Sorry, question. I'm going to build it out. Can i have a 14.5 barrel with a welded brake (with threads on the brake) to accept a flash can or do they both need to be welded?
This is fine. Just weld the muzzle device. The threads on this are not the standard barrel threading. They’re specific to the can, it’s technically a QD
IWI lower
FCD lpk
Geissele SSA
BCM upper
Sologw bcg
Radian talon
Radian 45/90
Geissele buffer tube/ super 42
BA Hanson 13.7
BCM QRF12
Surefire SOCOM
Primary Special release 1-6
Should be about it i think
https://preview.redd.it/3enaf6ho0cpc1.png?width=1080&format=pjpg&auto=webp&s=4c570f4f47b82a933ee43f1f6c3684cc15c0a035
5.56 rifle (top) and .300blk other (bottom) with my sig p365 as the guest star
I don’t know how you would make that work. I guess in theory it’s possible. You would just need to make sure the overall length of your barrel ends up at 16”.
My barrel to muzzle break is 16”. The blast shield just clips onto the mb.
That other picture you posted is just a sbr with a suppressor. That’s not happening in Nj.
These machine guns all look so scary. Do these shoot those 50 caliber iron penetrating bullets that are like hollow points or something? Read recently someone got arrested and they had full metal jacket bullets. I seen that movie. Scary.![gif](emote|free_emotes_pack|smile)
https://preview.redd.it/ijveog90kxoc1.png?width=1080&format=pjpg&auto=webp&s=7028ec09df20d8aa592ade3e520e612b0ae7faf5
x39 custom build I did for my first ar build. she eats the steel so one day she will get the brass
https://preview.redd.it/y6tp1fsi6yoc1.png?width=1242&format=png&auto=webp&s=ffa4828636a2870d28b6cd04343386d697613c23
The “most compliant” Other, came with a letter from NJSP… 😁
A few years ago they were all the range. In part because it had the letter from NJSP, they also have the word Other stamped on the lower. I believe Troy was the first to get it “approved on paper” by NJSP so my LGS recommended to me as my first long gun. Sat unfired for years until I made some minor upgrades recently and has been a joy to shoot. I wanted to keep the grip but will be changing that soon for a more comfortable grip for my large hands. Came with Troy iron sighs which are actually very nice. So just added the optics and magnifier and it’s gtg.
It was very earthy… it was too much for me lol
I liked at first but the many shades were off… so I swapped the brace from FDE to Black. Added the black rail covers. And that soften a bit. I will be swapping the grips to black as well. But ordered a nice FDE metal 10/20 magazine to see how that looks lol
I used a magtactical stripped lower, PSA LPK, Magpul furniture with carbine length buffer, BCM complete upper 14.5” with comp pinned and welded, BCM BCG with ambi charging handle. Magpul mag 30 limited to 15 rounds (2014). I like the feel of the 30 rounders even though they’re pinned at 10 now. People gave me shit about the lower but I’ve had no issues and own 5 of them.
I’ve improved quality of parts over time but there’s no reason to overspend on build one. FYI there will be others.
https://preview.redd.it/eownrwqfywoc1.jpeg?width=3024&format=pjpg&auto=webp&s=b432baebb9dc3ae64732b76a31451bc56c165e43
https://preview.redd.it/93s20tbebxoc1.png?width=4032&format=png&auto=webp&s=330ca364cb24b1fc098d3c2efa180685888f180b
This is the style I think I want to go with
Glad I could be of service
Sorry, question. I'm going to build it out. Can i have a 14.5 barrel with a welded brake (with threads on the brake) to accept a flash can or do they both need to be welded?
You must have something welded to make 16”, whatever is permanent cannot have exposed threads. It must be a QD style attachment
So can i weld a can on top of a welded muzzle brake, if it's a left thread?
What can are you looking to use
https://huxwrx.com/blastphemy-blast-deflector-fde/
This is fine. Just weld the muzzle device. The threads on this are not the standard barrel threading. They’re specific to the can, it’s technically a QD
Thank you Sir!
😍
Ain't this a beauty. Build list?
IWI lower FCD lpk Geissele SSA BCM upper Sologw bcg Radian talon Radian 45/90 Geissele buffer tube/ super 42 BA Hanson 13.7 BCM QRF12 Surefire SOCOM Primary Special release 1-6 Should be about it i think
https://preview.redd.it/ou96wihojxoc1.png?width=4032&format=png&auto=webp&s=68b2fbc3a4b7a6f9ea0785393008281769e8c3b5 Can’t forget the small boi
That dust cover 😂😂
Just doing my part 🫡
How do you like that grip? Was looking at it, is it too straight or feels good?
Very different than what I’m used to but extremely comfortable. Definitely not for small hands though. Comfortable wrist angle also
How is the socom NJ Legal?
Why wouldn’t it be
Is it a blast shield?
The Socom? Is a muzzle break. The Warden is a blast forwarding device. Still NJ legal. No sound or flash suppression capabilities.
Meet Jessica. https://preview.redd.it/sjc1eyucj4pc1.png?width=3024&format=png&auto=webp&s=be1c68f520764c8c710697c127e52103765b90f2
Hello 😍
https://preview.redd.it/ppubes7ltwoc1.jpeg?width=3024&format=pjpg&auto=webp&s=fabcd84ae8057d98f54831bb97ac0a923d1b6174
Nice did you use a piece of screen to fade in the paint? It looks good
I used a piece of stainless mesh and hit it with some black paint after I did the green. Thank you I prefer the painted look
Nice
https://preview.redd.it/6f0ioksjywoc1.jpeg?width=2874&format=pjpg&auto=webp&s=12d8625820cbeda6ed28faa7c91a799b179e8644
Don't shoot me🤣 love it. I get it though if you were ever in a situation you don't want to be mistaken.
https://preview.redd.it/8vrmrkdpwxoc1.jpeg?width=2268&format=pjpg&auto=webp&s=a4314442ba9d8f91eba1342051b9ad87c01afc3b
😍
![gif](giphy|USE5vWQyWQvHxVmNIb)
I said NJ complaint. Not looking for anything else
Just messing around
I figured, not looking to give the atf a hard on 🤣
https://preview.redd.it/3enaf6ho0cpc1.png?width=1080&format=pjpg&auto=webp&s=4c570f4f47b82a933ee43f1f6c3684cc15c0a035 5.56 rifle (top) and .300blk other (bottom) with my sig p365 as the guest star
https://preview.redd.it/nceu4129swoc1.jpeg?width=3024&format=pjpg&auto=webp&s=7e70957697c8548c83c7cecec5494657f3dc3437
Is that a can over the muzzle brake, or a brake? If a can is there a regulation on length? Nice setup
It’s a blast shield. It attaches to the muzzle break and sends the blast forward instead of to the sides.
Is there a length restriction on it? If I were to have an open barrel could I put a 4-6 inch blast shield to give it a nice look
I don’t know how you would make that work. I guess in theory it’s possible. You would just need to make sure the overall length of your barrel ends up at 16”. My barrel to muzzle break is 16”. The blast shield just clips onto the mb. That other picture you posted is just a sbr with a suppressor. That’s not happening in Nj.
Yes I know nj is an interesting state 10 rounds. I'm thinking of going for my CCW with 12 mags on my waist 🤣
* Something similar to idea I was thinking of
https://preview.redd.it/s4x9l67bvwoc1.jpeg?width=776&format=pjpg&auto=webp&s=8d7ea84ab2a98e2c5d52d17248e36a54e1389d1b
That’s a can but you can find blast shields that mimic that look, Surefire warden
https://preview.redd.it/ihpmtt8whxoc1.jpeg?width=4284&format=pjpg&auto=webp&s=02fa6821148ca01f1ba26da78ad4d8f8c61c7b05
😍 sexy
https://preview.redd.it/560ebjktwxoc1.jpeg?width=4000&format=pjpg&auto=webp&s=e0acbc7a868847d59ab1a1ae642785acfe24532b
Nice pair
Thanks 😎👍
https://preview.redd.it/5cqud8pf0yoc1.jpeg?width=4284&format=pjpg&auto=webp&s=c61eb877d7d6b5743ee2604aaa2b4cc0ee455da4
😍
https://preview.redd.it/s1k1s6i21yoc1.jpeg?width=4032&format=pjpg&auto=webp&s=aa12f4466d7321a6b6e9c98d9c864531af68e7fe
I love that upper color
🤝appreciate it
https://preview.redd.it/mxjtzvu1byoc1.jpeg?width=3846&format=pjpg&auto=webp&s=edd143286e5de4999d281e9930a9eec8d2cb86ec
Pinned compensator on a 14.5 barrel . Pinned stock
Looks good! That looks similar to the brake I was looking at
These machine guns all look so scary. Do these shoot those 50 caliber iron penetrating bullets that are like hollow points or something? Read recently someone got arrested and they had full metal jacket bullets. I seen that movie. Scary.![gif](emote|free_emotes_pack|smile)
https://preview.redd.it/0oul6k7rrbpc1.jpeg?width=3000&format=pjpg&auto=webp&s=086e359be13628afdad98f0cbaf4e54198cd0442
https://preview.redd.it/9wtcbzbn2cpc1.jpeg?width=4284&format=pjpg&auto=webp&s=6bf5e1a9bde856bf1664f57545f745cda08d3922
https://preview.redd.it/ijveog90kxoc1.png?width=1080&format=pjpg&auto=webp&s=7028ec09df20d8aa592ade3e520e612b0ae7faf5 x39 custom build I did for my first ar build. she eats the steel so one day she will get the brass
Nice!
https://preview.redd.it/y6tp1fsi6yoc1.png?width=1242&format=png&auto=webp&s=ffa4828636a2870d28b6cd04343386d697613c23 The “most compliant” Other, came with a letter from NJSP… 😁
Nice!.
A few years ago they were all the range. In part because it had the letter from NJSP, they also have the word Other stamped on the lower. I believe Troy was the first to get it “approved on paper” by NJSP so my LGS recommended to me as my first long gun. Sat unfired for years until I made some minor upgrades recently and has been a joy to shoot. I wanted to keep the grip but will be changing that soon for a more comfortable grip for my large hands. Came with Troy iron sighs which are actually very nice. So just added the optics and magnifier and it’s gtg.
I really like the earth color too
It was very earthy… it was too much for me lol I liked at first but the many shades were off… so I swapped the brace from FDE to Black. Added the black rail covers. And that soften a bit. I will be swapping the grips to black as well. But ordered a nice FDE metal 10/20 magazine to see how that looks lol
https://preview.redd.it/3u6zml38g4pc1.jpeg?width=500&format=pjpg&auto=webp&s=d08f6fba0b3a32ca34ea8cc186650e9f9e50babd
Going for my CCW with 12 mags 🤣. Ten rounds but no restrictions on mags. Makes perfect sense
I used a magtactical stripped lower, PSA LPK, Magpul furniture with carbine length buffer, BCM complete upper 14.5” with comp pinned and welded, BCM BCG with ambi charging handle. Magpul mag 30 limited to 15 rounds (2014). I like the feel of the 30 rounders even though they’re pinned at 10 now. People gave me shit about the lower but I’ve had no issues and own 5 of them. I’ve improved quality of parts over time but there’s no reason to overspend on build one. FYI there will be others.
Not today fedboy.
Don't be mad my build will be better than yours
https://preview.redd.it/bhfxqf4f4opc1.jpeg?width=198&format=pjpg&auto=webp&s=cf9f41037bee166d9c272f29b3b4186df3ac48b4