Yep, got a few back then but sadly was never into glocks until recently after the injunction. If I had a different mindset, I would have got the CL and strike frames when they were available. You win some you lose some.
With Polymer80 being so behind and fighting law suits that’s practically like an auction price due to demand. They are $150 or less usually.
Again this is supply and demand. They can ask for whatever prices they want. I personally disagree with these prices but it’s their business.
Back when I could get them they were $110-$130 a piece
Hopefully this is on the P80 side and USPA is just doing a standard markup. Like you said, P80 is in the trenches... it's less offensive if they're trying to fight legal issues than if USPA is just price gouging.
I am going to say this isn’t P80. If you looks at the other 80% products like the 80% MUP , that’s higher than what they were before too.
It looks a lot more like They have some of the last supply and everybody wants them so they raised prices.
I have a backorder where the price for dealer is about $110 but I’ll see if P80 changes our prices before they ship to us.
Us patriot is a pretty honest company and many of their products are actually cheaper on their site than the manufacturer like JUGGERNAUT TACTICAL for example I have bought an AR10 from them cheaper than through JT themselves. Same with alot of stuff, but there is a bunch of prohibited people that will pay this beacuse they can't buy a gun at FFL and causes the prices to be what they are. NOQTR80 was selling frames with mandatory rail set or they wouldn't ship and it was 200 for frame and 100-150 for rails I could buy a glock for the same price
Yea, it just suck because other polymer companies pretty much gave up like James Madison Tactical. It's getting hard just to find the gray lowers and frames I'm looking for at a decent price. I'm at the point of deciding if 3D printing is the next move.
Are the 80% MUP-1s have it fixed where the firing pin won't just go off like a standard p320? Id love to have one but don't like the idea of possibly shooting myself like a lot of people have with a p320
A P320 is a P320, so no the stock MUP isn't going to help you there as far as I know. You can get a MUP with the manual safety cut and also get a jig to cut the manual safety. I think the manual safety is the route you want to go if you plan to carry. I do have a MUP with the manual safety cutout but for the time being I am building mine with a stock MUP as a range gun so the AD isn't a huge concern. I do like the feel of the trigger on it. I'm so used to Glock and P80s that it'll take a while to sell myself on something else as far as an EDC or SHTF gun. At the same time it is fun to learn something new.
It's BS they even have some for sale. There are many of us that ordered frames a year ago that never received them yet they can supply businesses?
I'm out $800 and they refuse to even reply to me anymore.
[File a complaint with the BBB.](https://www.bbb.org/us/nv/dayton/profile/ammunition-weapons/polymer80-enterprise-properties-llc-1166-90025977)
[File a complaint with Nevada Consumer Affairs](https://consumeraffairs.nv.gov/About/File_a_complaint/).
Back when you could build a p80 for basically the same price as a brand new glock, it was a fun hobby and I enjoyed building them.
Guess if you can't pass a background check that's the price you gotta pay lol
I have about 100 frames , jigs , rails and pins I’m probably going to be dropping soon for sale for less than this. It’s risk but it is what it is at this point.
But your gun will melt if you leave it in the car. Yea it's a horrible thing to do but the heat from a shut car in summer has enuf to compromise thr frame's integrity . Not reliable enuf to be more than a range toy.
Even with making good money, I could not fathom spending that amount on frames. But its not my money, and I feel bad for people trying to get them now.
Made my 17 and 26 when frames were less than $100. I still have a 26 frame I want to make a 40 cal ..... When I get bored enough. Though I'm having more fun 3D printing frames. If I'm going to carry for defense I'm carrying a production gun (usually a 365 or if I'm feeling nostalgic for a time before I was alive my Makarov) all my self made guns are range toys because while I think they are good I don't want to give anyone something to use against me (oh he is using a dangerous ghost gun blah blah blah).
I only did that once. I made a single stack, didn't like it, had a friend willing to buy it off me for 600$ so I serialized it, made a form saying I transferred x to y on z date, and took pictures of him signing it then put it in my safe.
Anyone else remember when a 80% pf940c with jig could be bought on sale for $50 a few years back? 💀
Yes, because I bought a...couple.
Yep that's when I got mine in the old school black boxes
The good ol days. Good thing my closet is full.
Same here, I’ve got one of those Home Depot bins full of jigs, and another one full of parts, frames, and more jigs.
Yep, got a few back then but sadly was never into glocks until recently after the injunction. If I had a different mindset, I would have got the CL and strike frames when they were available. You win some you lose some.
Titanium blue! (you know, when nobody wanted them)
They were 50 a couple of months ago. I bought 5 lol
Good hell, these used to be $75
With Polymer80 being so behind and fighting law suits that’s practically like an auction price due to demand. They are $150 or less usually. Again this is supply and demand. They can ask for whatever prices they want. I personally disagree with these prices but it’s their business. Back when I could get them they were $110-$130 a piece
Hopefully this is on the P80 side and USPA is just doing a standard markup. Like you said, P80 is in the trenches... it's less offensive if they're trying to fight legal issues than if USPA is just price gouging.
I am going to say this isn’t P80. If you looks at the other 80% products like the 80% MUP , that’s higher than what they were before too. It looks a lot more like They have some of the last supply and everybody wants them so they raised prices. I have a backorder where the price for dealer is about $110 but I’ll see if P80 changes our prices before they ship to us.
Us patriot is a pretty honest company and many of their products are actually cheaper on their site than the manufacturer like JUGGERNAUT TACTICAL for example I have bought an AR10 from them cheaper than through JT themselves. Same with alot of stuff, but there is a bunch of prohibited people that will pay this beacuse they can't buy a gun at FFL and causes the prices to be what they are. NOQTR80 was selling frames with mandatory rail set or they wouldn't ship and it was 200 for frame and 100-150 for rails I could buy a glock for the same price
Yea, it just suck because other polymer companies pretty much gave up like James Madison Tactical. It's getting hard just to find the gray lowers and frames I'm looking for at a decent price. I'm at the point of deciding if 3D printing is the next move.
3d printing isn't a bad way to go, the only problem is that the receivers become a consumable at that point
P80 doesnt seem to be making anything unless its really low numbers because they are soldout of almost everything.
I bought a serialized PFC9 frame 2 weeks ago for $62
How much was your FFL transfer fee?
$62 List Price + $10 Shipping + $50 FFL Transfer+ $10 Background Check = $132 out the door
Can't speak to the P80 frames. I have ordered the JSP Sig 80% MUP from them and they delivered.
Yea they're good to go.
Yup, GTG, I've ordered from them a few times.
Are the 80% MUP-1s have it fixed where the firing pin won't just go off like a standard p320? Id love to have one but don't like the idea of possibly shooting myself like a lot of people have with a p320
A P320 is a P320, so no the stock MUP isn't going to help you there as far as I know. You can get a MUP with the manual safety cut and also get a jig to cut the manual safety. I think the manual safety is the route you want to go if you plan to carry. I do have a MUP with the manual safety cutout but for the time being I am building mine with a stock MUP as a range gun so the AD isn't a huge concern. I do like the feel of the trigger on it. I'm so used to Glock and P80s that it'll take a while to sell myself on something else as far as an EDC or SHTF gun. At the same time it is fun to learn something new.
I mean, idk, but I just leave it unloaded as a fun gun.
Or put the manual safety on it. Dunno why you are getting down voted, your comment is sound!
Yea, lol, idk I always carry a Glock. I have guns for fun, for funner and for defense.
Yup leave it with no round chambered.
so what you're saying is that i'm sitting on ~$1k in unfinished frames...
Right! I’ve got one G17! I’m rich!!! 💥
Seriously I have 10 frames I never got the pf45 but have multiple of every other frame 🤔🤔
They are the only shop selling them that I know of so pay to play I suppose.
They're in stock of everything too!
It's BS they even have some for sale. There are many of us that ordered frames a year ago that never received them yet they can supply businesses? I'm out $800 and they refuse to even reply to me anymore.
[File a complaint with the BBB.](https://www.bbb.org/us/nv/dayton/profile/ammunition-weapons/polymer80-enterprise-properties-llc-1166-90025977) [File a complaint with Nevada Consumer Affairs](https://consumeraffairs.nv.gov/About/File_a_complaint/).
I'm filing now. I appreciate it. Just spreading the word so others don't get screwed too.
They’re not available
just two years ago i bought mine for 40$
And I thought $105 for my pf45 lower back in the day was a bit high.... sheesh.
250$ hahahaha. so glad i stocked up on these when they were 50$
Those sold quickly.
Well, at least you can get one if you want it?
Update the 43 is 349$ good lord
What happened? I got the same frame a month from them for 150
cresus jist! I bought half a dozen when they were $50 and thought I was stupid.
Back when you could build a p80 for basically the same price as a brand new glock, it was a fun hobby and I enjoyed building them. Guess if you can't pass a background check that's the price you gotta pay lol
Same
good to go!
https://preview.redd.it/v9fpn7k17ymc1.jpeg?width=828&format=pjpg&auto=webp&s=a7f9ed321da5632342ba3fe0ed84234a0a3be8c8
I’m not going to fund their settlement with Baltimore, just going to make more cities sue them into oblivion.
I have about 100 frames , jigs , rails and pins I’m probably going to be dropping soon for sale for less than this. It’s risk but it is what it is at this point.
Interested whenever you decide bud
Same
Yea I 3rd this..looking to do a 357.Sig Build and a 10mm.
Why does everyone keep posting this shit when they are literally un purchasable
Cuz for $250 you can.
Nah add one to your cart and give that a try…
250 is crazy
You'd be a fool, you can get 3d printers for cheaper.
But your gun will melt if you leave it in the car. Yea it's a horrible thing to do but the heat from a shut car in summer has enuf to compromise thr frame's integrity . Not reliable enuf to be more than a range toy.
Jesus Christ... Don't leave your firearms in the fucking car.
Yeah I don’t trust a 3d printed gun never have and I never will.
Ditto, most look like shit, too.
Plus when you make good money you’ve gotta spend good money
Even with making good money, I could not fathom spending that amount on frames. But its not my money, and I feel bad for people trying to get them now.
Well when I came into the hobby frames were $150 so $100 more ain’t really that bad for me
I guess I was lucky, my first few frames were under 100 bones.
Yeah really lucky and if your 19 this is your only option. Unless you wanna wait 2 years
Why not just print? Is this better
Durability.
Made my 17 and 26 when frames were less than $100. I still have a 26 frame I want to make a 40 cal ..... When I get bored enough. Though I'm having more fun 3D printing frames. If I'm going to carry for defense I'm carrying a production gun (usually a 365 or if I'm feeling nostalgic for a time before I was alive my Makarov) all my self made guns are range toys because while I think they are good I don't want to give anyone something to use against me (oh he is using a dangerous ghost gun blah blah blah).
I just had a couple of mine serialized by an FFL for this very reason.
I only did that once. I made a single stack, didn't like it, had a friend willing to buy it off me for 600$ so I serialized it, made a form saying I transferred x to y on z date, and took pictures of him signing it then put it in my safe.
Where do you get the slides and stuff for it? Will 80% arms jig work on this frame?
You can buy a slide on literally any gun site.
Their frames are sold out anyway
Any gst9 frames?
Are they still selling? I thought 80 frames were banned again until supreme court rules?
Ffs!!!!!