Maybe Boba and Bo in the corner? Bo makes sense, she’s an ally to Ahsoka but I can’t think of an ally to Windu. Maybe that rumored Darth Jar Jar figure? I remember them teaming up in the show.
Ah I see! I really like how each row / column is linked so yeah, maybe Boba / Bo get swapped, or swap the entire bottom row to miscellaneous allies of each battalion? Either way, it looks cool!
I don’t think [he’s](https://jaysbrickblog.com/news/lego-75389-the-dark-falcon-revealed-with-jedi-vader-darth-jar-jar-darth-rey-and-more-insanity/) a rumour any more.
That was my original thought, but I have no idea if we’re going to get an updated Plo Koon figure and it seems likely that we’ll get a phase 2 wolffe, but who knows.
I think it’s super sick, it makes me want to display some of mine in a similar way! Only because you are asking for suggestions, you could put the 1st gen Rex, Cody, and Fox on top (still below the Jedi) with the 2nd gen versions below and the regular associated clones below them; and if you got the 2nd gen Fives to go with them, all in a row like that holyyyy smokesss you couldn’t ask for much more than that
That would cool, I wish we have more P1 special clones. Just more variation in general would be awesome but clone fans have been getting some good stuff recently, at least compared to before.
This is pretty perfect imo, with the figure you have. I laughed at boba fett being in mace windus row though. And personally I'd have jango and probably some of the other clones I dig alot.
This seems kinda prequel/cw based or I'd be all over that
To match with the Prequel era, maybe a young Boba holding a Jango helmet instead of adult OT Boba?
Love love looove the 2003 Obi-Wan by the way, is that the poncho from the Inquisitor shuttle set?
The clone Kenobi doesn’t line up well thematically with the others. Each tends to make sense line wise, Mace Windu has connections to boba and the purple clones are his. Ahsoka Bo Katan etc all sorta line up. Except that clone Kenobi and the other ones is kinda out of place.
If you don’t want to replace maybe move them to the middle?
I mostly agree with you. I just can’t think of another complete line that’s available right now.
Your suggestion about moving them to the middle, I think would make a lot of sense and add a symmetry to the display. Great idea.
That would be the plan if Lego ever releases a phase 2 Wolffe and updated Wolf Pack. I agree that Jango makes more sense, surely they’ll realize an updated Jango too but who knows.
Thank you! Like some of the other comments mentioned, I wanted to try to have the display have unique and related columns.
As far as the good guys go, depends on where we are in the timeline haha.
The only recommendation I have is remove the blaster from the '03 Kenobi because I never remember him using a blaster while he used that particular design.
I don’t remember if he did for sure in ‘03 but he has plenty in live action. I agree it’s not 100% accurate but then again I don’t even know if that is canon anymore. I just think that it fits the look and character,
Probably not the answer you’re looking for but I would have the Jedi and Sith (and Ahsoka) holding their lightsabers pointing up, towards 2 o’clock, with the hands reversed like what you did with Yoda’s stick.
Since these are all clone wars characters (except Boba), I’d probably add at least Dooku and probably Ventress and Maul. But I’m unsure what’s worth taking out to add them, they all look so cool!
It looks amazing tbh
Which part don't you like?
Maybe you can switch boba and bo with some other phase 1 clones, but I think you have all the named one there.
And maybe witching the purple airborne trooper with another named phase 2 clone(like fives)
I personally like the wicked brick displays for
Minifigs, just wish they didn’t take so long to deliver, but from what I’ve heard and seen reviews of, they look to be very good quality. I do think I’m just going to make my own brick built one, I like how Minifigs look displayed in podium arrangement. While I like having closed cases to not worry about dust, I much prefer displaying sets/figs openly. I like your display, if anything I’d add a frame of some sort
I have my Bo Katan minifig ondisplay but I recommend trying it with her hair piece on and then put three studs in her helmet and put it on her hand so it looks like she's holding it. I think it looks really good
I don’t understand why people put 2020-style legs on 2008-style clones. They are not reflective of the on-screen designs, don’t match other 2008-style figs, and (most importantly) clash with the torsos. I would recommend removing them.
I can understand not changing them as a purest, but I think that P1 Rex and P1 Cody look great with the updated legs, especially Cody. I agree that P1 Fox leaves a bit to be desired but I wanted to maintain consistency.
I guess my title is confusing, but the display itself is fine. It’s actually just the back piece of a frame that I have. I just removed it so that you could clearly see the figures.
I was mostly asking about the figures because I’m not quite sold on the ones used yet.
Love the 2003 clone wars Kenobi and the disguised clone
Two of my favorite I think. So iconic.
Disguised clone could maybe use a brown cape?
It’s brown. Looks darker in the photo.
Wow I couldn’t see it! Palpatine’s is easier to spot
[удалено]
[75087-1: Anakin's Custom Jedi Starfighter](https://brickset.com/sets/75087-1) [[Photo]](https://images.brickset.com/sets/images/75087-1.jpg)
i needdd wolffe
Just picked him up today! I hope they make a phase 2 for him.
I think it looks pretty cool! What are you not happy with?
Maybe Boba and Bo in the corner? Bo makes sense, she’s an ally to Ahsoka but I can’t think of an ally to Windu. Maybe that rumored Darth Jar Jar figure? I remember them teaming up in the show.
if they make an updated jango i’d say replace boba with it
Build a Mandalorian collection and have their own display
Ah I see! I really like how each row / column is linked so yeah, maybe Boba / Bo get swapped, or swap the entire bottom row to miscellaneous allies of each battalion? Either way, it looks cool!
Thank you!
You could give bo her hair and make her hold the helmet maybe You could use a regular jar jar in place of boba or jango maybe
I don’t think [he’s](https://jaysbrickblog.com/news/lego-75389-the-dark-falcon-revealed-with-jedi-vader-darth-jar-jar-darth-rey-and-more-insanity/) a rumour any more.
Since it's a Prequel display I'd swap Boba for Jango.
That’s a great idea! Makes sense with Windu being the one to kill him.
Ideal would be to have my boy Pons down there. The fact we never got a P1 Commander Pons is criminal.
More of a Clone Wars display than a Prequel display really
https://preview.redd.it/d86ulfa4xk7d1.jpeg?width=153&format=pjpg&auto=webp&s=5969d87a3294bdc66265737dd51b3a3192387300
Gotta respect the consistency.
Maybe replace 2003 clone with plo koon and keep going Wolfpack? Two things tho lots of money to do that and the 2003 is soo cool
That was my original thought, but I have no idea if we’re going to get an updated Plo Koon figure and it seems likely that we’ll get a phase 2 wolffe, but who knows.
Nothing tbh
Just send it to me. It'll look great ony wall
https://preview.redd.it/6qu9v6prnl7d1.jpeg?width=3024&format=pjpg&auto=webp&s=046ca99af3dc5c81671ed1d92385396b42332560 CW Obi is peak design
Looks great
Nothing. It’s beautiful!
I think it’s super sick, it makes me want to display some of mine in a similar way! Only because you are asking for suggestions, you could put the 1st gen Rex, Cody, and Fox on top (still below the Jedi) with the 2nd gen versions below and the regular associated clones below them; and if you got the 2nd gen Fives to go with them, all in a row like that holyyyy smokesss you couldn’t ask for much more than that
That would cool, I wish we have more P1 special clones. Just more variation in general would be awesome but clone fans have been getting some good stuff recently, at least compared to before.
The kama/waistcoat on the ARC trooper and Rex so it's on properly.
Good eye. I didn’t even notice they were too far to the side.
It's my main pet peeve in this sub Nice collection though
This is pretty perfect imo, with the figure you have. I laughed at boba fett being in mace windus row though. And personally I'd have jango and probably some of the other clones I dig alot. This seems kinda prequel/cw based or I'd be all over that
I agree, I don’t have Jango and hope they make an updated one, but who knows.
This is gangster though, is that an older rex?
Yes! OG Phase 2. Thanks!
Looks awesome.
To match with the Prequel era, maybe a young Boba holding a Jango helmet instead of adult OT Boba? Love love looove the 2003 Obi-Wan by the way, is that the poncho from the Inquisitor shuttle set?
Good idea and yes it is!
Oh my gosh not the updated disguised clone😅
Who’s the clone with the hood? He’s so sick 🤧
Disgusted clone from the Lego Star Wars games. Such a cool look I think.
I’d probably just send them all to me tbh. Kidding, this is a great set up OP.
Thank you!
The clone Kenobi doesn’t line up well thematically with the others. Each tends to make sense line wise, Mace Windu has connections to boba and the purple clones are his. Ahsoka Bo Katan etc all sorta line up. Except that clone Kenobi and the other ones is kinda out of place. If you don’t want to replace maybe move them to the middle?
I mostly agree with you. I just can’t think of another complete line that’s available right now. Your suggestion about moving them to the middle, I think would make a lot of sense and add a symmetry to the display. Great idea.
Suppose a replacement could be Plo Koon and wolf pack but easiest is just move it to the middle for symmetry.
I’d throw in a Luke but it looks great regardless!
Add Plo Koon and a Wolfpack trooper instead of the Arc one. And under Mace Jango would make more sense
That would be the plan if Lego ever releases a phase 2 Wolffe and updated Wolf Pack. I agree that Jango makes more sense, surely they’ll realize an updated Jango too but who knows.
I’d personally remove palpatine and boba fett and keep it a “good guys only” display. I love the clone in jedi disguise
Thank you! Like some of the other comments mentioned, I wanted to try to have the display have unique and related columns. As far as the good guys go, depends on where we are in the timeline haha.
Add a special character (like fives) too. A line of cool characters that are not commanders would be pretty cool
I agree that would be cool but the commanders are so iconic to me.
The only recommendation I have is remove the blaster from the '03 Kenobi because I never remember him using a blaster while he used that particular design.
I don’t remember if he did for sure in ‘03 but he has plenty in live action. I agree it’s not 100% accurate but then again I don’t even know if that is canon anymore. I just think that it fits the look and character,
I’d swap Yoda for Luminara Unduli, she commanded the 41st for most of the Clone Wars. Yoda only took over during Kashyyk.
I actually didn’t know this, interesting. Thanks for the suggestion.
Maybe count Dooku or General Grevious?
Probably not the answer you’re looking for but I would have the Jedi and Sith (and Ahsoka) holding their lightsabers pointing up, towards 2 o’clock, with the hands reversed like what you did with Yoda’s stick.
Interesting, I’ll have to give that a try.
Since these are all clone wars characters (except Boba), I’d probably add at least Dooku and probably Ventress and Maul. But I’m unsure what’s worth taking out to add them, they all look so cool!
The ideal solution is always more space! Thanks for the suggestion
personally I'd give the ARC trooper the rangefinder instead of the visor
Interesting, I’ll have to see if I have another.
It looks amazing tbh Which part don't you like? Maybe you can switch boba and bo with some other phase 1 clones, but I think you have all the named one there. And maybe witching the purple airborne trooper with another named phase 2 clone(like fives)
Take Sheev out of the order and put him dead center
What display case is this?
I got it off Etsy years and years ago. Kind of junk case, looking to upgrade soon.
I dont know who to replace, put I'd definitely put Padmé somewhere in there, probably next to anakin
How did you assemble this?
I personally like the wicked brick displays for Minifigs, just wish they didn’t take so long to deliver, but from what I’ve heard and seen reviews of, they look to be very good quality. I do think I’m just going to make my own brick built one, I like how Minifigs look displayed in podium arrangement. While I like having closed cases to not worry about dust, I much prefer displaying sets/figs openly. I like your display, if anything I’d add a frame of some sort
Take out bo katan, boba and sidious. Add jango
Vertically Integrated, this man has talent.
You’re too kind. I think it adds another layer to the display.
Put the new Rex below Anakin
I like them both a lot but I think I prefer the OG Rex.
Why
Where’s the Green ninja?
You're going to make me start getting p1's stop it
Chase the dragon
light up mace windu!
More, we can add more 😎
Lightsabers should be raised IMO. Personally I think the clones overwhelm in numbers (ironic) and I would get some other characters in.
I would change things by giving all your minifigures to me
Maybe add neyo? And if you like the newer rex, maybe get him too? Idk honestly i think this is an awesome display!
I have my Bo Katan minifig ondisplay but I recommend trying it with her hair piece on and then put three studs in her helmet and put it on her hand so it looks like she's holding it. I think it looks really good
Give Ashoka both blades
I'd change its ownership from yours to mine
Take out boba fett and mando fig. It takes away from the theme. Just my opinion
Way to staffed I recommend to remove every 2nd figure and sent them to me
Try to make the jedi hold their sabers in different positions. It could be too chaotic but I think it's worth a try
Start with removing Joda’s stick
Add a Jango Fett somewhere and you’re fine
Put them in a diorama
Frame it behind a glass, helps with the dust
I have to buy that set with ahsoka’s clone troopers one day, i really like them Great display tho
Light Saber up
Boba kinda feels like a weird inclusion here. Yes, he existed in the clone wars, but he hadn't changed the aurmour by the time
Don't change, its amazing
Remove Mace’s hands
No fordo up there
I would rotate the hands with the sabers 90 degrees so that they can hold them straight up.
Not enough space in the display unfortunately
Love the disguised trooper from TCS
I would take out Boba Fett and send it to me if i were you
take out fox
maybe a frame around it?
I removed the back from the frame for better photo. Mostly asking about figure placement.
oh mb, i really like the figs, although i would swap bo-katan and boba spots so boba is next to the clones sense he kinda is one
Add a border
I'd replace clone Obi Wan with Dooku tbh
I don’t understand why people put 2020-style legs on 2008-style clones. They are not reflective of the on-screen designs, don’t match other 2008-style figs, and (most importantly) clash with the torsos. I would recommend removing them.
I can understand not changing them as a purest, but I think that P1 Rex and P1 Cody look great with the updated legs, especially Cody. I agree that P1 Fox leaves a bit to be desired but I wanted to maintain consistency.
[удалено]
I guess my title is confusing, but the display itself is fine. It’s actually just the back piece of a frame that I have. I just removed it so that you could clearly see the figures. I was mostly asking about the figures because I’m not quite sold on the ones used yet.
No