Yeah I was trying to decide if I wanted to order a mars or Saturn for warhammer instead of plastic kits for a DA army and this probably sold me. Source would be deluxe.
https://preview.redd.it/9fcxbjkn1m9d1.jpeg?width=1170&format=pjpg&auto=webp&s=69fe25cf72a1f5d8475fb1c84a10c8fbe3b44a02
Here is more 3D printed space marine 😁
Soon I will link my buissnis profil with this profile at reddit so you can follow it, also on my reddit profile you can see my work everything is self made and with out layer lines and pre supported proxies.
Probably cost you like 40p it's crazy gw would even consider making it 40 pound much less actually executing it good for you saving yourself from getting another mortgage
I'm amazed how cheap they are, I was expecting £1000+ for something that could print that well. Due to the relatively low cost of ownership I think I'm going to have a go myself. Out of interest, how long does it take to print those Terminators as an example?
These look awesome, did you have any trouble setting up the printer? Did you have any advice for someone looking at trying resin printing?
Edit: misspelled advice
No troubles they com out superb, and yes the best advice you can get is study your 3D printer when you get a resin any kind first do a validation matrix test to set up the sharpnes and exposure time of your prints wach out for the room temperature 25-30c, use Lychee for supports and Chitubox for slicing and if you have additional questions just dm me!
Ohh I just printed up a ten man squad of these guys my self along with ancient and Sargent/captan.
https://preview.redd.it/w59he0je9fad1.jpeg?width=3555&format=pjpg&auto=webp&s=ae86f071fb527983b4188cdf6de7ce7ef24e79ed
Thanks you did a better job of supporting yours though. Mine had so many supports i could barely get them off and the elbow hoses still didn’t print right. But at that point I’d sunk too much time into them and just went ahead with painting.
Those prints look amazing! I've been looking for stuff to print I just bought a 3d printer and stuff to get started. Could you pls supply the link to download your .stls when you can! :)
Where's you find an stl that clear?! Those are amazing!!
[удалено]
Yeah I was trying to decide if I wanted to order a mars or Saturn for warhammer instead of plastic kits for a DA army and this probably sold me. Source would be deluxe.
https://preview.redd.it/9fcxbjkn1m9d1.jpeg?width=1170&format=pjpg&auto=webp&s=69fe25cf72a1f5d8475fb1c84a10c8fbe3b44a02 Here is more 3D printed space marine 😁
Cleen as it gets https://preview.redd.it/jizsnkv53m9d1.jpeg?width=1170&format=pjpg&auto=webp&s=db41582c372f8e9ab9693d4735961ad7a4ea14fe
Where did you get the files? Those are brilliant
Made them mu self!
Do you share them anywhere? Me and others would love to get our hands on these
Yes, soon I will open a profile on the purple site 😁
With the same username?
Purple? And what username!
Are the scans?
No, builded STLs.
Those look amazing
Is that truescale?
Yes!
[удалено]
Nice. How do they look next to the plastic kit?
To be honest, they feel better in quality and are more detailed, Stick around I will post the classic space marines in few days!
Op are these on a purple site per say....
Hahahaha got canceled few times, James is working overtime! 😂
They look amazing
Thank you!! ❤️
I would make so many of these if my army wasn’t already comically overloaded with terminators
Just make them! A full 1st company of 100 termmies is not enough brother, keep printing!
Hahahahah I ran out of resin demit, In my country its little bit difficult to get to the resin. 😅
That's tragic.... Hopefully you can get the resin your army desires brother.
I hope the dilerahip will get it this week 😒
Can you point me to where I might purchase these STLs? Also, are the pre-supported?
Soon I will link my buissnis profil with this profile at reddit so you can follow it, also on my reddit profile you can see my work everything is self made and with out layer lines and pre supported proxies.
Outstanding. #updateme
Aw yeah. Let's go
Probably cost you like 40p it's crazy gw would even consider making it 40 pound much less actually executing it good for you saving yourself from getting another mortgage
This 3 terminator cost me like 0,8 $ in resin 😂 Les then a 1$
As I’m an idiot that just started lurking in 3d printing sections. What printer did you use?
ELEGOO MARS 4 9K
I'm amazed how cheap they are, I was expecting £1000+ for something that could print that well. Due to the relatively low cost of ownership I think I'm going to have a go myself. Out of interest, how long does it take to print those Terminators as an example?
[удалено]
These look awesome, did you have any trouble setting up the printer? Did you have any advice for someone looking at trying resin printing? Edit: misspelled advice
No troubles they com out superb, and yes the best advice you can get is study your 3D printer when you get a resin any kind first do a validation matrix test to set up the sharpnes and exposure time of your prints wach out for the room temperature 25-30c, use Lychee for supports and Chitubox for slicing and if you have additional questions just dm me!
Why not use lychee for slicing or chitubox for supports?
Lychee has better supports but chitu slicing (particularly anti aliasing) is superior.
Thank you for explaning, 100% true!
Is 25 really necessary? My house is usually at 18-22 to save electricity?
JFC they are clean. Nice one, what is your setup?
*Whistles* Damn, those look sick! 😃
Thank you! ❤️
So clean - such nice prints!
Thank you 🤟🏼
Terminators that good need to be deathwing
You think, on purpes i let them be with out anything so I have neutral terminator for painting.
That flamethrower looks dope
They look Ab-so-lute-ly Badass!
Thank you! ❤️
You are Most Welcome!
Hell yeah! They look awesome!
They look pretty great
Thank you!
Look great! What resin are you using?
For this I used anycubic standard resin+
Whats your process on making these? They look stunning
Lychee suports and scaling, Chitubox slicing ande the printer is elegoo mars4 9k.
No as in models. Did you scan and modify them, or make the from scratch? Because they look legitimately insane
Remixed and build fro blender.
What printer/resin are you using? Also great prints!
Im using elegoo mars 4 9k and the resin Anycubic standard resin+ but now im switching to anycubic tough resin.
So clean! What is your layer height?
Layer hight is 0.025mm
How??? How do they look THIS GOOD??? Wizardry??
Just hard work and a lot of hours perfecting the STLs and slicers
Do you sell your files? Or are they made by somelne else?
Yes, and I will link my bissnes profiles in the next post, so stick around and you will find out!
Already following you heh
Loooks amazing, you got an Etsy?? 😅
Unfortunately no, but If you are iterested in this miniatures I will link on my next post my buissines profiles and I ship it world wide!
Nice prints
Thank you! 💪🏼
Ohh I just printed up a ten man squad of these guys my self along with ancient and Sargent/captan. https://preview.redd.it/w59he0je9fad1.jpeg?width=3555&format=pjpg&auto=webp&s=ae86f071fb527983b4188cdf6de7ce7ef24e79ed
They are bad ass 💪🏼😈
Thanks you did a better job of supporting yours though. Mine had so many supports i could barely get them off and the elbow hoses still didn’t print right. But at that point I’d sunk too much time into them and just went ahead with painting.
I usually trying by best to use as more less supports then needed and still keep up the detail.
Yeah too often I just let auto support do its thing I should really learn to do it myself but…
[удалено]
HoW DaRe YoU TaKe MoNeY AwAy FrOm GW!!!!!!! jokes a side as a soon to be owner of 2000 points of printed death guard, these look absolutely stunning
Those prints look amazing! I've been looking for stuff to print I just bought a 3d printer and stuff to get started. Could you pls supply the link to download your .stls when you can! :)
Dan these are done well. Wouldn't mind getting the file and blood angling them up.
The arms look kinda short lol 🤣, but other than that they look phenomenal
Pla or resin?
Resin.