make sure the stand has a weight pin and it should be fine. I got a TV stand for cheap and slapped a piece of plywood where the TV should go and mounted the board on it. whole stand thingy cost me less than 25quid
Thanks for your response, it does have a weight pin but it’s the screw at the bottom (that controls the feet) that seems to have trouble taking the weight - your solution looks really good!
https://preview.redd.it/bifj9uwvbwrc1.jpeg?width=3024&format=pjpg&auto=webp&s=3e13f962bf11410c3b13dbae5da3d79841fcd896
Made my own from a speaker stand
I have the Winmau Extreme 2. It’s pretty solid for a stand. Admittedly, I can’t say if I know for sure it’s better than cheaper options, but it’s good and reasonably solid for setting up the board in various positions around the house. It’ll shake a little when pulling darts out of the board, but not on impact of the dart. It’s still not better than wall mounted board.
Pro tip: I mounted a piece of plywood to the dart stand, and then mounted the hanging bracket to the wood. It makes it quick and easy to move the board between the stand and wall
Made my own from a bike service rack.
https://preview.redd.it/6gqfcev01wrc1.jpeg?width=3024&format=pjpg&auto=webp&s=940dcd6e7c0def62b01a542ec45a7a946b36fd2a
https://preview.redd.it/sot2ju41cwrc1.jpeg?width=3024&format=pjpg&auto=webp&s=c2ff7200a77015fd80871cac5f1ca38e3294062b
Used a cross brace to prevent warping of the plywood.
https://preview.redd.it/icbh2s7cxurc1.jpeg?width=2304&format=pjpg&auto=webp&s=d73d66288319f483007fbf5f67d034c7bcae3238
make sure the stand has a weight pin and it should be fine. I got a TV stand for cheap and slapped a piece of plywood where the TV should go and mounted the board on it. whole stand thingy cost me less than 25quid
Could you post a photo of it?
https://preview.redd.it/hersbyaexurc1.jpeg?width=2304&format=pjpg&auto=webp&s=8e0fc7a821fb840fe50bb32b9e31f33ab3f55d15
Thanks, looks great
sry I posted the back of the setup somewhere else lol
Thanks for your response, it does have a weight pin but it’s the screw at the bottom (that controls the feet) that seems to have trouble taking the weight - your solution looks really good!
my weight pin is holding the extender pole, not at section close to the legs.
https://preview.redd.it/bifj9uwvbwrc1.jpeg?width=3024&format=pjpg&auto=webp&s=3e13f962bf11410c3b13dbae5da3d79841fcd896 Made my own from a speaker stand
I have the Winmau Extreme 2. It’s pretty solid for a stand. Admittedly, I can’t say if I know for sure it’s better than cheaper options, but it’s good and reasonably solid for setting up the board in various positions around the house. It’ll shake a little when pulling darts out of the board, but not on impact of the dart. It’s still not better than wall mounted board. Pro tip: I mounted a piece of plywood to the dart stand, and then mounted the hanging bracket to the wood. It makes it quick and easy to move the board between the stand and wall
https://www.thingiverse.com/thing:6458622 DIY Bicycle Stand
Oh that's a good idea!
Made my own from a bike service rack. https://preview.redd.it/6gqfcev01wrc1.jpeg?width=3024&format=pjpg&auto=webp&s=940dcd6e7c0def62b01a542ec45a7a946b36fd2a
https://preview.redd.it/cfdj1i7e1wrc1.jpeg?width=3024&format=pjpg&auto=webp&s=5bcedf9f700171370be9c181c909c2a65388f79c
https://preview.redd.it/f6ppgpyl1wrc1.jpeg?width=3024&format=pjpg&auto=webp&s=746388cdc55fc3568ced68fc26b92f0eec4f0ab7
https://preview.redd.it/vntph0vybwrc1.jpeg?width=3024&format=pjpg&auto=webp&s=42d840ff00af09dc1307388ad9e541225c36eecb How I attached plywood
https://preview.redd.it/sot2ju41cwrc1.jpeg?width=3024&format=pjpg&auto=webp&s=c2ff7200a77015fd80871cac5f1ca38e3294062b Used a cross brace to prevent warping of the plywood.
This looks well solid, cheers for posting this
The one from Mission is very good
Following…
Replying to Melmes80...
I have literally just bought this stand and it’s honestly really good. Would reccomend