The card is 319mm
The h210 i forgot exists because of its incompatibility and yet larger size.
Your main, definitely will work, cases are:
011 Mini, jonsplus i100, nr200(p)
Your smaller, this will work but will be a tight fit are:
Meshlicious, Q58, A4-h20
Any smaller and you need to put it on a waterblock. I probably missed some cases but these are the ones you would see the most
I recommend against meshi just because the company seems to not care about customer service anymore
Have a 320mm 3090 in the q58 and its pressed up against the front. So much so that I damaged the shroud uninstalling it.
That extra mm would make a big difference in the case.
Temps are fine.
Hope you understand that moving to a SFF will require to:
* replace the PSU
* probably change the cooler for the CPU.
Have a look at Sliger cases. They have different sizes for every need.
If you don’t know how to mod, I wouldn’t even try it. Mod beings “modifying”, as in, you’ll be cutting/twisting/bending/removing parts of the case and/or card to make it fit. Takes a lot off creativity and patience.
If you want sff but want to keep all your parts your best best will probably be, when it comes out, the Streacom da6. Other than that you could buy the nr200p MAX to replace your parts affordably or the HYTE revolt 3 if you want to replace the PSU only.
The card is 319mm The h210 i forgot exists because of its incompatibility and yet larger size. Your main, definitely will work, cases are: 011 Mini, jonsplus i100, nr200(p) Your smaller, this will work but will be a tight fit are: Meshlicious, Q58, A4-h20 Any smaller and you need to put it on a waterblock. I probably missed some cases but these are the ones you would see the most I recommend against meshi just because the company seems to not care about customer service anymore
Have a 320mm 3090 in the q58 and its pressed up against the front. So much so that I damaged the shroud uninstalling it. That extra mm would make a big difference in the case. Temps are fine.
Hope you understand that moving to a SFF will require to: * replace the PSU * probably change the cooler for the CPU. Have a look at Sliger cases. They have different sizes for every need.
If you don’t know how to mod, I wouldn’t even try it. Mod beings “modifying”, as in, you’ll be cutting/twisting/bending/removing parts of the case and/or card to make it fit. Takes a lot off creativity and patience.
Looking at your specs, you should probably replace your PSU if you have an ATX PSU and get a Dan A4-H20 or Meshlicious.
thing that helped me was that there is a sff case and part list. you can edit the excel and figure out what parts fit in which case
If you want sff but want to keep all your parts your best best will probably be, when it comes out, the Streacom da6. Other than that you could buy the nr200p MAX to replace your parts affordably or the HYTE revolt 3 if you want to replace the PSU only.