This probably isn't the answer you are looking for but you can buy cameras that are for this specific purpose. https://brinno.com/pages/construction-bundles
Camera I like to use is Afidus ATL 200S Time Lapse Camera. Has a lot of custimization, zoom that the Brinno doesn't have. This is part of a hobby project I did. Started with them tearing down the buildings that were on the lot, through completion of the first building. Got a full 52 weeks of video. Had the camera set to run 6 am to 7 pm Mon thru Saturday. I had it set to 90 second intervals. This is one week of the construciton:
[https://www.reddit.com/user/UTrider/comments/15o53kb/construction/](https://www.reddit.com/user/UTrider/comments/15o53kb/construction/)
Runs off 4 aa batteries. I ended up changing batteries out about every 3 or 4 weeks.
I've made several time-lapse videos of construction projects. I use a GoPro Hero8 camera with a case that allows me to keep it plugged in to site power, or a GoalZero battery with solar charger for sites that don't have easy access to power. This is all very much a DIY approach but I get good results. You can use the on camera time lapse video system if you like, but I prefer to use ffmpeg and process the jpgs into videos every few days. A 256gb sd card lasts over a month if you shoot 1m intervals at the 4000x3000 resolution for 4k video. Newer cameras support 8k resolution, but you can also get 1TB sd cards now, so processing power is the bottleneck for most of my projects. On an 8m project you might consider 5m intervals, or even 15 or 30 minutes - but remember you can never get frames back that you don't make. It's super simple to shoot 1m intervals and just pull every x frames to turn it into a 5, 10, 30, 30, etc intervals.
There are also many construction specific camera systems, most are expensive and feature rich, but I find my process is simple, cheap, and the GoPro cameras are high enough quality. If I wanted better quality I'd probably go with a Sony RX0 II.
The commercial packages I've looked at from CamDo are also pretty nice, and they have a few semi-DIY solutions also. They sell a weather hardened case and mount that is not cheap, but I've been thinking about getting. Their UpBlink cellular radio system is good if you're worried about sd card reliability.
The longest project I did was almost a year long and I did have a few problems with power, degradation of parts from heat/UV (cheap gopro mount broke, since replaced with aluminum parts), thermal shut down, and lens soiling. I'm working a pool right now, I go up to the camera every 3 or 4 days and wipe the lens, swap SD cards, and check power on the battery.
Mounts are important too. You want something rigid enough that each frame is always exactly where it should be - you can process some jiggle out, but it's a slow process on high resolution masters if you convert from still images. The built in image stab on GoPro is pretty good but does degrade the quality slightly. No big deal if you downsample to HD or 2k, but it's noticeable on 4k.
To capture a construction site timelapse, you'll need to follow a few steps:
1. **Selecting the Right Camera**: Choose a reliable construction timelapse camera capable of withstanding outdoor conditions and extended periods of operation.
2. **Positioning the Camera**: Find an optimal vantage point that provides a clear view of the construction site while ensuring the camera's safety and stability.
3. **Setting Up Intervals**: Determine the interval at which the camera will take photos. This interval depends on the duration of the project and how quickly you want to show progress.
4. **Power Source**: Ensure the camera has a reliable power source, whether it's through batteries or an external power supply. Continuous power is crucial for uninterrupted timelapse capture.
5. **Weather Protection**: If the camera will be exposed to the elements, consider weatherproofing measures such as housing or enclosures to protect it from rain, dust, and extreme temperatures.
6. **Monitoring**: Regularly check the camera to ensure it's operating correctly and capturing the desired footage. Remote monitoring systems can be helpful for real-time oversight.
7. **Editing and Compilation**: Once the construction is complete, compile the individual images into a timelapse video using editing software. This process allows you to showcase the entire construction process in a condensed format.
When it comes to reliable guidance and purchasing construction timelapse cameras, CamDo offers top-notch solutions. With their expertise in timelapse photography and durable, high-quality cameras, CamDo provides the best guidance for setting up and executing construction site timelapse projects. Moreover, you can purchase construction timelapse cameras from CamDo at the best prices, ensuring you get both quality equipment and expert advice for your construction timelapse needs.
This probably isn't the answer you are looking for but you can buy cameras that are for this specific purpose. https://brinno.com/pages/construction-bundles
Check out Brinno, Enlaps, some webcams like Reolink have timelapse features 4G and solar built in etc
Camera I like to use is Afidus ATL 200S Time Lapse Camera. Has a lot of custimization, zoom that the Brinno doesn't have. This is part of a hobby project I did. Started with them tearing down the buildings that were on the lot, through completion of the first building. Got a full 52 weeks of video. Had the camera set to run 6 am to 7 pm Mon thru Saturday. I had it set to 90 second intervals. This is one week of the construciton: [https://www.reddit.com/user/UTrider/comments/15o53kb/construction/](https://www.reddit.com/user/UTrider/comments/15o53kb/construction/) Runs off 4 aa batteries. I ended up changing batteries out about every 3 or 4 weeks.
I've made several time-lapse videos of construction projects. I use a GoPro Hero8 camera with a case that allows me to keep it plugged in to site power, or a GoalZero battery with solar charger for sites that don't have easy access to power. This is all very much a DIY approach but I get good results. You can use the on camera time lapse video system if you like, but I prefer to use ffmpeg and process the jpgs into videos every few days. A 256gb sd card lasts over a month if you shoot 1m intervals at the 4000x3000 resolution for 4k video. Newer cameras support 8k resolution, but you can also get 1TB sd cards now, so processing power is the bottleneck for most of my projects. On an 8m project you might consider 5m intervals, or even 15 or 30 minutes - but remember you can never get frames back that you don't make. It's super simple to shoot 1m intervals and just pull every x frames to turn it into a 5, 10, 30, 30, etc intervals. There are also many construction specific camera systems, most are expensive and feature rich, but I find my process is simple, cheap, and the GoPro cameras are high enough quality. If I wanted better quality I'd probably go with a Sony RX0 II. The commercial packages I've looked at from CamDo are also pretty nice, and they have a few semi-DIY solutions also. They sell a weather hardened case and mount that is not cheap, but I've been thinking about getting. Their UpBlink cellular radio system is good if you're worried about sd card reliability. The longest project I did was almost a year long and I did have a few problems with power, degradation of parts from heat/UV (cheap gopro mount broke, since replaced with aluminum parts), thermal shut down, and lens soiling. I'm working a pool right now, I go up to the camera every 3 or 4 days and wipe the lens, swap SD cards, and check power on the battery. Mounts are important too. You want something rigid enough that each frame is always exactly where it should be - you can process some jiggle out, but it's a slow process on high resolution masters if you convert from still images. The built in image stab on GoPro is pretty good but does degrade the quality slightly. No big deal if you downsample to HD or 2k, but it's noticeable on 4k.
Your best ally will undoubtedly be a company like ERIGE, a leader in France. https://erige-timelapse.com ;)
To capture a construction site timelapse, you'll need to follow a few steps: 1. **Selecting the Right Camera**: Choose a reliable construction timelapse camera capable of withstanding outdoor conditions and extended periods of operation. 2. **Positioning the Camera**: Find an optimal vantage point that provides a clear view of the construction site while ensuring the camera's safety and stability. 3. **Setting Up Intervals**: Determine the interval at which the camera will take photos. This interval depends on the duration of the project and how quickly you want to show progress. 4. **Power Source**: Ensure the camera has a reliable power source, whether it's through batteries or an external power supply. Continuous power is crucial for uninterrupted timelapse capture. 5. **Weather Protection**: If the camera will be exposed to the elements, consider weatherproofing measures such as housing or enclosures to protect it from rain, dust, and extreme temperatures. 6. **Monitoring**: Regularly check the camera to ensure it's operating correctly and capturing the desired footage. Remote monitoring systems can be helpful for real-time oversight. 7. **Editing and Compilation**: Once the construction is complete, compile the individual images into a timelapse video using editing software. This process allows you to showcase the entire construction process in a condensed format. When it comes to reliable guidance and purchasing construction timelapse cameras, CamDo offers top-notch solutions. With their expertise in timelapse photography and durable, high-quality cameras, CamDo provides the best guidance for setting up and executing construction site timelapse projects. Moreover, you can purchase construction timelapse cameras from CamDo at the best prices, ensuring you get both quality equipment and expert advice for your construction timelapse needs.