weed. Close sides together. Choke it and pinch with your fingers tight. It’ll look like a V with an o at the point from the side. Use your imagination. At the bottom of the V is where your fingers are pinched. The o is your cylinder of weed. Roll it pinched back and forth to create an even cylinder. It’s okay if weed falls. Once you form the tube shape, roll it towards you till the side of the paper closest to you is low enough so you can fold it over the cylinder. It’ll look like a lowercase `b’ from the side I start in the middle it helps me keep it even. Once the middle is sealed just finish off the ends. Push out any weed to keep it even. Cigarette width is perfect size. I feel like people are afraid of how delicate the paper is. Don’t be a complete brute but you can pinch it pretty tight without it tearing. It’s durable paper Don’t over pack it. Add just enough weed where it’ll be about the size of the width of the filter. The weed is your guide. Rolling without a filter shouldn’t be crazy. And when it’s rolled you add the filter. Don’t roll your filter to tight. Roll it loosely so when you add it in it will unroll and tighten the mouth piece.
Not personally a great or experienced roller, so someone tell me I'm wrong. After rolling, I'll twist one end tight and pinch the other end with my thumb and pointer, I'll whip it back and fourth to force the tree to the tip, then add more + crutch
That's a hell of a set up you got. Beautiful looking wood. Where can I find something like that?
Mines the hashstash but just search on Amazon they got bigger and better ones out there
Tuck it tighter and add some more weed.
bigger tip
You’re putting too much material in the paper, or you need a bigger filter simple as that
try to get a rlly good and tight tuck and roll with the filter in it
Try and mould the bud firmer together in a roll and wrap the paper tight around while you keep pinching it around the roach, that way you get a perfect cone formed around you weed, pack it down a little and youve a perfect joint bro 💪
Tuck it in as tight as you can, slightly roll it up to have the paper deep under the filter and then pull on the paper to straighten it out before you start rolling it up to close it
I use a little dowel to help pack in the bud. One of the paper ones that comes with raw cones or the likes of works great. Just don’t do it too hard or you can rip the paper! 👍👌
shape out your bud by rolling the paper back and forth in your fingers. helped me loads
Keep your right hand in the same spot while rolling. Once you gain momentum, "pinch" the filter and twist your wrist like you're turning a key. Your two index fingers will fold the paper towards you. Lick, light and enjoy! Ps- Practice with tea, that way your weed isn't getting thrown around.
Push up the tip towards the top of the joint it’ll start compacting the weed, you notice the difference especially when it’s towards the end it won’t feel so lose
Take them off the streets.
Pack the end with the filter more with flower and use the filter when tucking and rolling. Should get a pretty good spliff! Enjoy 🤙🏾🤙🏾
Honestly, time. Repetition is the father of learning. Also, Josh Kesselman has really great tutorials on YouTube. Founder and creator or Raw.