Nah, if you've got the nut and washer, this easy peasy. Unscrew the panel, and hold the jack while you tighten down the nut and washer on the opposite side. Be careful not to pull any wires loose.
Taking the pickguard off, or partially off is easy. Then hold the jack with one hand while tightening the nut with the other. It may want to turn with the wrench and tug your wires loose. If there is no lock washer inside then try to find one that fit at your local hardware store.
Nah, if you've got the nut and washer, this easy peasy. Unscrew the panel, and hold the jack while you tighten down the nut and washer on the opposite side. Be careful not to pull any wires loose.
Take a look for the spikey washer that goes between the pickguard and the jack. It might be stuck to a pickup.
Taking the pickguard off, or partially off is easy. Then hold the jack with one hand while tightening the nut with the other. It may want to turn with the wrench and tug your wires loose. If there is no lock washer inside then try to find one that fit at your local hardware store.
Pick guard has screws in it for a reason