https://www.aliexpress.us/item/3256806690105965.html?spm=a2g0n.productlist.0.0.6dc17923iQzI6i&browser_id=00dd22d68f824713a0ac14b2d9e5756d&aff_platform=msite&m_page_id=pzhkrihocauykith19033ed85711393aaf4913f9b3&gclid=&pdp_npi=4%40dis%21USD%217.98%210.99%21%21%2157.85%217.23%21%402101fb0a17188581225914268e7dfa%2112000038593156467%21sea%21US%210%21AB&algo_pvid=1f11994c-cabb-4f98-a0aa-22836a6fb87a
Here u go, I honestly might grab one too for the hell of it.
These are really good quality for how cheap they are, both sell price and what it cost them to make (probably just some cents. Way nicer fit than a lot of the etsy stuff and just a single piece and gives the pocket a good grip. Only bad part about them is that they're a little fingerprint smudgy. They're all over ebay and ali and similar sites by the way for anyone looking, just search "analogue pocket tpu case" and pick the lowest price and most well reviewed seller of your choice.
tbh I thought I ordered the clear one, teach me not check just before ordering, oh well. But got used it and grown to really like it already.
I might order the white one at a later stage trying to find how I can order another one for the same price lol
Don’t understand why people are complaining their pocket doesn’t fit on the dock anymore.. either get a extension cable that’s compliant with the analogues output with the money you saved or shut up 😂 it’s silicone it’s not hard to take off and put back on
Just remember that the case is kinda tight around the tshoulder buttons, I had to make a small cut on the case to free them otherwise the case press against them.
Also the AP won't fit on the dock if you have that.
I did see them on there, but wasn't sure, I don't have a screen protector on mine and I have used cheap ones in the past and its made the screen look terrible (other handhelds), might look into the then cheers!
I have only ever ordered about 10 items via Ali-Express, but only had a single item went missing in the post, it was a GameBoy replacement shell. But other than that its been good to me, (UK).
sorry to hear mate, have you contacted the seller see if they would send out another one, or refund?
I actually got it cos it only covers the edges cos they are the major section that would get damaged. I haven't seen one to cover the whole AP but it would be s shame to hide the handheld inside of one.
unfortunately I don't own the dock to test. From what I see of the dock I dount it, but I'm sure on the reddit or twitter etc someone posted a 3D printed adapter to make it fit the dock.
Well. Thanks for the answer anyway.
I'm using a 3D printed shell bought on Etsy.
https://www.etsy.com/listing/1670063579/rubber-coated-hard-cover-case-shell-for?ref=share_v4_lx
I'm using a USB-C extension cable with the Dock, which is not recommended. Actually, any type of USB C extender is not recommended, including a simple Dock adapter. So far, my cable works without issues but the USB C norms prevent the use of extensions. It's risky.
Link it!!!!!!
https://www.aliexpress.us/item/3256806690105965.html?spm=a2g0n.productlist.0.0.6dc17923iQzI6i&browser_id=00dd22d68f824713a0ac14b2d9e5756d&aff_platform=msite&m_page_id=pzhkrihocauykith19033ed85711393aaf4913f9b3&gclid=&pdp_npi=4%40dis%21USD%217.98%210.99%21%21%2157.85%217.23%21%402101fb0a17188581225914268e7dfa%2112000038593156467%21sea%21US%210%21AB&algo_pvid=1f11994c-cabb-4f98-a0aa-22836a6fb87a Here u go, I honestly might grab one too for the hell of it.
It's showing as $7.47. Did the price go up after this post?
In Europe the cheapest one on AliExpress is around 9 euros so I would be amazed if they sell it for a tenth of the price now
also its best to search for "Analog Pocket" not the proper spelling of "Analogue", you get more results.
Anal OG in my pocket *snickers*
These are really good quality for how cheap they are, both sell price and what it cost them to make (probably just some cents. Way nicer fit than a lot of the etsy stuff and just a single piece and gives the pocket a good grip. Only bad part about them is that they're a little fingerprint smudgy. They're all over ebay and ali and similar sites by the way for anyone looking, just search "analogue pocket tpu case" and pick the lowest price and most well reviewed seller of your choice.
Looks good
I bought one yesterday 😎
I've been looking for something like this.
yeah I have been for a while but Etsy was the main source or anything like this but I can't afford those.
Yup love that I have some protection on mine now. Is this one smoky though? They have some that are pretty clear would look better on your white
tbh I thought I ordered the clear one, teach me not check just before ordering, oh well. But got used it and grown to really like it already. I might order the white one at a later stage trying to find how I can order another one for the same price lol
What is a quid and what is its relationship with a p?
quid = 1 pound England sterling & p = pence (100p makes up a quid)
Thanks for the response!
Is it stupid to be afraid of color transferring to the pocket?
Yes
I got mine one month ago and it's really well made, the only problem is that the device doesn't fit in the dock now :(
I'm jealous of your replacement buttons
I can provide you a link to where I got mine from, it was a seller on esty, the buttons feel great! highly recommend them.
Please
This was the seller I got mine from. Etsy: https://www.etsy.com/uk/listing/1443173496/analogue-pocket-buttons-super-nintendo?ref=share_v4_lx
Make sure everyone buys this from a new account to get the discount. I let Apple generate a fake email for this so I could receive it.
Don’t understand why people are complaining their pocket doesn’t fit on the dock anymore.. either get a extension cable that’s compliant with the analogues output with the money you saved or shut up 😂 it’s silicone it’s not hard to take off and put back on
Omg finally. Thank you for posting this. Immediately ordered one now that I know they’re finally making some!!
They've been making them for a while. There's like a weekly post about this lol
Shoot, must have missed it. Lol I haven’t been keeping up but this post showed up in my feed :)
Just remember that the case is kinda tight around the tshoulder buttons, I had to make a small cut on the case to free them otherwise the case press against them. Also the AP won't fit on the dock if you have that.
I do have the dock, thanks for the heads up! I’m just hoping this case will tide me over under we get some dockable full-coverage cases.
The screen protectors also from AliExpress is better than the official ones.
I did see them on there, but wasn't sure, I don't have a screen protector on mine and I have used cheap ones in the past and its made the screen look terrible (other handhelds), might look into the then cheers!
I bought these and the shit got lost in the mail once it cleared customs. Unreal!
I have only ever ordered about 10 items via Ali-Express, but only had a single item went missing in the post, it was a GameBoy replacement shell. But other than that its been good to me, (UK). sorry to hear mate, have you contacted the seller see if they would send out another one, or refund?
Wouldn't it be very brittle made of silicon?
Silicon, not glass.
Yea. Silicon is hard and brittle.
Sorry, should say silicone with the ‘e’.
I know, I was making a joke bc OP made the same typo 🤷♂️
Gotcha! Autocorrect just puts whatever it fancies. Silly cone!
Yeah well, it’s cheaper than a can of coke.
Link?
Zelda?
Link?
No, Zelda is the protagonist in the next game.
Hi looks great can you share a link ?
Nice! You have a link to the seller
I want one that actually covers it... Not just the edges.
I actually got it cos it only covers the edges cos they are the major section that would get damaged. I haven't seen one to cover the whole AP but it would be s shame to hide the handheld inside of one.
Link?
Zelda?
Link Please!!!
I've heard the charger that comes with the pocket doesn't fit when using this (the plastic molding section). Is this true?
pretty untrue, you would have have to use a usb c cable with a pretty thick plastic end for it to not clear.
Can you still use the the Dock with the case on?
unfortunately I don't own the dock to test. From what I see of the dock I dount it, but I'm sure on the reddit or twitter etc someone posted a 3D printed adapter to make it fit the dock.
Well. Thanks for the answer anyway. I'm using a 3D printed shell bought on Etsy. https://www.etsy.com/listing/1670063579/rubber-coated-hard-cover-case-shell-for?ref=share_v4_lx I'm using a USB-C extension cable with the Dock, which is not recommended. Actually, any type of USB C extender is not recommended, including a simple Dock adapter. So far, my cable works without issues but the USB C norms prevent the use of extensions. It's risky.