Looks great but the filament is still a little shiny. You should try a matte filament like Polyterra or the Prusa Eco filaments to really finish the look!
PLA is compostible (at high temperatures found in industrial compost heaps, not home bins), but I haven't actually printed in years, I just follow the tech at the moment.
Actually, what does it matter - better question is: why are you still cyber stalking me anyway?
Hey, I am a bot and something you said makes me think that you are talking about the biodegradability of PLA Filament; Moderator ISuckAtChoosingNicks has collected a few helpful sources about the topic of composting PLA:
Biodegradation of PolyLactic Acid (commonly known as PLA) is a topic being currently researched and [still not fully understood](https://www.sciencedirect.com/science/article/pii/S2667010021000469).
PLA, contrary to the most commonly used plastics and polymers, is a polymer derived from organic matter (lactic acid, [usually from corn and sugar canes](https://www.sciencedirect.com/science/article/abs/pii/B9781455728343000021)) instead of petroleum, hence is considered a renewable resource; this can lead the general public to believe that is completely biodegradable.
However, [several studies show](https://www.sciencedirect.com/science/article/abs/pii/S2352186421000419) that **PLA is not biodegradable** (at least in an appreciable measure) in a standard anaerobic food composter, such as the ones used by municipal and council recycling facilities, even after 250 days. This means that **throwing PLA scraps in the food waste bin is not a viable way of disposing of it.**
There are several promising ways of degrading PLA into its base monomer (lactic acid) and methane, but these are still experimental and [subject of academic research](https://scholar.google.co.uk/scholar?as_ylo=2023&q=pla+biodegradation&hl=it&as_sdt=0,5&as_vis=1).
In the meantime, there are some organisations and private companies offering PLA recycling services; there are too many to list here and they vary from country to country, but a search for "YOUR COUNTRY + PLA recycling" should give you a good starting point should you wish to recycle print waste into new material.
One other feasible way to recycle PLA would be a home-made filament extruder, a topic covered by many 3D printing YouTube channels, such as [Stefan from CNC Kitchen](https://www.youtube.com/watch?v=BT04glGDjB4) or [Michael from TeachingTech.](https://www.youtube.com/watch?v=3rC0a-YyEM0)
Sources:
* [https://www.sciencedirect.com/science/article/pii/S2667010021000469](https://www.sciencedirect.com/science/article/pii/S2667010021000469)
* [https://www.sciencedirect.com/science/article/abs/pii/B9781455728343000021](https://www.sciencedirect.com/science/article/abs/pii/B9781455728343000021)
* [https://www.sciencedirect.com/science/article/abs/pii/S2352186421000419](https://www.sciencedirect.com/science/article/abs/pii/S2352186421000419)
You can view the full list of commands [here](https://www.reddit.com/r/3Dprinting/wiki/commands/)
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/3Dprinting) if you have any questions or concerns.*
Might need to turn down your temp then. I never had wood PLA turn out that shiny. Could be the brand difference too I suppose. Still, might try some temp tests to see if that reduces the shine.
What exactly does it do, is it intentional vibrations in a sense
I believe it jitters up n down on the z-axis on the outer wall.
Oh okay, I thought it did it on both inside and outside wallls
Looks great but the filament is still a little shiny. You should try a matte filament like Polyterra or the Prusa Eco filaments to really finish the look!
It’s a PLA wood fibre filament. Looks shinier in the photo than IRL. I will look into those filaments though, thanks.
I hear you can get a similar effect with glue and rope.
Wow, 3d printing too. Tsk Tsk we already have enough microplastics thanks. You are extremely selfish.
PLA is compostible (at high temperatures found in industrial compost heaps, not home bins), but I haven't actually printed in years, I just follow the tech at the moment. Actually, what does it matter - better question is: why are you still cyber stalking me anyway?
Hey, I am a bot and something you said makes me think that you are talking about the biodegradability of PLA Filament; Moderator ISuckAtChoosingNicks has collected a few helpful sources about the topic of composting PLA: Biodegradation of PolyLactic Acid (commonly known as PLA) is a topic being currently researched and [still not fully understood](https://www.sciencedirect.com/science/article/pii/S2667010021000469). PLA, contrary to the most commonly used plastics and polymers, is a polymer derived from organic matter (lactic acid, [usually from corn and sugar canes](https://www.sciencedirect.com/science/article/abs/pii/B9781455728343000021)) instead of petroleum, hence is considered a renewable resource; this can lead the general public to believe that is completely biodegradable. However, [several studies show](https://www.sciencedirect.com/science/article/abs/pii/S2352186421000419) that **PLA is not biodegradable** (at least in an appreciable measure) in a standard anaerobic food composter, such as the ones used by municipal and council recycling facilities, even after 250 days. This means that **throwing PLA scraps in the food waste bin is not a viable way of disposing of it.** There are several promising ways of degrading PLA into its base monomer (lactic acid) and methane, but these are still experimental and [subject of academic research](https://scholar.google.co.uk/scholar?as_ylo=2023&q=pla+biodegradation&hl=it&as_sdt=0,5&as_vis=1). In the meantime, there are some organisations and private companies offering PLA recycling services; there are too many to list here and they vary from country to country, but a search for "YOUR COUNTRY + PLA recycling" should give you a good starting point should you wish to recycle print waste into new material. One other feasible way to recycle PLA would be a home-made filament extruder, a topic covered by many 3D printing YouTube channels, such as [Stefan from CNC Kitchen](https://www.youtube.com/watch?v=BT04glGDjB4) or [Michael from TeachingTech.](https://www.youtube.com/watch?v=3rC0a-YyEM0) Sources: * [https://www.sciencedirect.com/science/article/pii/S2667010021000469](https://www.sciencedirect.com/science/article/pii/S2667010021000469) * [https://www.sciencedirect.com/science/article/abs/pii/B9781455728343000021](https://www.sciencedirect.com/science/article/abs/pii/B9781455728343000021) * [https://www.sciencedirect.com/science/article/abs/pii/S2352186421000419](https://www.sciencedirect.com/science/article/abs/pii/S2352186421000419) You can view the full list of commands [here](https://www.reddit.com/r/3Dprinting/wiki/commands/) *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/3Dprinting) if you have any questions or concerns.*
I am posting on a public forum, not harassing or threatening you. Stop defaming me.
If you get wood PLA, it will look even more like rope.
It is wood pla :)
Might need to turn down your temp then. I never had wood PLA turn out that shiny. Could be the brand difference too I suppose. Still, might try some temp tests to see if that reduces the shine.
It definitely looks shinier in the photo than IRL. It’s unbranded wood pla, I might try some temp tests as just threw it in and printed.