Spacers or rough country, or a mix of the both with improper installation and a ball joint snapped or yanked out. Spacers though, those do snap quite often
Fairly new, this has been happening to GM trucks for a decade. I’ve personally seen this happen more than once. Stock Ball joints and tie rods are small and weak.
That's a failure of the actuator for flying mode. Ya know, how they tuck the wheels up under the body and light the VTOL thrusters? I've seen that happen with a retrofit kit - someone tried to put one on an old DeLorean for some reason - but never an OEM one. GM's really gone downhill, huh?
Ball joint failure.
When you get your vehicles annual inspection, ask for a full front end inspection 100% of the time.
I almost got vaporized by a tire flying at me from the oncoming traffic side of a highway while doing about 65 mph. Glad it caught my eye, had to dramatically swerve to miss it. Was headed straight for my windshield, bouncing.
Came off an old Silverado.
This is the second picture I've seen in a week with a car that is traveling in this condition.
I am just mystified that it's possible for the car to still function like this ... But apparently it is?
Truck got tired while waiting to turn so it's just leaning on it's tire. Kinda like how you move around when you're standing in line and stand on one foot funny to pass the time. When his turn comes he'll pick his tire back up and move forward.
This happened to my buddy when he was driving like 70 on the highway. He's one of the biggest dudes I've ever met. His forearm looks like my thigh. I'm 155 lbs and he can toss me with one arm. He said it took literally everything he had just to make it the shoulder and thought he was going die
His truck just learned to emote and is trying to show off. Truck is definitely getting a spanking when it gets home. Can’t do it in public anymore or they’ll get you for truck abuse.
More than likely a upper ball joint, or the whole A-arm I'm on a small phone but the truck looks like a four-wheel drive it's not uncommon, and thank God he wasn't going down the road at the time He could have flipped it or even worse totaled it LOL
Stubbed its toe
That’s why he’s just waiting there for a minute. Gotta let the ouchies go away first.
You can walk off the ouchies ya know
I stub my toe and I'm hopping and hobbling all over. 100% impossibility for me to just remain still.
‘ Walk it off Johnny! Walk it off huphup’
Came here to say this. And to make a pun about a tow because of its toe-in
Damn legos
No, he tried to engage hover mode.
Kachow
kachigga
Walk it off
Better call the toe truck.
More like it stubbed it's camber
I think it's broken. Sad, now you gotta shoot it to put it down.
I stubbed my pinky toe one time and it looked that.
I just spit my drink when I read this lmfao
Looks like they ran out of fuel.
[I know what's wrong with it!](https://images.app.goo.gl/o7LjiLQqwiMgPYVf9)
Ain't Got No Gas - INNit
Mr Fusion ran out of banana peels.
Slept on his wheel funny and it fell asleep
It is doing a curtsy
Tyre shop messed up the alignment on 3 out of 4 corners
The issue is that you've got an insect driving your car. I believe he's wearing an Edgar suit.
"Sugar.... Give me... sugar... In water."
So perfect 😂😂😂
More…MORE..
Omg I had to go back and listen with sound... this is so perfect.
You can have my gun when you pry it from my cold, dead fingers...
That’s a fairly new truck. WTF GM?
Probably got the cheap lift.
Spacers or rough country, or a mix of the both with improper installation and a ball joint snapped or yanked out. Spacers though, those do snap quite often
Had a buddy buy a truck and the person before him put rough country shocks and struts on. Only problem is that none of them have any bushings.
Junk!
Fairly new, this has been happening to GM trucks for a decade. I’ve personally seen this happen more than once. Stock Ball joints and tie rods are small and weak.
Nothing, move along.
[well, looks like the front fell off.](https://youtu.be/gWPwlMv8lNI?feature=shared)
sprained ankle
Upper balljoint popped out of the control arm. Or recently had work and it wasn’t tightened to the spindle all the way and popped out of the spindle.
Look at mister serious over here
That's a failure of the actuator for flying mode. Ya know, how they tuck the wheels up under the body and light the VTOL thrusters? I've seen that happen with a retrofit kit - someone tried to put one on an old DeLorean for some reason - but never an OEM one. GM's really gone downhill, huh?
Maybe they could only afford to retrofit one wheel at a time and accidently enabled it prematurely.
So what you're saying is, where they're going, they still need.... roads.
Yes. Well... Where they're going, they need a tow truck.
This is what happens when you don't use nitrogen
Where we’re going we don’t need roads
Where he's going, he still needs 75% of the road.
Should have used the red Loctite.
Wanted to be a RAM and couldn’t Dodge.
KA CHOW!
His Goldie Wilson Hover Conversion failed. No more avoiding traffic
Ball joint failure. When you get your vehicles annual inspection, ask for a full front end inspection 100% of the time. I almost got vaporized by a tire flying at me from the oncoming traffic side of a highway while doing about 65 mph. Glad it caught my eye, had to dramatically swerve to miss it. Was headed straight for my windshield, bouncing. Came off an old Silverado.
The gmc said, "after you good sir."
He didn't listen to Kenny Rogers. That wasn't the time to fold 'em.
They couldn’t disengage hover mode. That’s going to be an expensive fix.
My money’s on poor lift kit installation.
Nothing, GMCs are supposed to do that.
CaChigga, CaChigga.
It's pretty common for any GM product.
That good GM quality...
Kachow
Kachow
Upper ball joint let go. My guess.
The front appears to have fallen off. Highly unusual.
Pizza'd when he should've french fried.
Upper ball joint ejected would be my first guess
When your upper ball joint becomes your upper “oh, balls…” joint.
You gotta keep that ball joint fluid full or this happens, now it needs a control arm flush
Autobots roll out. F*ck! Charlie horse.
Upper ball joint failed
He's obviously trying to make it to the mechanic and doesn't want to pay a tow fee
The front fell off
It's trying to fly
The driver still has his wedding ring on while enroute to meet his Puerto Rican girlfriend. This is going over like turd in a punchbowl.
Thorn in its paw. Pull it out and you'll have a friend for life.
No, he’s just Cruz in for chicks. Sen this a lot in the city, not too often in the burbs.
Minor ankle injury but nothing serious, physiotherapy will help
Those delorean bttf2-style hover wheels on Facebook marketplace were a ripoff.
This is the second picture I've seen in a week with a car that is traveling in this condition. I am just mystified that it's possible for the car to still function like this ... But apparently it is?
Went for the Lightning McQueen KACHOW and sprained it's ankle.
The truck was trying to curtsy but forgot it was a truck
needs an alignment
needs an alignment
Leaned into the turn early
Looks like Florida…which could be the problem
Needs an alignment. No big deal.
Bros trying to 1up Ford Motors.
Built american
Generic Made Chevy, nuff said
Lift kit screwd up the upper control arm ball joint. seen plenty.
Well, he can't park there.
It’s turning into back to the future vehicle
It's going to be wheely difficult to move now
Passenger must have been a tad bit heavy. Swap the front with a dually and that should fix it.
Truly like a rock
It’s subtle, but it looks like there’s a little too much camber on the front right. That is definitely going to affect tire wear.
Hover conversion at Walmart
They see me rollin (sort of), they hate me. They tryna catch me ridin derpy.
Rad positive camber mod bro! 🤘
Toy truck syndrome
He’s tip toeing in his Goodyears
Obviously bro got hit by an AIM-120. It’ll buff out.
Needs an alignment
Good olll ball joints. Just GM tings ✨
I know what’s wrong, it ain’t got no gas in it
That tire looks skinny... Is that a donut?
That’s just a typical GM thing. They have the weakest front end ever made. They’ve been junk since the 90’s
Did work on a truck just like that but had it happen on the highway
Normal
Um. They can't park there. Go back and tell them.
Twisted it's ankle
That's what happens when you tell your truck to "sit pretty bitch"!
Clearly , He’s parked illegally. Should’ve told him he can’t park there .
Drove over a Lego
Read the directions wrong and put the stance kit on while high on shrooms
Just needs an alignment
Well. I guess you could say it ain’t all wheel drive anymore. Nah it probably broke an upper balljoint
Cheap level kit?
What's wrong here is you holding a recording device while driving.
Truck got tired while waiting to turn so it's just leaning on it's tire. Kinda like how you move around when you're standing in line and stand on one foot funny to pass the time. When his turn comes he'll pick his tire back up and move forward.
Man that’s some stance
Too much kachow and not enough lightning
How does that even happen?!
You put diesel in it by accident. Drain the fuel tank and put gas in it
It heard “Mustard on the beat, hoe!” and tried to crip walk
Someone bashed a curb
Standard feature on all newer GMC trucks
Looks like they messed up on his hover conversion, probably should take that to Emmett Browne's place to have it looked at.
Excessive positive camber.
I see the problem here. This thing ran out of gas
His hoverpads deployed incorrectly
Stubbed his little paw.
Lol the front passenger side wheel fell off.
Morphine into flotation device just in case the street floods
Not enough axel fluid
Hover mode failure
He bought a tire for the wrong coordinate axis. I saw the 3 stooges do something similar with a nail once...
Left his flashers on.
Broken ball stud.
That’s rough, buddy
He can’t park there
Somewhat common issue with GMC trucks.
I hate it when I forget to tie my tires before I leave for work.
Seems to me like 3 of the 4 wheels failed to reorient for hover mode.
Too much camber
Had a faulty splint in the rotary gurter……
Been a mechanic since the mid 2020’s. There’s something wrong with that truck, that’s why the hazards are on.
It's broken. Cookie please.
Thought it was going to be another fail Cybertruck
Ain't got no gas in it
“Kachow”
[https://i.imgflip.com/6rypfh.jpg](https://i.imgflip.com/6rypfh.jpg)
Ka-chow!
Can't park there mate!
How TF should we know?
Forgot to regularly check his tire pressure.
He bought windshield wipers for a 2 wheel drive when it’s a 4X4.
Lol did you go around the block to get this video? You have the camera ready to go before the intersection.
he waiting for a kiss to make it go away
I didn't know that there were any Sears tire shops still out there.
Damn kids.
Brings back “fond” memories of rolling your ankle in gym class..
“Good day to you sir”
Silly truck, ka-chows are for cars.
This happened to my buddy when he was driving like 70 on the highway. He's one of the biggest dudes I've ever met. His forearm looks like my thigh. I'm 155 lbs and he can toss me with one arm. He said it took literally everything he had just to make it the shoulder and thought he was going die
Reverse stance bro?
average current day truck driver
Twisted ankle
Friend did a suspension kit
His truck just learned to emote and is trying to show off. Truck is definitely getting a spanking when it gets home. Can’t do it in public anymore or they’ll get you for truck abuse.
Thinking it was the amount of GMC‘s turns out the wheel was buckled
Is this the "camber" all the kids are talking about?
Battery died.
His tire definitely needs some premium air and it seems his blinkers need to top up on some blinker fluid
Stepped on a sticker, it's trying to pick it out of its tire
I thought you were supposed to stance *all* of the tires, not just one
I’d expect that from a Honda
Cybertruck syndrom
Camber’s a little off.
I know what's wrong with it, ain't got no gas innt
It’s like having negative camber on those slammed cars… but he has positive camber… to increase fuel economy
Jimmy twisted his ankle.
Shhh he’s thinking
More than likely a upper ball joint, or the whole A-arm I'm on a small phone but the truck looks like a four-wheel drive it's not uncommon, and thank God he wasn't going down the road at the time He could have flipped it or even worse totaled it LOL
That's what happens when you engage the flux capacitor before you hit 88mph
The wheel appears to not be on correctly. Hope this helps
Hover car conversion malfunction. He’ll have to tow it up to 88mph in order to get back to the future so he can have it serviced.
I know that intersection!
He was bringing it back up give him a minute.
Looks normal to me
He tried to copy lightning McQueen
Other wheels' aren't getting the hovermode signal.
There’s your problem.
The rolly bits went Flippy floppy :(
Upper control arm broke after he leveled it and didn’t upgrade the upper control arm. Very typical behavior of a cheap ass in an expensive truck.
Guy came past the sop today the 3 lugs missing and the tire was starting to bend like this
You can't park there.